Instruction/ maintenance manual of the product SXD5000 Samson
Go to page of 16
Owner's Manual SXD3000 - 900 W att Stereo Power Amplifier SXD5000 - 1,500 W att Stereo Power Amplifier SXD7000 - 2,000 W att Stereo Power Amplifier.
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. This apparatus shall not be exposed to dripping or splashing liquid and no object filled with liquid, such as a vase, should be placed on the apparatus.
3 SXD Series Power Amplifiers with DSP T able of C ontents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting Started with the SXD Power Amplifier . . . . . . . . . . . . . . . . . 6 Front Panel Callouts . . . .
4 The Samson SXD Series stereo power amplifiers have been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by professional front-of-house engineers and installers.
5 SXD Series Power Amplifiers with DSP • High power for performance and installation speaker configurations: SXD3000 2 x 300 W atts at 8Ω and 2 x 450 W atts at 4Ω SXD5000 2 x 400 W atts at 8Ω an.
6 Get ting Started with the SXD Po w er Amplier Setting up your SXD Series is a simple procedure which takes only a few minutes: Remove all packing materials (save them in case your units needs fut.
7 SXD Series Power Amplifiers with DSP Fr ont Panel C allouts Channel Level Controls T wo detent controls to precisely adjust the output level of each channel UP/DOWN/BACK Buttons Use these buttons t.
8 Exhaust Fan This variable-speed fan provides cool- ing to amplifier . Make sure that both the front and rear panels are kept free of all obstructions and that cool, fresh air is accessible at all times. Input Connectors Connect incoming signals to these electronical- ly balanced connectors, using either XLR or ¼” TRS (T ip/Ring/Sleeve) plugs.
9 SXD Series Power Amplifiers with DSP Get ting Started - DSP The SXD power amplifier features sophisticated high-performance DSP with control for the input and output routing, filter network, EQ, limiter , and time alignment delay . Follow these steps to navigate through the SXD internal DSP settings: 1.
10 Get ting Started - DSP EQ - In Manual mode there are three EQ filters per channel. The Low frequency adjustment can be set to a Low Frequency Shelf or to a parametric equalizer (PEQ) with Frequency , Q, and Gain adjustments. The mid band is a parametric equal- izer (PEQ) with Frequency , Q, and Gain adjustments.
11 SXD Series Power Amplifiers with DSP Pr esets The SXD DSP features four speaker presets that will allow you to quickly have your amplifier up and running with your speaker configuration. The presets only display the parameters that are essential to the speaker arrangement.
12 System Setup Ex amples T ypical SXD amplifier and speaker configurations for each Input and Output (I/O) setting in the DSP P R E S S T O R E S E T Mono A+B Dual: Subwoofer and Satellite Ch A lev.
13 SXD Series Power Amplifiers with DSP System Setup Ex amples P R E S S T O R E S E T Parallel A Dual: Subwoofer and Satellite Ch A level control adjusts Ch 1 Output Ch B level control adjusts Ch 2 .
14 Wiring Guide Unbalanced ¼” Connector Balanced TRS ¼” Connector XLR Balanced Connector Signal Ground Ground Sleeve (ground) Signal T ip (signal) +Signal (tip) +Signal (tip) -Signal (tip) Ring .
15 SXD Series Power Amplifiers with DSP Model SXD3000 SXD5000 SXD7000 Rated Output Power Stereo both channel driven 8 ohms 300W 500W 700W 4 ohms 450W 750W 1000W Signal to Noise Ratio (20Hz-20k) 100dB Distortion (SMPTE-IM) 0.
Samson T echnologies Corp. 45 Gilpin Avenue Hauppauge, New Y ork 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www .samsontech.com.
An important point after buying a device Samson SXD5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samson SXD5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samson SXD5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samson SXD5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Samson SXD5000 will certainly help you make a decision on the purchase.
If you already are a holder of Samson SXD5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samson SXD5000.
However, one of the most important roles played by the user manual is to help in solving problems with Samson SXD5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samson SXD5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
