Instruction/ maintenance manual of the product HT-P29 Samsung
Go to page of 35
Home Theater System with 5 Disc DVD Changer HT -P29 Instruction Manual V I D E O COMPACT DIGITAL AUDIO SAMSUNG ELECTRONICS AMERICA, INC. SER VICE DIVISION 400 V alle y Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) www .samsung.
ENG 12 Saf ety W arnings Precautions Ensure that the AC po wer supply in your house complies with the identification stick er located on the back of your pla yer . Insta ll your play er hor izontally , on a suitable base (furniture), with enough space around it for ventilation (3~4inches).
ENG 4 3 READ INSTRUCTIONS All the saf ety and operating instructions should be read bef ore the appliance is operated. RET AIN INSTRUCTIONS The saf ety and operating instructions should be retained f or future reference . HEED W ARNINGS All warnings on the appliance and in the operating instructions should be adhered to.
6 5 Multi-Disc Pla yback & FM T uner The HT -P29 combines the con venience of m ulti-disc playbac k capability , including D VD , CD , MP3-CD , CD-R/R W , and D VD-R/R W , with a sophisticated FM tuner , all in a single pla yer .
ENG CD-R Discs • Some CD-R discs ma y not be pla yab le depending on the disc recording device (CD-Recorder or PC) and the condition of the disc. • Use a 650MB/74 minute CD-R. Other CD-R media, ma y not be pla yab le. • Some CD-R W (Rewritable) media, ma y not be play able.
ENG 9 Description PREP ARA TION —Fr ont P anel— P ower ( ) button Standby indicator Function button Disc T ra y Open/Close button Direct Play b uttons Disc Change button V olume buttons T uning Do.
ENG 12 Inser t Remote Batteries The remote control can be used up to appro ximately 23 feet/7 meters in a straight line . It can also be operated at a horizontal angle of up to 30 ° from the remote control sensor .
ENG SR SL C L SW R 14 Rear Speakers • Place these speakers behind y our listening position. • If there isn't enough room, place these speakers so the y face each other . • Place them about 60 to 90cm (2 to 3feet) abo ve your ear , f acing slightly downward.
ENG 15 CONNECTIONS Press ST OP button. • When disc is pla yed back, press the ST OP button twice so that “ STOP ” , appears on the display . Press and hold P .
ENG 18 17 CONNECTIONS Example: Analog signal components such as a VCR or TV . Connecting External Components A udio Cable If the external analog component has only one Audio Out, connect either left or right.
ENG 19 CONNECTIONS 23 Press MODE button until the TV indicator lights. TV DVD RECEIVER TV DVD RECEIVER Press the PO WER b utton to tur n on the TV . 56 Press the MODE b utton until the D VD RECEIVER indicator lights. Press FUNCTION button on the main unit or D VD on the remote to select D VD/CD mode.
ENG 22 21 OPERA TION T o stop pla yback, press ST OP during pla yback. • If pressed once, “ PRESS PLA Y ” is display ed and the stop position will be stored in memor y . If PLA Y/P A USE ( ) b ut to n o r ENTER b utton is pressed, pla yback resumes from the stop position.
ENG Data CDs (CD-ROM, CD-R, CD-R W) encoded in MP3/WMA format can be play ed. MP3-CD Pla ybac k 24 23 OPERA TION • Depending on the recording mode, some MP3-CD/WMA files may not play . • T able of contents of a MP3-CD/WMA varies depending on the MP3-CD/WMA trac k format recorded on the disc.
ENG Rotate/Flip Function button: Flip V ertically button: Flip Horizontally button: Rotate 90 ° Counterclockwise b utton: Rotate 90 ° Clockwise Digest Function 2 Press Cursor , , , b uttons to select the desired image and then press ENTER b utton. 1 Press DIGEST b utton during pla yback.
ENG 28 27 OPERA TION Chec king the Remaining Time Press the REMAIN b utton. • F or checking the total and remaining time of a title or chapter being pla yed.
ENG F ast Pla ybac k DV D CD MP3 DV D Press and hold . • Each time the button is held do wn dur ing playbac k, the pla yback speed changes as f ollows: Press SLO W button.
ENG 32 • The A-B Repeat function will not work on an MP3 or JPEG disc. 2 Press Cursor b utton to mov e to REPEA T PLA YBA CK ( ) displa y . • F or a CD , press INFO b utton once. 1 Press INFO button twice. A - A - ? REPEA T : A — A - B REPEA T : A — B • The specified segment will be pla yed repeatedly .
ENG 34 DV D DV D 2 Press Cursor , , , b uttons to mov e to the area y ou want to enlarge . 1 Press ZOOM b utton. • Each time the button is pressed, the zoom le vel changes as f ollows: 3 Press ENTER b utton. Press EZ VIEW b utton. • Each time the button is pressed, the z oom function will switch between On and Off .
• Depending on the number of languages on a D VD disc, a diff erent audio language (ENGLISH, SP ANISH, FRENCH, etc.) is selected each time the button is pressed. 2 Press Cursor , b uttons or numeric b uttons to select the desired audio language. 1 Press INFO button twice.
ENG 38 37 OPERA TION 2 Press Cursor , b utton to mov e to ‘ Title Menu ’ . DV D 1 In Stop mode, press MENU b utton. 3 Press ENTER b utton. • The title menu appears.
ENG 40 SETUP OSD (On-Screen Display) language is set to English by default. Setting the Langua g e 39 * If the language you selected is not recorded on the disc, menu language will not change even if you set it to your desired language.
41 2 1 4 3 In Stop mode, press MENU b utton. Press Cursor b utton to mov e to ‘ Setup ’ and then press ENTER b utton. • Once the setup is complete, you will be taken to the previous screen. Press Cursor b utton to mov e to ‘ TV DISPLA Y ’ and then press ENTER b utton.
ENG • This function works only if a DVD disc contains the rating level information. Press RETURN b utton to retur n to the pre vious lev el. Press MENU b utton to e xit the setup screen. 4 • The password is set to "7890" by default. • Once the setup is complete, you will be taken to the previous screen.
ENG 46 SETUP 2 1 3 In Stop mode, press MENU b utton. Press Cursor b utton to mov e to ‘ Setup ’ and then press ENTER b utton. Press Cursor b utton to mov e to ‘ LOGO ’ and then press ENTER b utton. T o select one of the 3 wallpaper settings y ou've made 5 4 Press MENU b utton to e xit the setup screen.
ENG 48 SETUP 2 1 4 3 In Stop mode, press MENU b utton. Press Cursor b utton to mov e to ‘ A udio ’ and then press ENTER b utton. In the Speak er Setup , press the ENTER b utton again. Press Cursor , , , b uttons to mov e to the desired speak er and then press ENTER b utton.
49 Setting up the Speaker Dela y Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
51 Press RETURN b utton to retur n to the pre vious lev el. Press MENU b utton to e xit the setup screen. 2 1 4 3 In Stop mode, press MENU b utton. Press Cursor b utton to mov e to ‘ A udio ’ and then press ENTER b utton. Press Cursor b utton to mov e to ‘ SOUND EDIT ’ and then press ENTER b utton.
GB 54 SETUP 53 12 In Stop mode, press MENU b utton. Press Cursor b utton to mov e to ‘ A udio ’ and then press ENTER b utton. • When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller.
ENG 56 12 • You can select between 0 and 7. • This sets the width of the center image. The higher the setting, the less sound comes from the center speaker. • You can select between 0 and 6. • Incrementally adjusts the sound field (DSP)from the front or rear.
ENG 58 T o tune in to a preset station, press on the remote control to select a channel. • Refer to Step 2 on page 57 to automatically or manually tune in to a station. 2 1 • “ 01 ” flashes in the display. 3 Example: Presetting FM 89.1 in the memory Press TUNING/CH to select "89.
ENG 60 • Each time the button is pressed, the brightness changes as follows: DARK ➞ BRIGHT . Adjusting Displa y Brightness You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing. Press DIMMER b utton.
ENG Operating a TV with the Remote Contr ol • The remote control may not work on some brands of TVs. Also, depending on your brand of TV, some operations may not be possible. • If you do not set the remote control with the code for your brand of TV, the remote control will work on a Samsung TV by default.
ENG 64 • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. • Disc is r otating but no picture is pr oduced. • Picture quality is poor and picture is shaking.
ENG 66 MISCELLANEOUS Code Language Code Language Code Language Code Language 1027 Afar 1181 Frisian 1334 Latvian, Lettish 1506 Slovenian 1028 Abkhazian 1183 Irish 1345 Malagasy 1507 Samoan 1032 Afrika.
S P E A K E R Subwoofer speaker 4 Ω 35Hz~140Hz 85dB/W/M 100W 200W 5.71 x 12.6 x 13.39 inches 7.9 lbs Front/Center/Rear speaker 4 Ω x 5 145Hz~20KHz 85dB/W/M 100W 200W 3.
An important point after buying a device Samsung HT-P29 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung HT-P29 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung HT-P29 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung HT-P29 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung HT-P29 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung HT-P29, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung HT-P29.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung HT-P29. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung HT-P29 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
