Instruction/ maintenance manual of the product HT-DS900 Samsung
Go to page of 78
DIGIT AL HOME CINEMA SYSTEM HT -DS700 HT -DS900 HT -DS970 TUNING/CH TV DVD RECEIVER OPEN/CLOSE DVD TUNER AUX EZ VIEW NTSC/PAL SLOW SUB TITLE STEP PL II RETURN MENU IN FO MUTE MODE ENTER SOUND EDIT TEST TONE SLEEP LOGO DIGEST SLIDE MODE CANCEL ZOOM REMAIN TUNER MEMORY P.
1 Safety W arnings Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIA TION WHEN OPEN AND INTERLOCKS DEFEA TED, A VOID EXPO- SURE TO BEAM.
2 Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally , on a suitable base (furniture), with enough space around it for ventilation (3~4inches).
Features 3 Multi-Disc Playback & AM/FM T uner The HT -DS700/DS900/DS970 combines the convenience of multi-disc playback capabil- ity , including DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, DivX, CD-R/R W , and DVD- R/RW , with a sophisticated AM/FM tuner , all in a single player .
4 PREP ARA TION Contents PREP ARA TION Safety W arnings ..................................................................................................................................................................1 Precautions ...................
DVD (Digital V ersatile Disc) of fers fantastic audio and video, thanks to Dolby Digital sur- round sound and MPEG-2 video compression technology . Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall.
CD-R Discs • Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs may not be playable. • Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable. • If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
DSP P.SCAN TITLE GRP CHAP PRGM TRK ST TUNED kHz MHz PBC LINEAR PCM DVD AUDIO MPEG L C R SW RR RL LS S RS RDS RT REP.1 TA DOLBY DIGIT AL indicator P .SCAN indicator PRO LOGIC indicator TITLE indicator .
—Rear Panel— Audio Cable Video Cable Remote Control FM Antenna AM Antenna User's Manual FM Antenna Connector 5.1 Channel Speaker Output T erminals Video Output Connector Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector .
VOLUME PL II MODE button VOLUME button MENU button TV , DVD POWER button OPEN/CLOSE button STEP button DSP/EQ button EZ VIEW , NTSC/P AL button RETURN button Number(0~9) buttons RDS Selection button S.
T o open the remote control cover , push the top of the cover , then slide downward. 10 Insert Remote Batteries The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30 ° from the remote control sensor .
RS LS C L SW R Rear Speakers • Place these speakers behind your listening position. • If there isn't enough room, place these speakers to face each other . • Place them about 60 to 90cm (2 to 3feet) above your ear , facing slightly downward.
• Make sure the colors of the speaker terminals match the colors of the connecting jacks. • Insert the black wire into the black ( – ) terminal and the gray wire into the gray (+) terminal. • Make sure the polarities (+ and – ) are correct. Black Press down the terminal tab on the back of the speaker .
Connecting the V ideo Out to TV 13 METHOD 2 Scart ............... Better Quality If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the A V OUT jack on the back panel of the system to the SCAR T IN jack on your televi- sion.
CONNECTIONS P .SCAN (Progressive Scan) Function Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of infor- mation (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.
15 Press AUX on the remote control to select ‘ DIGIT AL IN ’ . • Each time the button is pressed, the selection changes as follows: DIGIT AL IN › AUX 1 › AUX 2 . • Y ou can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD › DIGIT AL IN › AUX1 › AUX2 › FM › AM .
Press AUX on the remote control to select AUX 1 or AUX 2. • Each time the button is pressed, the selection changes as follows: DIGIT AL IN › AUX 1 › AUX 2 . • Y ou can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD › DIGIT AL IN › AUX1 › AUX2 › FM › AM .
17 Connecting the FM and AM Antennas Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. FM Antenna (supplied) AM Loop Antenna (supplied) If AM reception is poor , connect an outdoor AM antenna(not supplied). 1p~40p(DS700)-GB 2004.
18 CONNECTIONS The cooling fan dissipates the heat generated inside the unit so that the unit can be operated normally . The cooling fan is activated automatically to supply cool air to the unit. Please observe the following cautions for your safety .
19 Before Using Y our DVD Player Y our DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly . Read the instructions carefully before using. 1 Plug the power cord into the AC power supply .
20 • Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately . • Y ou can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing. • Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.
Disc Playback • Depending on the content of the disc, the initial screen may appear different. • Depending on the recording mode, some MP3-CDs cannot be played. • T able of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.
• In this manual, the instructions marked with "DVD ( )" are applicable to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs. Where a particular DVD type is mentioned, it is indicated separately . • Depending on the content of the disc, the initial screen may appear different.
Checking the Remaining T ime Each time the REMAIN button is pressed Press the REMAIN button. • For checking the total and remaining time of a title or chapter being played.
24 CONNECTIONS • Depending on the recording mode, some MP3-CDs may not play . • T able of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. Note MP3-CD Playback Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
JPEG File Playback Images captured with a digital camera or camcorder , or JPEG files on a PC can be stored on a CD and then played back with this DVD player . Slide Mode JPEG 25 Place the JPEG disc on the disc tray . • Each time the button is pressed, the slide moves backward or forward.
Rotate/Flip Function button: Flip V ertically button: Flip Horizontally button: Rotate 90 ° Counterclockwise button: Rotate 90 ° Clockwise Digest Function 2 Press Cursor , , , buttons to select the desired image and then press ENTER button. 1 Press DIGEST button during playback.
Fast playback DivX Playback Skip Forward/Back During playback, press the button. • Go to the next file whenever you press button, if there are over 2 files in the disk. • Go to the previous file whenever you press button, if there are over 2 files in the disk.
5 Minute Skip function 28 • When playing the DivX disk, you can play the file with extension of A VI only . • Among the available DivX audio formats, DTS Audio is not supported. • WMV V8 is not supported for WMV files. • When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
29 Displaying Disc Information Y ou can view disc playback information on the TV screen. Press INFO button. • Each time the button is pressed, the display changes as follows: DVD Display disappears .
30 OPERA TION Fast/Slow Playback Fast Playback DVD VCD CD MP3 Press and hold . • Each time the button is held down during playback, the playback speed changes as follows: Press SLOW button.
Skipping Scenes/Songs DVD VCD MP3 DVD DVD VCD MP3 Briefly press . • Each time the button is pressed briefly during playback, the previous or next chapter , track, or directory (file) will be played. • During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds.
Repeat Playback Repeat playback allows you to repeatedly play a chapter , title, track (song), or directory (MP3 file). Press REPEA T button. • Each time the button is pressed during playback, the repeat playback mode changes as follows: DVD VCD CD MP3 JPEG • Repeat playback operation is not possible with version 2.
A-B Repeat Playback • The A-B Repeat function will not work on an MP3 or JPEG disc. 2 Press Cursor button to move to REPEA T PLA YBACK ( ) display . • For a VCD or CD, press INFO button once. 1 Press INFO button twice. A - A - ? REPEA T : A — A - B REPEA T : A — B • The specified segment will be played repeatedly .
34 OPERA TION Angle Function This function allows you to view the same scene in different angles. DVD 2 Press Cursor button to move to ANGLE ( ) display . 1 Press INFO button. 1/3 • Each time the button is pressed, the angle changes as follows: 3 Press Cursor , or numeric buttons to select the desired angle.
Zoom Function This function allows you to enlarge a particular area of the displayed image. Zoom (Screen Enlarge) Function DVD VCD Aspect Ratio DVD 2 Press Cursor , , , buttons to move to the area you want to enlarge. 1 Press ZOOM but- ton. • Each time the button is pressed, the zoom level changes as follows: 3 Press ENTER but- ton.
36 OPERA TION Bonus Group / Navigating Pages Some DVD-Audio discs have an extra ‘ bonus ’ group that requires a 4-digit key number to access. See the disc packaging for details and the-key number . Bonus Group When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically .
37 Selecting Audio/Subtitle Language • Depending on the number of languages on a DVD disc, a different audio language (ENG- LISH, SP ANISH, FRENCH, etc.) is selected each time the button is pressed. 2 Press Cursor , buttons or numeric but- tons to select the desired audio language.
38 Moving Directly to a Scene/Song • The selected file will be played. • An MP3 or JPEG disc cannot be moved from the disc information screen. • When playing an MP3 or JPEG disc, you cannot use , to move a folder . T o move a folder , press (Stop) and then press , .
Using Disc Menu Y ou can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. DVD 39 2 • When playing a VCD (version 2.
Using the T itle Menu For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, this function may either not work at all or may work differently . 2 Press Cursor , button to move to ‘ T itle Menu ’ . DVD 1 In Stop mode, press MENU but- ton.
41 Setting the Language OSD language is set to English by default. 2 1 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen.
42 * If the language you selected is not recorded on the disc, menu language will not change even if you set it to your desired language. Selecting the OSD Language Selecting the Audio Language (recorded on the disc) 4 • Once the setup is complete, if the language was set to English, OSD will be displayed in English.
43 Setting TV Screen type 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘ Setup ’ and then press ENTER button. • Once the setup is complete, you will be taken to the previous screen. Press Cursor button to move to ‘ TV DISPLA Y ’ and then press ENTER button.
44 SETUP The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen size, you should adjust the aspect ratio to fit your TV or monitor.
45 Setting Parental Controls (Rating Level) Use this to restrict playback of adult or violent DVDs you do not want children to view. 2 1 In Stop mode, press MENU button. Press Cursor button to move to ‘ Setup ’ and then press ENTER button. 41P~76P(DS700)-GB 2004.
46 • This function works only if a DVD disc contains the rating level information. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 4 • The password is set to "7890" by default. • Once the setup is complete, you will be taken to the previous screen.
2 1 Press MENU button in ST OP mode. Press Cursor button to move to ‘ Setup ’ and then press ENTER button. 47 Setting the Password You can set the password for the Parental (rating level) setting. • The password is set to "7890" by default.
4 • Enter the old password, a new password, and confirm new password. • The setting is complete. 3 5 Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 48 Press Cursor button to move to ‘ P ASSWORD ’ and then press ENTER button.
49 Setting the W allpaper While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper. DVD VCD JPEG • “ COPY LOGO DATA ” will be displayed on the TV screen. • The selected wallpaper will be displayed. • You can repeat Steps 1 and 2 to set up to 3 wallpapers.
50 SETUP 2 1 3 In Stop mode, press MENU button. Press Cursor button to move to ‘ Setup ’ and then press ENTER button. Press Cursor button to move to ‘ LOGO ’ and then press ENTER button. T o Change the W allpaper 5 4 Press MENU button to exit the setup screen.
2 1 Press the MENU button while the disc tray is open. Press Cursor button to move to ‘ Setup ’ and then press ENTER button. 4 3 Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 51 Press Cursor button to move to ‘ DVD TYPE ’ and then press ENTER button.
52 SETUP A V SYNC Setup Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. • 'Audio' menu appears. 2 1 • Setup menu appears. • AV-SYNC screen appears. 3 Press Cursor , buttons to move to ‘ Audio ’ and then press ENTER button.
2 1 4 3 Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. In Stop mode, press MENU button. Press Cursor button to move to ‘ Audio ’ and then press ENTER button.
Setting the T est T one Press the Test Tone to check the speaker connections and to adjust the speaker levels. L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) Press RETURN button to return to the previous level.
Setting the Delay T ime If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.
56 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAKER placement It is desirable to place all speakers within this circle. Ideal SURROUND SPEAKER placement SETUP • You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC.
57 Setting the Audio Quality You can adjust the balance and level for each speaker. 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘ Audio ’ and then press ENTER button. Press Cursor button to move to ‘ SOUND EDIT ’ and then press ENTER button.
Adjusting Front/Rear Speaker Balance • You can select between 00 and – 06 and OFF. • The volume decreases as you move closer to – 6. Adjusting Center/Rear/Subwoofer Speaker Level • The volume level can be adjusted in steps from +6dB to – 6dB.
59 Setting the DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 12 In Stop mode, press MENU button. Press Cursor button to move to ‘ Audio ’ and then press ENTER button.
60 Sound Field (DSP)/EQ Function DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments. EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music. • "DSP" appears on the display panel.
61 Dolby Pro Logic II Mode You can select the desired Dolby Pro Logic II audio mode. Press PL II MODE button. PRO LOGIC II • MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance. • CINEMA: Adds realism to the movie soundtrack.
62 Dolby Pro Logic II Effect This function works only in Dolby Pro Logic MUSIC mode. 12 • You can select between 0 and 7. • You can select between 0 and 6. 34 • PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.
63 Listening to Radio You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation. 2 1 • The selection toggles back and forth between "FM › AM" each time the TUNER(BAND) button is pressed.
64 Presetting Stations T o tune in to a preset station, press on the remote control to select a channel. • Refer to Step 2 on page 63 to automatically or manually tune in to a station. 2 1 • Each time the button is pressed, the band switches between "FM › AM".
About RDS broadcasting • RDS is not available for AM broadcasts. • RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak. • If searching finishes at once, “ PS ” ,and “ RT ” will not appear on the display.
PTY (Program T ype) indication and PTY -SEARCH function 66 T o search for a program using the PTY codes Before you start, remember... • The PTY Search is only applicable to preset stations. • To stop searching any time during the process, press PTY SEARCH while searching.
67 Convenient Functions • The remaining time before the DVD player will shut itself off is displayed. • Pressing the button again changes the sleep time from what you have set earlier. T o confirm the sleep timer setting, press SLEEP button. • "SLEEP" will be displayed.
68 MISCELLANEOUS • Each time the button is press, the brightness changes as follows: SLIGHTLY DARK > DARK > BRIGHT . TITLE CHAP PRGM RDS RT ST TUNED kHz MHz Adjusting Display Brightness You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
69 Operating a TV with the Remote Control • The remote control may not work on some brands of TVs. Also some operations may not be possible depending on your brand of TV. • If you do not set the remote control with the code for your brand of TV, the remote control will work on a Samsung TV by default.
70 MISCELLANEOUS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 SAMSUNG ANAM DAEWOO LG HITACHI JVC SHARP SONY TOSHIBA SANYO MITSUBISHI MATSUSHITA TELEFUNKEN RCA PANASONIC SABA PHILIPS GRUNDIG ZENITH MIVAL NOBLEX EMERSON MAGNAVOX LOEWE THOMSON NORDMENDE LOEWE OPTA BLAUPUNKT SIEMENS TV Brand Code List No.
71 Before Calling for Service Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
72 • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking.
73 Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean Protection jacket.
74 Specifications MISCELLANEOUS Power Consumption Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range Usable Sensitivity S/N Ratio Distortion Usable Sensitivity S/N Rati.
75 Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights S P E A K E R 5.1ch speaker system Front/Center/Rear speaker 4 Ω x 5 150Hz~20KHz 85d.
76 Notes on T erminology Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left , from the right , etc.). With such discs, the Angle button can be used to change the angle of view for specific scenes.
REV :02 AH68-01495B THIS APPLIANCE IS MANUF ACTURED BY : A V SYNC NA 1p~40p(DS700)-GB 2004.9.16 1:53 PM Page 2.
An important point after buying a device Samsung HT-DS900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung HT-DS900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung HT-DS900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung HT-DS900 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung HT-DS900 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung HT-DS900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung HT-DS900.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung HT-DS900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung HT-DS900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
