Instruction/ maintenance manual of the product AT3000.1 AutoTek
Go to page of 13
EVOL UTION OF POWER SUPER SPOR T A T-SERIES AMPLIFIERS A T1000 / A T1500 / A T1200 / A T2000.1 / A T3000.1 R.
SUPER SPOR T A T-SERIES AMPLIFIERS INDEX P AGE Autotek is proud to introduce the finest high end car audio products available and would like to thank you for your continued support. The Super Sport A T -Series amplifiers have been designed to a very high level of performance, with features unavailable in any other products.
GENERAL INST ALLA TION PROCEDURE 1 System Design Installation The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link.
2 AMPLIFIER FEA TURE DESCRIPTIONS SUPER SPORT A T -SERIES AMPLIFIERS: ! ! ! ! ! ! ! ! Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged All Autotek amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and amplifier DC faults indicated by the red “ PROTECT” LED.
A T1000 / A T1500 / 2 CHANNEL AMPLIFIER APPLICA TIONS 3 FULL RANGE MONO This is the most basic application for the SUPER SPORT Series 2 channel amplifiers. 1. Interconnect cable checklist: Connect the LINE INPUTS to the Radio/CD with good quality RCA cables.
A T1000 / A T1500 2-CHANNEL AMPLIFIER APPLICA TIONS 4 Stereo high pass with mono low-pass in a 2 way active, or bi-amplified system 2 CHANNEL HIGHS AMPLIFIER 2 CHANNEL SUB BASS AMPLIFIER In this application we will use a 2 channel amplifier for the high frequencies, and Lows amplifier: a second one for the low frequencies, or mono sub bass.
5 A T1200 / 4 CHANNEL AMPLIFIER APPLICA TIONS 4 CHANNEL FULL RANGE SYSTEM 2 or 3 CHANNEL FULL RANGE SYSTEM Level control checklist: Here we show how to use the 4 channel amplifiers as straight forward discrete 4 - Refer to the section “Setting up systems after installation for best performance” channel full range units.
FULL RANGE STEREO LINE INPUT NOT USED Y -ADAPT OR Note: Y ou can use the Radio/CD designated mono line output or a full range stereo line output. For full range stereo line output, you will need an optional “Y -Adaptor” as shown P ARALLEL MONO SUBWOOFERS 2- OHMS EACH MINIMUM GND REM +12V POWER INPUT FUSE SPEAKER OUTPUT + + - - 6 A T2000.
7 15 .1 .1.
8 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE A T2000.1 / A T3000.1 General: At this point you are ready to get more specific on the settings for your amplifier . Subsonic: This setting acts as a low frequency cut off for your system bass reproduction.
9 TROUBLESHOOTING A SYSTEM The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Autotek amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit off, and back on.
Maxxsonics Limited W ar r anty As the manufacturer of Maxxsonics, Autotek, Cr unch, MB Quar t and Hifonics car audio products Maxxsonics USA Inc. War r ants to the original consumer purchaser the amplifier to be free fr om defects in ma terial and workmanship for one (1) Y ear from date of pur chase.
P ART#S608.
An important point after buying a device AutoTek AT3000.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AutoTek AT3000.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AutoTek AT3000.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AutoTek AT3000.1 you will learn all the available features of the product, as well as information on its operation. The information that you get AutoTek AT3000.1 will certainly help you make a decision on the purchase.
If you already are a holder of AutoTek AT3000.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AutoTek AT3000.1.
However, one of the most important roles played by the user manual is to help in solving problems with AutoTek AT3000.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AutoTek AT3000.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
