Instruction/ maintenance manual of the product SP652.1 Russound
Go to page of 12
A/V DISTRIBUTION & CONTROL SYSTEMS Instruction Manual SP652.1 SP622.1.
INTRODUCTION Congratulations on selecting Russound W all-Mounted Speakers. Like all RUSSOUND speakers, they combine acoustic technology with dur a- bility and will provide year s of musical enjoyment. This manual is designed to make your SP652.1 & SP622.
WHERE TO PLACE Y OUR SPEAKERS Placement can make all the difference in how your RUSSOUND speaker system sounds. There ar e at least three “WHERE’ s” and a “HOW” to factor into your layout: .
OTHER ACOUSTIC CONSIDERA TIONS For best fidelity , there are sever al other factors to keep in mind befor e you start actual installation. Concerns and r eflections: When an in-wall speaker is placed close to the corner of a room, bass frequencies ar e emphasized.
SPEAKER WIRE PATHS In general, you should pay particular attention to the following ar eas: • Avoid running speaker wires close to house electrical wiring for any distance. If you have to run them parallel, make sur e to space the speaker wires at least two feet fr om the AC line.
CUTTING HOLES FOR THE SPEAKERS Wallboar d is an easy surface in which to make a relatively neat hole. Make sure you don’t make it any bigger than the template.
HOOKING UP Y OUR SPEAKERS IDENTIFYING “+” AND “-” Y ou need to be able to discriminate between the two conductors of the speaker wire. If your wir e has transpar ent insulation, this is easy: One conductor will be copper-colored and the other silver-color ed.
FINAL ASSEMBL Y 1. If you haven’t done so already during painting, r emove the perfo- rated grilles fr om both Russound In-Wall Speaker s. Use the clamp (dog-ear) to push the grille out from the back side.
TAKING CARE OF Y OUR NEW IN-WALL SPEAKERS RUSSOUND In-Wall Speaker s are designed to last the life of your home if you follow a few simple rules. The main “killers” of any loudspeaker system ar e: • too little power at high volumes • too much power at high volumes • transients (immediate loud passages, thumps, etc.
INSTALLA TION DURING NEW CONSTRUCTION Needless to say , installing In-Wall speakers when a house is being built is far easier than doing it later . Russound offers a ‘Speaker Rough-In Kit” . The SB-3.6 Rough-In kit is designed to provide the drywall installer s the cut-out for the In-Walls.
TECHNICAL SPECIFICATIONS SP622.1 Frequency Response: 63-2 1,000Hz Construction: 6.5" injection molded cone Dual voice coil woofer with rubber surround.
A/V DISTRIBUTION & CONTROL SYSTEMS 5 Forbes Rd. Newmarket, NH 03857, USA ☎ 603.659.5 170 • F ax 603.659.5388 e-mail: tech@russound.com Fax-On-Demand: 603.
An important point after buying a device Russound SP652.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Russound SP652.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Russound SP652.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Russound SP652.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Russound SP652.1 will certainly help you make a decision on the purchase.
If you already are a holder of Russound SP652.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Russound SP652.1.
However, one of the most important roles played by the user manual is to help in solving problems with Russound SP652.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Russound SP652.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
