Instruction/ maintenance manual of the product PRO 9544FT Audiovox
Go to page of 8
SELECT ABLE FEA TURES Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
Page 2 INST ALLA TION OF MAJOR COMPONENTS Control Module : Select a mounting location inside the passenger compartment ( up behind the dash ), and secure using the two screws provided. The control module can also be secured in place using cable ties. Do not mount the control module in the engine compartment, as it is not waterproof.
Page 3 WIRING THE SYSTEM Large 8 Pin Edge Connector : Red Fused Wire : + 12 VDC Constant Battery Source This wire controls the sensitivity of the voltage sensing circuit, which detects the turning on of an interior light when a door is opened.
Orange Wire : 300 mA Ground Output When Armed - N. C. Starter Disable This wire is provided to control the starter cut relay . Connect the orange wire to terminal 86 of the relay . Connect relay terminal 85 to an ignition wire in the vehicle that is live when the key is in the on and crank positions, and off when the key is in the off position.
Page 5 Black w/ White T race Wire : 300 mA Horn Output The black w/ white trace wire is provided to beep the vehicle’s horn. This is a transistorized low current output, and should only be connected to the low current ground output from the vehicle’s horn switch.
Page 6 4 Wire Polarity Reversal and 5 Wire Alternating 12 V olt Door Lock Control Circuits In these applications, the AS 9159 Door Lock Interface ( or equivalent 30 A automotive relays ) must be used. Refer to the AUDIOVOX Door Lock Wiring Supplement for proper connection to these types of circuits.
RED TO +12 VDC IGN./CRANK 87A 85 86 30 CUT (-) TO VEHICLE'S CHASSIS GROUND SIREN EXISTING +12 VOLT PARKING LIGHT WIRE BLACK +12 VDC BATTERY Connect to a +12 Volt Battery Source.
PRO-9544FT CONTROL MODULE BLACK + DOOR LOCK OUTPUTS (+) Lock Pulse (-) Unlock Pulse (-) Lock Pulse (+) Unlock Pulse GREEN RED LT. BLUE L.E.D. LT. GREEN HEADLIGHT OUTPUT 30 Second Ground Output Dur.
An important point after buying a device Audiovox PRO 9544FT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO 9544FT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO 9544FT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO 9544FT you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO 9544FT will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO 9544FT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO 9544FT.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO 9544FT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO 9544FT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
