Instruction/ maintenance manual of the product VOH560PKG Audiovox
Go to page of 18
VOH560PKG Drop Down V ideo Monitor and V ideo Cassette Player System Installation and Operation Manual ELE CT R O NICS CO RP . ®.
Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver's seat, or that is visible directly or indirectly to the operator of the motor vehicle.
MATERIALS INCLUDED IN THIS PACKAGE: 1 ) VOH560 Video Monitor with out TV T uner (1 pc) 2) VCP Harness (P/N 1 12C3035) (1 pc) 3) 12 Pin Power / Signal harness (P/N 1 12B2821) (1 pc) 4) 2 Pin Power Wire.
GENERAL INSTALLATION APPROACH: 1) Decide upon system configuration and options that will be installed (i.e.: what components, VCP , RF Modulator/external amp, remote headphone, 2 nd VCP , etc.). 2) Review all manuals to become familiar with electrical requirements and hook ups.
VEHICLE PREPARATION: 1) Locate a constant power source (+12v at all times) and an accessory power source (+12v when key is in the acc. and run positions, and 0v when key is off).
MINI CONSOLE INSTALLATION: This page only covers special installation considerations for the mini console installation. If the video monitor is to be installed with a custom full sized overhead console, refer to page 3.
Roof Roof support Headliner 5"x9"x3/4" Plywood Block or Optional VOHBKT (4) #8x1" self drilling screws (not supplied) Mini-Console Video unit (4) #8 Flat washers (not supplied) (4).
1) Make the connections to the vehicle for the 12 pin wiring harness. 2) Remove screws on PCB Cover. Open the cover to gain access to Mini-Din Connector on main PCB.
-7- Red / black - Lamp on Black / red - Lamp common Purple / brown - Lamp Auto T o 12 pin connector on Monitor To constant +12vdc To constant +12vdc Factory Door ajar switch or Body Control computer F.
T roubleshooting: Symptom: No power at Video Monitor Power but no video or sound Picture, but no sound No Infrared remote functions for VCP (or other compo- nents) Remedy: -Verify +12 VDC on Red wire at 2 pin Power Harness behind video moni- tor.
-9- 1 2 3A 8 10 9 3B 7 4 5 6 Front Panel 1. Infrared T ransmitter – Used to transmit audio to wireless headphones. 2. Power Button – (Bright red when system is On, dim when OFF).
1. Dust Cover – Protects VCP from dust and abuse access. 2. Power Button – (Bright red when system is On, dim when Off). 3. Stop / Eject Button – Used to stop the tape, and press it once more to eject the tape.
REMOTE CONTROL OPERA TION BA TTER Y INST ALLA TION Before attempting to operate your Remote Control, install the batteries as described below . 1) T urn the Remote Control face down. Press down on the ridged area of the battery cover and slide it off.
Remote Controlled VCP Functions 5. REPL Y BUTTON Pressing this button will rewind tape and immediately begin playback when the tape is fully rewound. 6. “REW” REWIND BUTTON If this button is pushed while the tape is stopped, the tape will rewind. If this button is pushed while the tape is playing, the VCP will go into rewind search mode.
Remote Sensor The VOH560 incorporates an infrared sensor which relays signals from the remote control to allow the VOH560 and VCP to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as an Audiovox DVD.
Wired FM Modulator Y our video system may be equipped with an RF modulator , that allows you to listen to the VOH560’s audio signal by tuning your vehicle’s radio to the selected frequency , (88.7 or 89.1 - check with your installer) and turning on the remote mounted RF modulator switch.
W arnings ✦ Do not use any solvents or cleaning materials when cleaning the video system. ✦ Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty . ✦ Lock the LCD screen in the fully closed position when not in use.
© Copyright 2001 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 1 1788 128-6065 WWW .audiovox.com For Custom er Ser vi ce Vi si t O ur W ebsi te At Product I nf or m at i on, Ph ot os, F A.
An important point after buying a device Audiovox VOH560PKG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox VOH560PKG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox VOH560PKG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox VOH560PKG you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox VOH560PKG will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox VOH560PKG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox VOH560PKG.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox VOH560PKG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox VOH560PKG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
