Instruction/ maintenance manual of the product MXS3000 4600 MXS3500 5400 Samson
Go to page of 16
O WNER'S MANU AL MXS3000 4600 W att Stereo Power Amplifier MXS3500 5400 W att Stereo Power Amplifier.
.
Copyright 2014, Samson T echnologies Corp. v1.1 Samson T echnologies Corp. 45 Gilpin Ave Hauppauge, NY 11788 www .samsontech.com.
4 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. This apparatus shall not be exposed to dripping or splashing liquid and no object filled with liquid, such as a vase, should be placed on the apparatus.
5 MXS Series Power Amplifiers Important Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
6 C ontents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting Started with the MXS Power Amplifier . . . . . . . . . . . . . . . . 9 Front Callouts .
7 MXS Series Power Amplifiers The Samson MXS Series stereo power amplifiers have been designed to provide solid, clean output with low distortion and wide dynamic range, along with the dependability demanded by professional front-of-house engineers and installers.
8 F eatur es • Lightweight, high-power amplifier for performance and installation speaker configu- rations: MXS3000: 2 x 1850 W atts at 2Ω, 2 x 1550 W atts at 4Ω 4600 W atts at 4Ω, 3100 W atts at.
9 MXS Series Power Amplifiers Get ting Started with the MXS Pow er Amplier Setting up your MXS Series is a simple procedure which takes only a few minutes: Remove all packing materials (save them .
10 Fr ont Callouts 1 2 3 5 2 5 4 1. Power Switch - Use this switch to power the MXS amplifier on or off 2. Channel Level Controls - T wo detent controls to precisely adjust and the match the output level of each channel 3.
11 MXS Series Power Amplifiers R ear Callouts 1 3 4 4 6 7 5 1 2 5 6 1. Input Connectors - Connect incoming signals to these electronically balanced con- nectors, using either XLR or ¼” TRS (T ip/Ring/Sleeve) plugs. The amplifier accepts input levels of any strength but needs at least +4 dBu to achieve maximum power .
12 Bridge and Par allel Modes The MXS amplifiers provide a rear -panel switch that allows it to be used in either a Bridge or Parallel mode. When this switch is placed in the STEREO position, the MXS .
13 MXS Series Power Amplifiers System Setup Ex amples T ypical MXS amplifier and speaker configurations: Mono Input: Parallel Full Range Speakers Stereo Input: Stereo Full Range Speakers Mode Switch:.
14 Model MXS3000 MXS3500 Rated Output Power Stereo both channel driven 8 ohms 950W 1100W 4 ohms 1550W 1900W 2 ohms 1850W 2700W Bridged mono 8 ohms 3100W 3700W 4 ohms 4600W 5400W Signal to Noise Ratio (20Hz-20k) >103dB Distortion (SMPTE-IM) 0.
15 MXS Series Power Amplifiers Wiring Guide Unbalanced ¼” Connector Balanced TRS ¼” Connector XLR Balanced Connector Signal Ground Ground Sleeve (ground) Signal T ip (signal) +Signal (tip) +Sig.
Samson T echnologies Corp. 45 Gilpin Avenue Hauppauge, New Y ork 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www .samsontech.com.
An important point after buying a device Samson MXS3000 4600 MXS3500 5400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samson MXS3000 4600 MXS3500 5400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samson MXS3000 4600 MXS3500 5400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samson MXS3000 4600 MXS3500 5400 you will learn all the available features of the product, as well as information on its operation. The information that you get Samson MXS3000 4600 MXS3500 5400 will certainly help you make a decision on the purchase.
If you already are a holder of Samson MXS3000 4600 MXS3500 5400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samson MXS3000 4600 MXS3500 5400.
However, one of the most important roles played by the user manual is to help in solving problems with Samson MXS3000 4600 MXS3500 5400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samson MXS3000 4600 MXS3500 5400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
