Instruction/ maintenance manual of the product D130VR Ryobi
Go to page of 12
OWNER'S OPERA TING MANUAL 1/2 in. (13 mm) Electric Drill Model D130VR T ype II Double Insulated SA VE THIS MANUAL FOR FUTURE REFERENCE THANK YOU FOR BUYING A RYOBI DRILL. Your new drill has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety.
Page 2 TABLE OF CONTENTS 1. Product Specifications ................................................................................... 1 2. T able Of Contents .......................................................................................... 2 3.
Page 3 READ ALL INSTRUCTIONS 1. KNOW YOUR POWER TOOL. Read owner's manual carefully. Learn its applications and limitations as well as the specific potential hazards related to this tool. 2. GUARD AGAINST ELECTRICAL SHOCK by preventing body contact with grounded surfaces.
Page 4 be properly repaired or replaced by an authorized service center unless indicated elsewhere in this instruction manual. 31. DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.
Page 5 APPLICATIONS (Use only for the purposes listed below) 1. Drilling in wood. 2. Drilling in ceramics, plastics, fiberglass, and laminates. 3. Drilling in both hard and soft metals. 4. Using driving accessories, such as driving screws with screwdriver bits.
Page 6 POWER CORD SWITCH See Figure 2. To turn your drill ON , depress the switch trigger. Release switch trigger to turn your drill OFF . LOCK-ON BUTTON See Figure 2. Your drill is equipped with a "lock-on" feature, which is convenient when continuous drilling for extended periods of time is required.
Page 7 VARIABLE SPEED See Figure 5. Your drill has a variable speed control selector designed to allow operator control and adjustment of speed and torque limits. The speed and torque of your drill can be increased or decreased by rotating the variable speed control selector in the direction of the arrows shown in figure 5.
Page 8 RIGHT OPERA TION W ARNING: Your drill should never be connected to power supply when you are assembling parts, making adjustments, installing or removing drill bits, or when not in use. Disconnecting your drill will prevent accidental starting that could cause serious injury.
Page 9 W ARNING: Always wear safety goggles or safety glasses with side shields when operating drill. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. DRILLING See Figure 9.
Page 10 CHUCK REMOVAL See Figures 10, 11, and 12. Whenever necessary to remove the chuck for replacement, etc., use the following procedure for chuck removal: 1. UNPLUG YOUR DRILL. W ARNING: Failure to unplug your drill could result in accidental starting causing serious injury.
Page 11 MAINTENANCE GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc. W ARNING: Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc.
972000-398 OWNER'S OPERA TING MANUAL 1/ 2 in. (13 mm) Electric Drill Model D130VR T ype II Double Insulated • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Factory Service Center.
An important point after buying a device Ryobi D130VR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi D130VR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi D130VR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi D130VR you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi D130VR will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi D130VR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi D130VR.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi D130VR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi D130VR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
