Instruction/ maintenance manual of the product SRP-770II Samsung
Go to page of 19
KA04-00019E Rev. 1.02 ٻ ڌ ٻ USER’S MANUAL SRP-770II LABEL PRINTER www.samsungminiprinters.com ٻ.
ٻ ڍٻ Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage. Violating following instructions can cause serious injury or death. Do not plug several products in one multi-outlet.
ٻ ڏٻ Table of Contents 1. Unpacking & Repacking ......................................................................... 5 2. Samsung Label Printer ................................................................... 6 3. Connecting the Power Supply .
ٻ ڑٻ 2. Samsung Label Printer Feed Button Cover Peel-off Status Indicator Cover Open/Close Power Switch Printer Head Paper Holder Paper Guide Peel-off Sensor Paper(gap) Sensor Paper Adjuster Power Connector Interface Connectors [RS-232C, IEEE1284, USB] Dip Switch OvPG Auto Cutter ٻ ڒ 3.
ٻ ړٻ 4. Connecting the Interface Cable Universal Serial Bus (USB) ٻ Serial Interface RS-232 default setting is 19200 baud, no parity, 8 data bits and 1 stop bit ٻ Parallel Interface ٻ ٻ ٻ ڔ 5. Installing or Replacing the Paper Roll 1. Open Cover 2.
ٻ ڌڋٻ 6. Setting The Dip Switches 6-1. Setting the Dip Switches The Dip Switches are located on the bottom of the printer. The Dip Switches are used to set the Printer to perform various functions. Follow these steps when changing Dip Switches setting : 1.
ٻ ڌڍٻ 8. LED Display LED display indicates the printer status. 1. Green LED on - The printer waits for the data from Host (PC) in normal mode. 2. Orange LED on - It means paper gap sensing error. It becomes on when the pri nter fails to detect the paper or paper jam occurred.
ٻ ڌڏٻ 11. The Peel-off This function is used to separate label from liner automatically. CAUTIONS: 1) Peeler is for Label Paper only. 2) When the peeler switch is on, label is not printed before when the previous printed label is taken off from the peeler.
ٻ ڌڑٻ 13. Auto Cutter (Option) Auto cutter should be used for cont inuous paper only. ( i.e. roll paper) 1. Open the Dip switch cover, and make the switch 1 number 7 “On”. (Refer to printer mode setting at Chapter 6.) 2. Put a paper roll into the printer and close the cover.
ٻ ڌړٻ 15. Memory Switch Setting 1. Models : SRP-770II, SRP-780 2. Features It helps users through the setting of code pag es, serial setting, paper size and p rint density as necessary. 3. How to use ཛ Press Get Status button and it d isplays the current setting.
ٻ ڍڋٻ 16. Install and Uninstall Windows Driver 13.1 Download install-program from Website (1) Execute web-browser.(Ex: Internet Explorer) (2) Type http://www.bixolon.com (3) Connect website. (4) In “Quick menu”, click download button. (5) Download “SRP-770II_V3.
ٻ ڍڍٻ (5) Select interface (port) type. (6) Please click “Continue Anyway”. * If you can see this dialog, don’t worry comment of dialog. Printer and driver works well. Please click “Continue Anyway” button. (7) Please reboot computer. ٻ ڍڎ 13.
ٻ ڍڏٻ (3) Click “Install” Button. (4) Select operating system type. ٻ ڍڐ (5) Select “USB” interface (port) type. (6) Please turn-off printer and turn-on printer. (7) When “Add new hardware wizard” for install “USB print support” driver pops up, click “Next” button.
ٻ ڍڑٻ (8) Please click “Next” button three times. (9) When “USB print support” driver is installed, your system automatically restart after 10 seconds. (10) After the system restart, please turn-on printer. B. Windows NT/2000 (1) Double click “SRP-770II_V3.
ٻ ڍړٻ (5) Select “USB” interface (port) type. (6) Please turn-off printer and turn-on printer. * If you can see this dialog, don’t worry comment in dialog. Printer and driver work well. Please click “Yes” button. ٻ ڍڔ C. Windows XP/2003 Server (1) Double click “SRP-770II_V3.
ٻ ڎڋٻ (4) Select operating system type. (5) Select “USB” interface (port) type. (6) Please turn-off printer and turn-on printer. * If you can see this dialog, don’t worry comment in dialog. Printer and driver work well. Please click “Continue Anyway” button.
ٻ ڎڍٻ (8) Please click “Next” button until you can see “Finish” button. *If you can see this dialog, don’t worry comment in dialog. Printer and driver work well. Please click “Continue Anyway” button. (9) Please click “Finish” button.
ٻ ڎڏٻ 13.4 Printer Settings 1) Measurement: Select measurement of “T op Margin” . (Inch or millimeters) 2) T op Margin: top margin value of paper 3) Density: Select density of printing quality . (0 ~ 20) 4) Media T ype: Select paper media type.
ٻ ڎڑٻ ૺ Specification ૻ Printing method Thermal line printing Dot density 203 dpi (8 dot/mm) Printing width 25.4 ~ 101.6 mm Paper width 38.1 ~ 104 mm Printing speed 127 mm/sec Receive Buffer S.
An important point after buying a device Samsung SRP-770II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SRP-770II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SRP-770II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SRP-770II you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SRP-770II will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SRP-770II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SRP-770II.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SRP-770II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SRP-770II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
