Instruction/ maintenance manual of the product RF-520LCD Auto Page
Go to page of 19
RF - 520 LCD 2 - WAY AM/AM LCD COMMUNICATION PROFESSIONAL VEHICLE SECURITY SYSTEM OPERATIONS MANUAL.
2 Introduction 3 Changing Battery XT - 72S Standard Transmitter 3 Remote Transmitter Operation 4 LCD Transmitter Operation 5 Button Lock LCD Transmitter 5 LED Display 5 Chirp Indicators 5 Parking Ligh.
3 Congratulations on your purchase of the RF520LCD vehicle security system. We sincerely hope the purchase of the RF520 security system gives peace of mind to you.
4 WARNINGS: As with any product that performs automatic functions, there are certain safe ty precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control.
5 LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button System Function Remark - (C) System’s Trigger Check Press within 3 seconds - - (C) System’s Status Check Press within 3 seconds (1 second) LCD screen lamp turns on for 5 seconds.
6 ALARM OPERATING CONDITION: Siren / Horn Parking Light LED Doors Starter Dome Light 1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable 2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking Turns on for 30 - sec 3. Trigger Alarming Flashes Slo w Flash Disable Flashes 4.
7 PASSIVE ARMING Active arming / disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after the last door is closed.
8 TWO STEPS DOOR UNLOCK : This feature will independently unlock the driver’s door only when disarming the security system. Pushing the button a second time within 3 seconds will unlock the other doors.
9 TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impact will trigger the warn - away signal. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cranking.
10 SYSTEM’S STATUS CHECK (For two - way transceiver operation only) When you want to check the system’s present status through the LCD screen, Press the transceiver button twice, within 3 seconds press (C) button. It responds with one melody sound, the LCD screen should be illuminated.
11 CHANNEL 5 AUXILIARY CONTROL OUTPUT ( Available Option) Press the transmi tter + button to active Channel 5 function. Channel 5 is a programmable output. This feature, when installed with optional accessories, may be used to operate power windows, sunroofs, etc.
12 LCD REMOTE CONTROL TRANSCEIVER : Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such Obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low out put powered frequency.
13 Door Open Warning Doors are illegally opened (Zone 3) Trunk/Hood Trigger Trunk or Hood is illegally opened (Zone 2) Shock Sensor Trigger Trigger on Shock Sensor (Zone 4) Warn Away trigger T rigger .
14 Screen Lamp ON: Press and hold the button one second, with one melody sound and the LCD screen lamp will turns on for 5 sec. Power Save Mode: While the power save mode, the LCD remote transceiver uses “0” current to save the battery power.
15 Set Up Fixed Count Down Timer: 1. Press the button first, within 3 seconds press and hold the ( ) button for two seconds, the LCD screen will shows icon and timer (ie. 0:10), 2. Press the ( ) button again showing next order time on the screen ( ie.
16 Timer Setting: Example to AM10:30 1. Press & hold the button for 3 seconds, with two - melody sound and the “Hours” digit flashes for adj usting. 2. Press the or button to decrease or increase the “Hour” digit until AM 10 : xx 3. Press the button once again then the “Minute” digit flashes for adjusting.
17 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S . and Continental U.S. Only) 1. AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
18 This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD, which must have complete information to receive warranty service.
19 1815 West 205 th Street Suite 101 Torrance, California 90501 - 1525 Main Office: 310 - 618 - 2002 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.
An important point after buying a device Auto Page RF-520LCD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Auto Page RF-520LCD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Auto Page RF-520LCD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Auto Page RF-520LCD you will learn all the available features of the product, as well as information on its operation. The information that you get Auto Page RF-520LCD will certainly help you make a decision on the purchase.
If you already are a holder of Auto Page RF-520LCD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Auto Page RF-520LCD.
However, one of the most important roles played by the user manual is to help in solving problems with Auto Page RF-520LCD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Auto Page RF-520LCD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
