Instruction/ maintenance manual of the product JVPM1W Salton
Go to page of 16
USE AND CARE GUIDE FOR MODEL JVPM1B, JVPM1W READ AND SA VE THESE INSTR UCTIONS P od Coffee Maker JVPM1B-609 8/18/04 4:40 PM Page 1.
2 IMPOR T ANT SAFEGU ARDS When using electrical appliances, basic saf ety precautions should alwa ys be f ollo wed, including the f ollo wing: • Read all instructions. • Do not touch hot surf aces. Use handles or knobs. • T o protect against fire, electric shock, do not place cord, plugs, or appliance in water or other liquid.
3 ADDITIONAL IMPOR T ANT SAFEGU ARDS W ARNING: This appliance generates heat and escaping steam during use. Use proper precautions to pre vent the risk of b ur ns, fires, or other injury to persons or damage to proper ty . • All users of this appliance must read and understand this Owner’ s Manual bef ore operating or cleaning this appliance .
4 POLARIZED PLUG: This appliance has a polarized plug, (one blade is wider than the other). T o reduce the risk of electr ic shock, this plug is intended to fit into a polarized outlet only one wa y . If the plug does not fit fully in the outlet, re verse the plug.
5 5 P ar ts Identification Lever W ater Diffuser Adjustable Brew Spout (P/N 31156B, 31156W) Drip T ray (P/N 31157) Lid W ater T ank (P/N 31160) Base Control Panel Over Flow T ray (P/N 31158B, 31158W) Pod Holder (P/N 31159B, 31159W) Pod Chamber (P/N 31163) Y our product ma y v ar y slightly from illustr ation.
6 Bef ore Using Y our P od Coffee Maker Become f amiliar with all par ts of the appliance. Keep y our Pod Coff ee Maker c lean Clean and descale your P od Coffee Mak er on a regular basis.
7 2 . Fill the Water T ank with fresh water up to the ‘Max’ line , and fit back into the Base (do wn and in) until it “snaps” into place, see Figure 4. 3. Lift Lid by pulling out on the Le v er . T op will pop up. Push back so Lid is in fully raised position, see Figure 5.
8 5. Make sure the mouth of the P od Chamber is inside the Adjustab le Brew Spout. Do not place a coffee pod in chamber . See Figure 6. 6. Place the P od Holder so it sits securely on top of the P od Chamber , see Figure 7.
9 9. Press the P ower Light/Indicator Button to turn power on, then simultaneously press the 5-Ounce Serving and 8-Ounce Ser ving Buttons, see Figure 8. The water from the W ater T ank will cycle through the coff ee maker . NO TE: If unit goes unused for 3 or more da ys, please repeat abov e process (steps 1-9).
10 6. Place one coff ee pod inside the P od Holder . Press lightly on the coff ee pod to mak e sure it sits e venly in the P od Holder . See Figures 9 and 10 f or correct pod inser tion. CA UTION: Use only pre-measured coffee pods in y our P od Coff ee Mak er .
11 Y ou ma y lea ve y our coffee mak er on if y ou intend to brew another cup of coff ee . The coff ee mak er will turn off automatically after one hour .
12 4. Remov e the Dr ip T ra y and Overflo w T ra y , see Figure 11. 5. Clean the Water T ank, P od Holder , P od Chamber , Adjustable Bre w Spout, Drip T ra y and Overflo w T ray with hot w ater .
13 T r oubleshooting Should a problem occur , you ma y be ab le to find an ans wer in the te xt below . If the text pro v es unhelpful or if y ou require fur ther inf or mation, please contact Consumer Service. 1. The coffee is too weak. Check the f ollowing: • the pod is placed properly in the P od Holder .
14 5. The indicator light is flashing. A flashing indicator light means the machine is heating. This nor mally lasts f or 1 1/2 -2 minutes . If indicator light is flashing rapidly (more than a second apar t), see #6 belo w . If the indicator light flashes continually f or more than 4 minutes , contact Consumer Ser vice .
15 IMPOR T ANT NO TICE If any par ts are missing or def ective , DO NO T return this product. Please call our Customer Ser vice Depar tment f or assistance . 800-577-1557 Monda y - F riday 9:00 am - 5:00 pm CST Thank Y ou LIMITED ONE YEAR W ARRANTY W arranty: This product is warr anted by Salton, Inc.
Out-of-W arranty Service: A flat rate charge b y model is made for out-of-w ar- ranty service. Include $12.00 (U .S .) f or return shipping and handling. We will notify you b y mail of the amount of the charge f or service and require you to pa y in advance f or the repair or replacement.
An important point after buying a device Salton JVPM1W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Salton JVPM1W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Salton JVPM1W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Salton JVPM1W you will learn all the available features of the product, as well as information on its operation. The information that you get Salton JVPM1W will certainly help you make a decision on the purchase.
If you already are a holder of Salton JVPM1W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Salton JVPM1W.
However, one of the most important roles played by the user manual is to help in solving problems with Salton JVPM1W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Salton JVPM1W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
