Instruction/ maintenance manual of the product FSCM100 Salton
Go to page of 16
USE & CARE INSTRUCTIONS 10 CUP PROGRAMMABLE COFFEEMAKER FSCM100 SPECIAL SELECT.
1 IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 2. Do not touch hot surfaces.
2 W ARNING: This appliance generates heat and escaping steam during use. Use proper precautions to prevent the risk of burns, fires, or other injury to persons or damage to property . 1. Do not pour liquid other than water and the cleaning solution specified in this manual into the W ater Reservoir .
3 POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). T o reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug.
GETTING TO KNOW YOUR F ARBERW ARE ® 10 CUP COFFEEMAKER 1. W ater Reservoir Lid (P/N 30654) 2. Swing-Out Filter Basket (P/N 30651) 3. W ater Reservoir 4. Carafe Lid (P/N 30652) 5. Control Panel 6. Polarized Plug 7. W arming Plate 8. Carafe w/Lid (P/N 30653) 9.
5 AUTO OFF ON ON HOUR MIN. BREW CONTROL P ANEL REMOV ABLE FIL TER BASKET AM/PM AUTO ON ON/ BREWING AUTO/OFF/ON Switch GETTING TO KNOW YOUR COFFEEMAKER (Cont.) T o remove the Removable Filter Basket for cleaning, pull Basket straight up and out of the machine.
6 INSTRUCTIONS FOR USE BEFORE BREWING COFFEE FOR THE FIRST TIME CAUTION: T o protect against electric shock, do not submerge the Coffeemaker or allow AC cord to come into contact with water or other liquids. 1. After carefully unpacking from carton, the inside of your Coffeemaker and Carafe must be cleaned.
7 DRIP STOP FEA TURE This F ARBERW ARE ® Coffeemaker has an Automatic Drip Stop Feature. During the brewing cycle, the Carafe can be removed to pour a cup of coffee from the Carafe. The Drip Stop Feature will prevent the Coffeemaker from continuing to brew coffee for up to one minute until the Carafe is returned to its proper position.
8 BREWING COFFEE IN YOUR F ARBERW ARE ® 10 CUP PROGRAMMABLE COFFEEMAKER CAUTION: Use this product with proper AC voltage rating only . Be sure to unplug the power cord when Coffeemaker is not in use for extended periods of time. 1. Lift the Carafe Lid.
9 SETTING THE CLOCK / TIMER 1. Set the T imer to the correct time of the day by pushing the HOUR Button until the correct hour appears on the LCD Display . Then push the MIN. Button to the current minutes. Be sure to note a.m. and p.m. times. NOTE: The LED in the upper-left corner of the Display indicates the P .
4. T o set Coffeemaker to brew coffee using Automatic Start-Up feature: Move the Slider to the AUTO position. The ON LED will turn off. The AUTO Indicator Light will illuminate. (See Figure 6.) At the programmed time, the Coffeemaker turn itself on automatically .
11 7. T o brew a second pot of coffee, turn the Coffeemaker off for 10 minutes and allow it to cool. Empty used coffee grounds and repeat steps for brewing coffee.. CAUTION: Failure to allow Coffeemaker to cool may cause water to overheat and spray hot steam.
12 USER MAINTENANCE INSTRUCTIONS CARING FOR YOUR CARAFE A damaged Carafe may result in possible burns from hot liquid. T o avoid breaking a Carafe: 1. Do not allow all liquid to evaporate from Carafe while on the W arming Plate. Do not heat Carafe when empty .
13 MINERAL DEPOSITS AND DECALCIFYING Y our F ARBERW ARE ® Coffeemaker must be cleaned when you begin to notice excessive steaming or the brewing time increases considerably . This condition is caused by a buildup of lime and mineral deposits from your water .
14 DECALCIFYING YOUR CARAFE Hard water can leave a whitish mineral deposit inside your Carafe. Coffee discolors these deposits, sometimes leaving a brownish stain inside the Carafe. T o remove these stains, follow these simple steps: 1. Use a solution of equal parts white vinegar and hot water .
ONE-YEAR LIMITED W ARRANTY This F ARBERW ARE® product warranty extends to the original consumer purchaser of the product. Warranty Duration: This product is warranted to the original consumer purchaser for a period of one (1) year from the original purchase date.
An important point after buying a device Salton FSCM100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Salton FSCM100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Salton FSCM100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Salton FSCM100 you will learn all the available features of the product, as well as information on its operation. The information that you get Salton FSCM100 will certainly help you make a decision on the purchase.
If you already are a holder of Salton FSCM100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Salton FSCM100.
However, one of the most important roles played by the user manual is to help in solving problems with Salton FSCM100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Salton FSCM100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
