Instruction/ maintenance manual of the product LE26A456C2C Samsung
Go to page of 62
Country Customer Care Centre Web Site AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK 70 70 19 70 www.
© 2008 Samsung Electronics Co., Ltd. All rights reserved. Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
Contents CONNECTING AND PREP ARING YOUR TV List of Parts ........................................................ 2 Installing the Stand ............................................. 2 Installing the W all Mount Kit ............................... 2 Viewing the Control Panel .
English - 2 List of Parts Please make sure the following items are included with your LCD TV . If any items are missing, contact your dealer . W all mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the W all Mount items.
English - 3 V iewing the Control Panel 1 SOURCE T oggles between all the available input sources (TV , Ext.1, Ext.2, A V , S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control.
English - 4 V iewing the Connection Panel Whenever you connect an external device to your TV , make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. ➣ ➣ The product colour and shape may vary depending on the model.
English - 5 1 PC IN [PC] / [AUDIO] Connect to the video and audio output jack on your PC. 2 COMPONENT IN Connect component video cables (optional) to component connector ("P R ", "P B ", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
English - 6 7 COMMON INTERF ACE Slot When CI Card isn’t inserted in some channels, "Scrambled Signal" is displayed on the screen. The pairing information containing a telephone number , CI Card ID, Host ID and other information will be displayed in about 2~3 minutes.
English - 7 T O OL S 1 T elevision Standby button 2 Selects the TV and DTV mode directly 3 Number buttons for direct channel access 4 One/T wo-digit channel selection 5 + : V olume increase : V olume decrease 6 T emporary sound switch-off 7 Electronic Program Guide (EPG) display 8 Use to quickly select frequently used functions.
English - 8 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3.
English - 9 Y ou can use the TOOLS button to select your frequently used functions quickly and easily . The “T ools” menu change depending on which external input mode you are viewing. 1. Press the TOOLS button. The “T ools” menu will appear .
English - 10 When the TV is initially powered on, several basic settings proceed automatically and subsequently . The following settings are available. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted.
English - 11 9. Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed. When you have finished, press the ENTER button. Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.
English - 12 Storing Channels Manually Not available in DTV or external input mode. Y ou can store television channels, including those received via cable networks. When storing channels manually , you can choose: ♦ Whether or not to store each of the channels found.
English - 13 Not available in DTV or external input mode. Using the Channel Manager , you can conveniently lock or add channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
English - 14 This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. Not available in DTV or external input mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select " Channel", then press the ENTER button.
English - 15 Use fine tuning to manually adjust a particular channel for optimal reception. Not available in DTV or external input mode. 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu.
English - 16 Y ou can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ENTER button again, to select "Mode".
English - 17 Y our set has several settings which allow you to control picture quality . 1. T o select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 16) 2. Press the ▲ or ▼ button to select a particular item.
English - 18 ♦ Black Adjust: Off/Low/Medium/High Y ou can directly select the black level on the screen to adjust the screen depth. ♦ Dynamic Contrast: Off/Low/Medium/High Y ou can adjust the screen contrast so that the optimal contrast is provided.
English - 19 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. 3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 20 ♦ Screen Mode : 16:9/ Wide Zoom/Zoom/4:3 When setting the picture size to "Auto Wide" in a 16:9 wide TV , you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing.
English - 21 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button.
English - 22 Y ou can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. When you insert the head set jack into the corresponding port, you can operate only "Auto V olume" in Sound menu.
English - 23 Y ou can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
English - 24 When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. 1. Press the MENU button to display the on-screen menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
English - 25 Melody / Entertainment / Energy Saving 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 26 ♦ Energy Saving: Off/Low/Medium/High/Auto This feature adjusts the screen brightness depending on the surrounding lighting conditions. − Off : T urns off the energy saving function. − Low : Sets the TV to low energy saving mode. − Medium : Sets the TV to medium energy saving mode.
English - 27 Name the device connected to the input jacks to make your input source selection easier . 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.
English - 28 ♦ This product is only applicable to Finnish, Swedish and Danish broadcasts. Broadcasts are not supported in other countries. ♦ Available in DTV mode.
English - 29 Selecting the Country 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button.
English - 30 Updating the Channel List Automatically Y ou can update the channel list when the broadcaster adds new Services or if you move the TV to a new location. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
English - 31 Updating the Channel List Manually Y ou can specify the channel for a fast channel search. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button.
English - 32 Editing Y our Favourite Channels Y ou can edit your favourite channels using the four colour buttons. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
English - 33 ♦ Renumber (depending on the country) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select " Digital Channel ", then press the ENTER button.
English - 34 Displaying Programme Information While viewing a channel, additional information about the current programme may be displayed. 1. While viewing a programme, press the INFO button. The programme information is displayed. 2. T o exit from banner information, press the INFO button.
English - 35 V iewing the EPG (Electronic Programme Guide) Information The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel.
English - 36 Setting the Default Guide Y ou can preset the default guide style. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ENTER button, to select "Guide".
English - 37 V iewing All Channels and Favourite Channels In the EPG menu, you can display all channels or favourite channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
English - 38 Setting up the Parental Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user . The on-screen menu will instruct you to assign a PIN code (you can change it later , if necessary).
English - 39 Setting the Subtitle Y ou can activate and deactivate the subtitles. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
English - 40 Selecting the Audio Description This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster .
English - 41 Upgrading the Software T o keep your product up-to-date with new Digital T elevision features then software upgrades are periodically broadcast as part of the normal T elevision signal. It will automatically detect these signals and display the software upgrade banner .
English - 42 V iewing Common Interface This contains information on CAM inserted in the CI slot and displays it. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
English - 43 Selecting the Preferred Language (Subtitle, Audio or T eletext) Y ou can change the default value for subtitle, audio teletext languages. Displays the language information for the incoming stream. 1. Press the MENU button to display the menu.
English - 44 Preference This menu consists of 6 sub-menus: Primary Audio Language, Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle Language, Primary T eletext Language, Secondary T eletext Language. Using this feature, users can select one of the languages.
English - 45 The Wind ows displ ay- set tin gs for a typ ica l comp uter are sho wn bel ow . The act ual scree ns on you r PC may be di ffer ent depen din g upon your pa rtic ula r ver sio n of Win dow s and you r part icu lar video card.
English - 46 Setting up the TV with your PC Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 47 Connecting Anynet + Devices The Anynet+ system supports A V devices supporting Anynet+ only . Check if there is an Anynet+ mark on the A V device to be connected to the TV .
English - 48 Setting Up Anynet + The following settings are to use Anynet+ functions. Using the Anynet+ Function 1. Press The TOOLS button. Then Press the ENTER button to select "Anynet+(HDMI-CEC)". Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
English - 49 Scanning and Switching between Anynet + Devices 1. Press the TOOLS button. Then press the ENTER button to select "Anynet+(HDMI-CEC)". 2. Press the ▲ or ▼ button to select "Select Device", then press the ENTER button.
English - 50 Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV . Anynet+ Menu Description View TV Switches from Anynet+ to TV broadcast mode. Select Device Y our TV connects to the corresponding device.
English - 51 Recording Y ou can make a recording of a TV programme using a recorder . Press the button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) The current TV programme is recorded in the W atching TV status. If you are watching video from another device, the video from the device is recorded.
English - 52 Check Points before Requesting Service Symptom Solution Anynet+ does not work. ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only . ■ Connect only one receiver . ■ Check if the Anynet+ device power cord is properly connected.
English - 53 Most television stations provide written information services via T eletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
English - 54 The teletext pages are organized according to six categories: Part Contents A Selected page number . B Broadcasting station identity . C Current page number or search status. D Date and time. E T ext. F Status information. F ASTEXT information.
English - 55 Once the auto wall mount is installed, your TV’s position can be easily adjusted. W all-Mount Adjustment (Sold separately) (depending on the model) TV Rear Panel Auto W all-Mount SERVICE Cable (Not supplied) Entering the menu 1. Press the ▲, ▼, ◄ or ► button on your remote control.
English - 56 Moving to the remembered position 1. Complete Step 1 of “Entering the menu”. 2. Pressing a Colour (Red, Green, Y ellow) button moves the auto wall mount to the saved position. Y ou can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Y ellow (Position 3) buttons.
English - 57 Securing the TV to the W all Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular , ensure your children do not hang over or destabilize the TV ; doing so may cause the TV to tip over , causing serious injuries or death.
English - 58 T roubleshooting: Before Contacting Service Personnel No sound or picture. Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings.
English - 59 T echnical and Environmental Specications Model Name LE26A456 LE32A456 Screen Size (Diagonal) 26 inch 32 inch PC Resolution 1360 X 768 @ 60 Hz 1360 X 768 @ 60 Hz Sound Output 5W x 2 10.
English - 60 Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus. For the power supply and Power Consumption, refer to the label attached to the product.
An important point after buying a device Samsung LE26A456C2C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung LE26A456C2C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung LE26A456C2C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung LE26A456C2C you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung LE26A456C2C will certainly help you make a decision on the purchase.
If you already are a holder of Samsung LE26A456C2C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung LE26A456C2C.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung LE26A456C2C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung LE26A456C2C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
