Instruction/ maintenance manual of the product Bixolon SRP-352plusA&C Samsung
Go to page of 22
User ’ s Manual SRP-350/352plusA&C Thermal Printer Rev . 1.06 http://www .samsungminiprinters.com.
Rev . 1.06 - 2 - SRP-350/352plusA&C ■ Safety Precautions In using the present appliance, please keep t he following safety regulations in order to prevent any hazard or material damage. W ARNING Violating following instructions c an cause serious injury or death.
Rev . 1.06 - 3 - SRP-350/352plusA&C CAUTION Violating f ollow ing inst ructions can cause sligh t wound or dam age the appl iance. Do not use the printe r when it is ou t of order . This can cause a fire or an electro cu tion. • Switch off and unplug the printer before calling your dealer .
Rev . 1.06 - 4 - SRP-350/352plusA&C ■ W arning - U.S.A This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful interfer ence when the equipment is operated in a commercial environment.
Rev . 1.06 - 5 - SRP-350/352plusA&C ■ Introduction The SRP-350/352plus Roll Printer are designed fo r use with electronic instruments such as system ECR, POS, banki ng equipment, computer peripheral equipment, etc. The main features of the printer are as follows: 1.
Rev . 1.06 - 6 - SRP-350/352plusA&C ■ T able of Content s 1. Setting Up the Printer ................................................................................................... 7 1-1 Unpac king ............................................
Rev . 1.06 - 7 - SRP-350/352plusA&C 1. Setting Up the Printer 1-1 Unpacking Y our printer box should include these items. If any items are damaged or missing, pleas e contact your dealer for assist ance.
Rev . 1.06 - 8 - SRP-350/352plusA&C 1-2 Connecting the Cables Y ou can connect up the three cables to the printer . They all connect to the connector panel on the back of the printer , which is shown below: ※ NOTE Before connecting any of the cables, make sure that both the printer and the host are turned off.
Rev . 1.06 - 9 - SRP-350/352plusA&C 1-2-2 Parallel Interface (IEEE1284) Pin No. Source Compatibility Mode Nibble Mode Byte Mode 1 Host nStrobe HostClk HostClk 2 Host / Printer Data 0 (LSB) - Data .
Rev . 1.06 - 10 - SRP-350/352plusA&C 1-2-3 USB2.0 Interface Pin No. Signal Name Assignment (Color) Function Shell Shield Drain Wire Frame Ground 1 VBUS Red Host Power 2 D- White Data Line(D-) 3 D+ Green Data Line(D+) 4 GND Black Signal Ground 1-3 Connecting the Drawer ※ W ARNING Use a drawer that matches the printer specification.
Rev . 1.06 - 1 1 - SRP-350/352plusA&C 1-4 Setting the Dip Switches 1-4-1 Serial Interface (RS-232C) • DIP Switch 1 SW Function ON OFF Default 1-1 Auto Line Feed Enable Disable OFF 1-2 Handshakin.
Rev . 1.06 - 12 - SRP-350/352plusA&C • T able 1 – Baud rate (bps) Selection T ransmission S peed 1-6 1-7 1-8 Default 2400 ON OFF OFF 4800 ON OFF ON 9600 OFF ON OFF 19200 OFF OFF OFF 38400 OFF .
Rev . 1.06 - 13 - SRP-350/352plusA&C 1-5 Setting the Memory Switches This printer has “Memory Switch” set which is software switches. Memory Switch set has “MSW1”, “MSW2”, “MSW8”, “MSW9” “Customize value”, “Seria l communication condition”.
Rev . 1.06 - 14 - SRP-350/352plusA&C MSW2-8 MSW2-7 MSW2-6 MSW2-5 MSW2-4 MSW2-3 Character T able OFF OFF OFF OFF OFF OFF Page 0 437 (USA, S ta ndard Europe) OFF OFF OFF OFF ON OFF Page 1 Katakana O.
Rev . 1.06 - 15 - SRP-350/352plusA&C 1-6 Installing or Replacing the Paper Roll ※ NOTE Be sure to use paper rolls that meet the spec ifications. Do not use p aper rolls that have the paper glued to the core because the pr inter cannot detect the p aper end correctly .
Rev . 1.06 - 16 - SRP-350/352plusA&C 1-6-5 Be sure to note the correct direct ion that the paper comes of f the roll. 1-6-6 Pull out a small amount of paper , as shown. Then close the cover . ※ NOTE When closing the cover , press the center of printer cover firmly to prevent paper miss-loading.
Rev . 1.06 - 17 - SRP-350/352plusA&C 1-7 Adjustments and Settings The SRP-350/352plus is set up at the factory to be appropriate fo r almost all users.
Rev . 1.06 - 18 - SRP-350/352plusA&C 1-9 Connecting the computer Y ou need an appropriate interface cable. 1-9-1 Plug the cable connector securely in to the printer ’s interface connector . 1-9-2 T ighten the screws on both si des of the cable connector .
Rev . 1.06 - 19 - SRP-350/352plusA&C 2. Self test The self-test checks whether the printer has any problems. If the printe r does not function properly , contact your dealer . The self-test checks the following; 2-1 Make sure paper roll has been inst alled properly .
Rev . 1.06 - 20 - SRP-350/352plusA&C 3. Hexadecimal Dumping This feature allows experienced users to see exactly what data is coming to the printer .
Rev . 1.06 - 21 - SRP-350/352plusA&C 4. Specification Item Details Printing Method Thermal Line Printing Dot Density SRP-350plus: 180 X 180 dpi (7dot s/mm) SRP-352plus: 203 X 203 dpi (8dot s/mm) P.
Rev . 1.06 - 22 - SRP-350/352plusA&C 5. Appendix 5-1 Cleaning Printer Paper dust inside the printer may lower the print quality . In this case clean the printer as follows. 5-1-1 Open the printer cover and remove the paper if exist s. 5-1-2 Clean the print head with a cott on swab moistened with alcohol solvent.
An important point after buying a device Samsung Bixolon SRP-352plusA&C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung Bixolon SRP-352plusA&C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung Bixolon SRP-352plusA&C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung Bixolon SRP-352plusA&C you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung Bixolon SRP-352plusA&C will certainly help you make a decision on the purchase.
If you already are a holder of Samsung Bixolon SRP-352plusA&C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung Bixolon SRP-352plusA&C.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung Bixolon SRP-352plusA&C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung Bixolon SRP-352plusA&C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
