Instruction/ maintenance manual of the product PS-2655 Audiovox
Go to page of 10
INST ALLA TION/ OWNERS MANUAL 3.5”, 4”, 5-1/4”, 6.5” SPEAKERS.
M O DEL PS- 2351 PS- 2401 PS- 2525 PS- 2652 PS- 2655 N o m i n a l D ia . 3 -1 /2 " 4 " 5 -1 /4 " 6 -1 /2 " 6 -1 /2 " Descr ipt ion 2- Way 2-Way 2-Way 2-Way 2- Way Impedance 4 Ohms 4 Oh ms 4 Ohm s 4 O h ms 4 Ohms Freq.
PRE-INST ALLA TION TIPS Before beginning your installation, read the following tips on proper placement of speakers and how to obtain the best sound from the speakers you have selected. No. 1: Always try to have the speakers aimed at the listener . Never install speakers in a manner that would direct sound toward the floor of the car .
-4- INST ALLA TION INSTRUCTIONS CAUTION: Do not mount the speakers in the following locations: - Where the door window glass comes in contact with the speaker . - Where the window crank handles or gear assemblies come in contact with the speaker when rotated.
Removing the Door Panel 1. This opening would have to be enlarged per dotted line 2. Possible speaker opening 3. Remove paper liner 4. Padded door panel 5. Window crank Selecting Speaker Location After removing the door panel, you are ready to select a location for the speaker .
Selecting the Speaker Location 1. This is a good speaker location , but to use it, you’ll have to enlarge the existing hole 2. Check for free window crank movement 3.
Piercing Speaker Mounting Holes 1. Opening 2. Speaker 3. Pierce the speaker mounting holes Using an Existing Hole 1. Speaker 2. Drill 3. Drill the required speaker mounting holes -7- Enlarging or Cutting a New Hole 1. Enlarge or cut new hole per template 2.
Routing Speaker W ires 1. Door Frame 2. Kick Panel 3. Connect speaker wires to speakers 4. Route wires to stereo 5. Drill 1/4” hole or use existing grommets 6. Door (open) Securing Speaker and Grille 1. Speaker 2. Grille 3. Speaker mounting screws 4.
Speaker Mounting Details The following illustrations define the requirements for mounting the speaker on the near and far sides of the mounting surface or inde- pendent mounting board.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s) or markings.
An important point after buying a device Audiovox PS-2655 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PS-2655 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PS-2655 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PS-2655 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PS-2655 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PS-2655, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PS-2655.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PS-2655. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PS-2655 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
