Instruction/ maintenance manual of the product Video VDS102T Audiovox
Go to page of 12
® Installation Guide VDS102T DROP -DOWN VIDEO MONT OR ON OFF AUTO.
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation.
~1~ MA TERIALS INCLUDED IN THIS P ACKAGE: 1) Over Head Docking Station (P/N 136-3955) – (1 pc) 2) Lamp Harness (P/N 1 12B31 10) – (1 pc) 3) 2 Pin Power Wire Harness with choke (P/ N 1 12B3143) –.
~2~ 12 3 5 9 11 10 6 7 4 8 13 14 12 1. Infrared Sensor 2. Three position Dome Light Switch 3. Dome Lights – 4. Channel ( ) Button – 6. Auto Program Button – – Allows the remote control to operate the VDS102T and to control the shuttle when docked.
~3~ GENERAL INST ALLA TION APPROACH: 1) Decide upon system configuration and options that will be installed (i.e.: what components, VCP , Video Game, external amp, wireless headphones, etc.). 2) Review all manuals to become familiar with electrical requirements and hook ups.
~4~ VEHICLE PREP ARA TION: 1) Locate an accessory power source (+12v when key is in the ACC. and run positions, and 0v when key is off), and also a good ground generally , these wires can be found at the ignition switch or fuse-box.
~5~ TRIM RING INST ALLA TION: This page only covers special installation considerations for the trim ring installation. If the docking station is to be installed in a vehicle with the trim ring, it may need to be trimmed to fit the contour of the vehicle headliner .
~6~ ~6~ MOUNTING THE TRIM RING VDS102 Roof Roof Support Headliner (4) Self-T apping Screws T rim Ring Docking Station () 4 M5 Nuts Mounting Bracket NOTE: Use care when screwing the bracket to the roof.
~7~ 1) Make the connections to the vehicle for the 12 pin wiring harness. 2) Connect power harness to vehicle’ s electrical system by tapping into an accessory hot line and a good ground. 3) V erify all functions of the System before final mounting of the finished assembly .
~8~ CONNECTING THE DOME LIGHTS The dome lights in the video monitor require three connections to the vehicle's wiring. There are two common types of dome light circuits used, positive or negative switched. Positive systems supply voltage to the interior lights to turn them on, negative switched systems apply ground to illuminate the bulbs.
~9~ Negative Switched Dome Lighting Red / black - Lamp on T o 12 pin connector To constant To constant Black / red - Lamp common Purple / brown - Lamp Auto Factory Door ajar switch or Body Control com.
© Copyright 200 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 1 1788 5 128-7347 WWW .audiovox.com For Customer Service Visit Our Website At Product Information, Photos, F AQ’s Owner’s.
An important point after buying a device Audiovox Video VDS102T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox Video VDS102T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox Video VDS102T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox Video VDS102T you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox Video VDS102T will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox Video VDS102T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox Video VDS102T.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox Video VDS102T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox Video VDS102T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
