Instruction/ maintenance manual of the product Prestige APS-45B Audiovox
Go to page of 8
Model APS-45B Installation Manual Keyless Entry System With Two Auxiliary Outputs Installation Instructions This Unit Is Intended For Installation In Vehicles With 12 Volt Negative Ground Electrical Systems Only.
The APS-45B Keyless Entry System is designed to provide a convenient electronic means to gain access to the vehicle by providing RF remote control over the vehicle's power door lock system. The unit also includes outputs to control the vehicle's dome lights, as well as exterior parking lights.
directly to the vehicle's positive parking light circuit. Once the wire is located, confirm that all the vehicle's parking lig hts will illuminate when +12VDC is connected to it. NOTE: Some vehicles, (mostly European) have isolated "left" and "right" side parking lights.
4 GREEN/BLACK Wire: Immediate, 300mA Duration of Transmit, Channel 4 OutputThe Green/Black wire supplies a 300mA switched output whenever Channel 4of the receiver is accessed. Pressing A combination of thetransmitter Lock/ UnLock buttons simultaneously will access Channel 4 and will remain active for as long as the transmitter button(s) is held.
5 the red wire to the wire that provides a low current positive signal from the factory door unlock switch to the factory door lock control relay . The green wire provides a positive pulse during locking, or the pulsed + 12 volt lock output.
6 Programmable Features: Features 1 Chirp 2 Chirp 3 Chirps Default Fi rs t Passive Arming Acti ve Ar ming Acti ve Ar ming Second Ig n ition D/ L O N Ignition D/L OFF Ignition D/L OFF Thi rd I gni tion.
7 Fourth Turn the valet switch on then off 1 chirp = chirps on 4 Flash pause Press transmitter Lock button to change 2 chirps = chirps off or Fifth Turn the valet swi tch on then off 2 chirps = active.
© 2001 Audiovox Electronics Corp. 128-6183 4 3.
An important point after buying a device Audiovox Prestige APS-45B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox Prestige APS-45B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox Prestige APS-45B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox Prestige APS-45B you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox Prestige APS-45B will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox Prestige APS-45B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox Prestige APS-45B.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox Prestige APS-45B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox Prestige APS-45B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
