Instruction/ maintenance manual of the product PRO 9232S Audiovox
Go to page of 8
Congratulations on your purchase of the PRO 9232S automotive Keyless Entry Upgrade Alarm System. The PRO 9232S is a state -of -the-art auto security system that is designed to automatically arm and disarm when it receives a command from your existing Factory Keyless Entry Transmitter.
3. In 30 seconds, you will hear a single short chip from the siren, and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. At this time, the red dash mounted LED will begin to flash slowly, providing a visual indication that the system is fully armed.
DISARMING THE SYSTEM: 1. As you approach the vehicle, press and release the unlock button on the keychain transmitter. 2. The siren and or horn will beep two times, the parking lamps will flash two times, and the red dash mounted LED will turn off, indicating that the system is DISARMED.
USING THE VALET SWITCH: The valet switch allows you to temporarily bypass all alarm functions, eliminat- ing the need to hand your transmitter to parking attendants or garage mechan- ics. When the system is in valet mode, all alarm functions are bypassed, how- ever the remote panic feature and remote door locks will remain operational.
4. Within 10 seconds of turning the ignition switch on, begin to enter units digit of override code. (In this example the code is 1 1, so press and release the V alet/Override pushbutton one time). 5. Within 5 seconds after the last units digit is entered, turn the ignition switch off, then on, and start your vehicle.
pattern reports the previously stored code, the new code was not entered correctly . Please repeat steps 1 through 7 above considering the following. NOTE: Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero), or no digit entered in any place, units or tenths.
NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last success fully stored code.
Your System Has These Features Activated: PRO 9232S SYSTEM FUNCTIONS A T A GLANCE Starter Disable When Armed Passive Arming Instant Trigger Remote Car Starter Remote Window Open G G G G G G G G G G Form No. 128-6021 Audiovox Corp. 150 Marcus Blvd. Hauppauge, N.
An important point after buying a device Audiovox PRO 9232S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRO 9232S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRO 9232S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRO 9232S you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRO 9232S will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRO 9232S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRO 9232S.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRO 9232S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRO 9232S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
