Instruction/ maintenance manual of the product SRP-275 Samsung
Go to page of 39
User's Manual SRP-275 Imp act Printer Rev . 1.04 http://www .samsungminiprinters.com.
Rev . 1.04 - 2 - SRP-275 ■ Safety Precautions In using the present appliance, please keep the following safety regul ations in order to prevent any hazard or material damage. W ARNING Violating following instructions c an cause serious injury or death.
Rev . 1.04 - 3 - SRP-275 CAUTION Violatin g follow ing inst ructions c an cause sli ght wound or dam age the app liance . Do not use the printer when it is ou t of order . This can cause a fire or an electro cution. • Switch off and unplug the printer before calling your dealer .
Rev . 1.04 - 4 - SRP-275 All rights reserved. No part of this publicati on may reproduced, stored in a retrieval, or transmitted in any form or by any means, elec tronic, mechanical, photocopying, recording, or otherwise, without the prior wr itten permission of BIXOLON.
Rev . 1.04 - 5 - SRP-275 ■ EMC and Safety standards Applied Product Name : SRP-275 The following standards are applied only to the printers that are so labeled.
Rev . 1.04 - 6 - SRP-275 ■ Introduction The SRP-275 is a high- quality impact printer . This one-station printer has the following features. • Compact design and light-weight. • High-speed printing using logic-seeking (5.1LPS). • Easy to use : Easy paper loading.
Rev . 1.04 - 7 - SRP-275 ■ T able of Content s 1. Setting Up the Prin ter······························································.
Rev . 1.04 - 8 - SRP-275 1. Setting Up the Printer 1-1 Unpacking Y our printer box should include the it ems sho wn in the illustration below. If any items are damaged or missing, please cont act your dealer . 1-2 Choosing a place for the printer • Avoid locations that are subject to direct sunli ght or excessive heat.
Rev . 1.04 - 9 - SRP-275 1-3 Using the operation panel Most of the functions of this printer are governed by software, but you ca n monitor the printer s statu s by looking at the lights on the control panel and for some procedures you will u se the buttons.
Rev . 1.04 - 10 - SRP-275 2. Connecting the cables 2-1 Connecting the AC Adaptor CAUTION Before connecting the printer to the power supply, ma ke sure that the voltage and power specification s match the printer’s requirem ents. Using an incorrect pow er supply can cause seri ous damage to the printer.
Rev . 1.04 - 1 1 - SRP-275 2-2-1 Serial Interface (RS-232C) IFC-S TYPE Interface connector Drawer kick-out Connector (F.G) 1 (TXD) 2 (RXD) 3 (RTS) 4 (CTS) 5 (DSR) 6 (S.G) 7 (DTR) 20 1 (F .G) 2 (RXD) 3 (TXD) 4 (DTR) 5 (S.G) 6 (DSR) 7 (RTS) 8 (CTS) PRINTER SIDE (25Pin) HOS T SIDE (9Pin ) Pin No.
Rev . 1.04 - 12 - SRP-275 2-2-2 Parallel Interface (IEEE1284) IFC-P TYPE Interface connector Drawer kick-out Connector Pin no. Source Comp atibility mode Nibble mode Byte mode 1 Host nS trobe HostClk .
Rev . 1.04 - 13 - SRP-275 2-2-3 USB Interface IFC-U TYPE Interface connector Drawer kick-out Connector Pin No. Signal name Assignment (Color) Function Shell Shield Drain wire Frame ground 1 VBUS Red N.
Rev . 1.04 - 14 - SRP-275 3. Setting the Switches 3-1 Setting the DIP Switch Although the factory settings are best for almost all user s, if you have special requi rements, you can cha nge the DIP Switch. Your printer has two sets of DIP Swit ches. The functions of the switches are shown in the following table.
Rev . 1.04 - 15 - SRP-275 3-1-2 DIP Switch setting for Citizen(iDP 3550) mode • DIP S witch 1 Sw it ch Function ON OFF Default 1-1 1-2 Emulation Selection (*1) Refer to the following table OFF 1-3 A.
Rev . 1.04 - 16 - SRP-275 3-1-3 DIP Switch setting for Star(SP500) mode • DIP S witch 1 Sw it ch Function ON OFF Default 1-1 1-2 Emulation Selection (*1) Refer to the following t able OFF 1-3 Auto c.
Rev . 1.04 - 17 - SRP-275 3-1-4 Changing the DIP Switch setting If you need to change settings, follow the st ep s below to make your changes. CAUTION Turn off the printer before removing the DIP Switch co ver to prevent an electri c short, which can damage the printer.
Rev . 1.04 - 18 - SRP-275 3-2 Setting the Memor y Switches 3-2-1 Memory Switch setti ng for Epson(ESC/POS) mode This printer has “Memory Switch” set which is sof tware switches. Memory Switch set has “MSW 2”, “MSW 8”, “Customize value”, “Se rial communication co ndition”.
Rev . 1.04 - 19 - SRP-275 • Memory Switch 8 Sw it ch Function On Off 1 Upside down On Of f 2 Font Selection Font B Font A 3 Selection Paper End Buzzer Off On 4 Reserved Fixed to Off 5 Selection of t.
Rev . 1.04 - 20 - SRP-275 • Memory Switch Setup Mode The following items are specified in the Memory Switch setup mode: Basic Serial communication con dition (Serial communication ) - T ransmission .
Rev . 1.04 - 21 - SRP-275 • Procedure of Memory Switch setting ① Re sett i ng B as i c S e r i a l I nt e rfac e ? Baud ra te Cu rrent s e tt i ng: 96 00 b p s 19 20 0b p s 48 00b p s 24 00b p s H.
Rev . 1.04 - 22 - SRP-275 3-2-2 Memory Switch setting for Star mode • Settings Memory Switches are from MSW 0 to MSW 8. They are stored in non-volatile memo ry (flash memory ).
Rev . 1.04 - 23 - SRP-275 • Default Settings The default settings for Memory Switch 0 to Memory Switch 8 are shown below . Settings vary for single byte character countries (s ta ndard specifications (SBCS )) and for double-byte character count ries (Chinese char acter specification s (DBCS)).
Rev . 1.04 - 24 - SRP-275 • Function - Memory Switch 0 Bit Function 0 1 F~C Reserved B~A Red and Black (inverted black and white) Commands (*3) Refer to the following table 9~5 Reserved 4 Country S .
Rev . 1.04 - 25 - SRP-275 - Memory Switch 1 Bit Function 0 1 F Reserved E~5 4 Zero style Normal Slash zero 3~0 International Cha racters (*1) Refer to the following t able NOTES (*1) International Characters D efault Value Settings MSW1-3 MSW1-2 MSW1-1 MSW1-0 International Characters 0 0 0 0 U.
Rev . 1.04 - 26 - SRP-275 - Memory Switch 3 Bit Function 0 1 F~D C~8 Character T able (*2) Refer to the followin g table 7~2 1~0 <CR> Command Functions (*1) Refer to the following t able NOTES (*1) <CR> Command Functions MSW3-1 MSW3-0 <CR> Functions 0 0 Ignored 0 1 Ignored 1 0 Prints and performs a line feed (same as <LF>.
Rev . 1.04 - 27 - SRP-275 - Memory Switch 4 Bit Function 0 1 F~9 8 Automatic S tatus Fu nction Disabled Enabled 7~4 3 ESC RS a n command function Only Setting Auto-status sent only once 2~1 0 Data rec.
Rev . 1.04 - 28 - SRP-275 4. Ribbon Cassette Installation NOTES Malfunctions and other pro blems may arise if other t han specified ribbon casse ttes are used in the printer . The W arranty may be void if other than specified ribbon ca ssettes are used.
Rev . 1.04 - 29 - SRP-275 5. Roll Paper Installation CAUTION Do not touch the auto cutter blade when you open rea r cover. 1) To prevent data loss, make sure that the printer is not receiving data. 2) Open the rear cover by pushing the ope n button. 3) Remove the used paper roll core if there is one.
Rev . 1.04 - 30 - SRP-275 6. Changing the paper width Sc rew( 3x6 )(2p ieces ) F ra me pa pe r c on tr ol 57.5m m 69.5mm 7 6mm(d ef ault ) 1) Open the rear cover . 2) Remove the frame pa per control by loosing the two screws(3×6) . 3) Reattach the frame paper control in you want .
Rev . 1.04 - 31 - SRP-275 7. Installing the wall mount (Option) Brack et han ger Screw( 3 x5) (4pi ec es) Brack e t m o unt Screw( 4x10) (8pi eces) 1) Turn the Set over and attach the Bracket hanger to the Frame ba se then tighten four screws. 2) Attach the Bracket mount to the wall firmly with the eight screws.
Rev . 1.04 - 32 - SRP-275 8. Self Test The self test let you know if your printer is operating properly . It checks the printing quality , ROM version, DIP Switch settings, mem ory switch sett ings and stat istic data.
Rev . 1.04 - 33 - SRP-275 9. Hexadecimal Dumping • Hexadecimal dump This feature allows experience d users to see exactly what data is coming to the printer.
Rev . 1.04 - 34 - SRP-275 10. Specification 10-1 Printing specification Item Description Remark Printing method Serial impact method Head wire 9 pin serial type Dot pitch 0.352mm (1/72”) Dot wire diameter 0.3mm (0.01”) Printing direction Bidirectional (logic seeking) with friction feed Characte rs per line Ma x.
Rev . 1.04 - 35 - SRP-275 10-4 Electrical characteristics Item Description Remar k SMPS Supply voltage 24VDC Operating Mean : Approximately 0.5A Peak : Approximately 1.5A Current consumption (at 24V , except for drawer kick-out driving) S tandby Mean: Approximately 0.
Rev . 1.04 - 36 - SRP-275 10-7 Dimensions & weight • Dimensions • Weight Approx. Wt. : 2.5 kg Shipping Wt. : 4.0 kg 10-8 Optional features The optional features either replace a st andard feature or enhance the operation of the printe r . All optional features are installed at the factory and must be selected wh en the printer is ordered.
Rev . 1.04 - 37 - SRP-275 11. Appendix - Troubleshooting This chapter gives solutions to so me printer problems you may have. 11-1 ERROR LED blinking pattern The printer stops all printe r operations for the sele cted paper section, goes off lin e, and the ERROR LED blinks when an error is detected.
Rev . 1.04 - 38 - SRP-275 • Errors that are impossible to recov er Error Description ERROR LED blinking p attern Recovery R/W error in memory or gate array After R/W checking, the printer does not work correctly . Writing to, reading out, or erasing the NV memory for image scanning results does not work correctly .
Rev . 1.04 - 39 - SRP-275 11-3 The printer stops printing • If the ERROR LED is on (but not blinking), the printer is of f line. Check to see that the covers are closed and check the pap er state. See Chapter 5 for instruct ions on inst alling or replacin g the paper roll.
An important point after buying a device Samsung SRP-275 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SRP-275 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SRP-275 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SRP-275 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SRP-275 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SRP-275, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SRP-275.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SRP-275. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SRP-275 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
