Instruction/ maintenance manual of the product ELL0006 Ryobi
Go to page of 14
OPERA TOR’S MANUAL AIRgrip ™ Pr oCr oss ™ LASER LEVEL SELF-LEVELING ELL0006 SA VE THIS MANUAL FOR FUTURE REFERENCE Y our laser level has been engineered and manufactur ed to our high standard for dependability , ease of operation, and operator safety .
2 Introduction ..................................................................................................................................................................... 2 General Safety Rules ...................................
3 GENERAL SAFETY RULES WARNING! READ AND UNDERST AND ALL INSTRUCTIONS. Fail- ure to follow all instructions listed below , may result in electric shock, fire and/or serious personal injury . CAUTION: Use of controls or adjustments or performance of pro- cedures other than those specified herein may result in hazardous radiation exposur e.
4 SYMBOLS Some of the following symbols may be used on this pr oduct. Please study them and lear n their meaning. Proper interpretation of these symbols will allow you to operate the pr oduct better and safer .
5 SERVICE This unit has no serviceable parts. If the unit fails due to normal wear and tear within two years of purchase, return with original receipt for a replacement unit at no char ge. Call 1-800-525-2579 for your nearest AUTHORIZED SERVICE CENTER .
6 FEA TURES Fig. 1 PRODUCT SPECIFICA TIONS Recommended Use.....................................................................................................................................................Indoors AIRgrip Power Supply ...............
7 FEA TURES KNOW YOUR CROSSHAIR LASER LEVEL See Figures 1 - 2. The safe use of this product requires an understanding of the information on the pr oduct and in this operator’ s manual as well as a knowledge of the pr oject you ar e attempting. Before use of this pr oduct, familiarize yourself with all oper - ating features and safety rules.
8 ASSEMBL Y UNP ACKING This product has been shipped completely assembled. Carefully r emove the product and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the product carefully to make sure no breakage or damage occurred during shipping.
9 OPERA TION Rotate the laser lens housing until the battery compart- ment comes into view . Remove battery cover plate. Install two AA batteries accor ding to polarity indicators (+ or −) inside the battery compartment. Reinstall the battery cover plate.
10 OPERA TION ROUGH SURF ACE ADAPTOR See Figure 7. By using the rough surface adaptor , you can use the AIRgrip feature to position the unit on many non-smooth surfaces, including brick and painted cinder block. NOTE: The AIRgrip feature cannot be used with stucco or unpainted cinder block.
11 OPERA TION Fig. 11 USING A TRIPOD See Figure 10. The laser level has a 5/8 in.-20 thr eaded fitting for attaching to a tripod base (not included). This method of mounting is ideal for leveling kitchen cabinets, countertops, window framing, and more.
12 MODEL NO. ELL0006 WA VE LENGTH: 630-670 NM MAX. PO WER OUTPUT < 5MW CLASS IIIA LASER PRODUCT LASER RADIA TION- A VOID DIRECT EYE EXPOSURE Complies with 21 CFR parts 1040.10 and 1040.11 Rayonnement laser - éviter le contact oculaire direct Lire les instructions du manuel.
13 TROUBLESHOOTING Pr oblem Possible Cause Solution V acuum not running. Batteries are low . Power is turned off. Replace batteries. Press on/of f button. Laser line projection is weak. Batteries are low . Replace batteries. Laser line is hard to see.
ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road Anderson, SC 29625 Phone 1-800-525-2579 www .ryobitools.com OPERA TOR’S MANUAL AIRgrip ™ Pr oCr oss ™ LASER LEVEL SELF-LEVELING ELL0006 983000-974 6-19-07 (REV :02) • SER VICE This pr oduct has no serviceable parts.
An important point after buying a device Ryobi ELL0006 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi ELL0006 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi ELL0006 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi ELL0006 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi ELL0006 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi ELL0006, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi ELL0006.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi ELL0006. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi ELL0006 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
