Instruction/ maintenance manual of the product RHDW1 (B) (S) (G) Russell Hobbs
Go to page of 34
Dishw asher Instruction Manual For Custome r Services & Spare Parts p lease call 0845 208 8750 Opening times: Monda y - Friday 8am – 6pm & Satur day 9am – 1p m or visit us at www .
Cont ents Safety Instructions ……………………………… ………………… ………………… 3 - 4 Before using the appliance ……………………………… ……………….
Saf ety Ins tructions • Please comply with these instructions. If you do not, any damage resulting from improper , incorrect or neglig ent use o r improper co nnection or installation is not covere d by the manufacture r ’ s guar antee. • Products must be insta lled in accordance with the manufacturer's saf ety recommenda tion s.
Saf ety Ins tructions • Adhered c ut lery that is not heat resis tant. • Lead crys tal glasses. • Cutting boards. • Items manufactured with s ynthetic fibre.
Bef ore using the appliance • Products must be insta lled in accordance with the manufacture r's saf ety recommenda tion s. • This appliance must only be used for its intended purpose, domestic dishwashing.
Bef ore using the appliance For Cus tomer Services & Spare P arts please call 0845 208 8750 Opening times: Monday - Frida y 8am – 6pm & Saturda y 9am – 1pm or visit us at ww w .productcareuk.com 6 Note The dra wings in the book may v ary from y our dishwasher model.
Bef ore using the appliance 7 Control P anel 1. Pow er On/Off button- when the power On/Off butt on is pressed, the light on the Start/Pause button will illuminate 2.
Inst allatio n 8 • Products mus t b e insta lled in accordance with the manufacturer's saf ety recommenda tion s. F ailure t o d o so will void th e ma nufacturer ’ s guaran tee. • Bef ore c onn ecting y our applian ce to the mains at home, mak e sure to check the conf ormity of the voltage settings.
Inst allatio n 9 W at er Connection Ensure the machine is c onnected to a clean, cold running w ater supply . W at er inlet hose Only use the wa ter inlet hose supplied with this machine. Do not r e - use old inlet hoses. Connect the wat er in let hose d irectly to the w ater inlet tap.
Inst allatio n Electri cal conn ection • Products must be installed in accordanc e wi th the manufacturer's sa fety recommendations. • Bef ore pr ocee ding with the electrical connection , v erif y that th e current c arrying capacity of th e s ys tem and the sock et is adeq uate for the maximu m po wer ra tin g of th e dishwasher .
Inst allatio n 2. R emo ve the scr ews that hold the worktop, these are loc ated at the rear of the machine. Wh en un screw ed an d r emo ved, pu sh t he fr ont pane l 1 cm from the front side towards the rear and lift it. 3. Adjust the f eet of th e machine according to the slope of th e flo or .
How to use W at er • T o maximise cleaning quality , the machine requires soft wat er , (low calc areous wa ter). • Lime scale may f orm on dishes and the interior of t he machine in hard wa ter areas. This will reduce the perf ormance of the machine.
How to use 12 W at er softness tes t • The washing ef fectiveness of your machine depends on the softness of the tap w ater . For this reason, your machine is equipped w ith a sys tem that reduces the har dness in the mains w ater supply .
How to use 13 Adjusting salt consumption Important note The hardness setting of y our dishwa sher set to level 3 as a f actory def ault setting Water Hardness Level British Hardness dE Hardness Level .
How to use 14 Adjusting salt consumption 4 2 3 1 1. Move the pr ogramme dial t o t he R eset posit ion (1 ) and press the pow er button to the off position. 2. After swit ching the progr amme dial to the R eset position, press the Start/P ause button and hold it own.
Combined Deterg ents Deterg ent manuf acturer s also manufacture combined det ergents that ar e called ‘2 in 1’ , ‘3 in 1’ and ‘5 in 1’ . This dishw asher is suitable f or u se of 2 in 1 and 3 in 1 deterg ents only and must be used on a se tting of 70 ° C or more for them to work eff ectively .
How to use 15 For Cus tomer Services & Spare P arts please call 0845 208 8750 Opening times: Monday - Frida y 8am – 6pm & Saturda y 9am – 1pm or visit us at ww w .
How to use 16 Items not suitable f or dishwashing • Do not allow cigar ette ashes, candle r emains, polish or chemic al substances to enter the dishwasher . • Cutlery w ith bone, ivory or nacr e coat ed hand les, glued items or items soiled w ith abrasiv e chemicals.
How to use 17 Loading your dishwasher • If you pr operly place y our dishes into the machine, y ou will be usin g it in the best wa y in terms of energy consumption , washing and drying performance • Ensure dishes are placed in the machine with sufficient space f or wa ter to flow around the dishes.
How to use 17 Upper bask et height adjustme nt The bask et height adjustment mechanism on the upper baske t of y our machine is designed to let y ou adju st the height of your t op bask et upwards or downwards, withou t removing it from y our machine when it is f ull.
How to use 17 Goblet clamp It enables the saf e washing of your goblets with long foot and stems. Do not lean your long glasses on on e another , as t hey w ill n ot remain stable and c an be damaged during w ashing . T o create wide spaces when you do not w ant to use goblet clamp, t urn it so it res ts against the side of the bask et.
How to use 18 Loading e xamples Lower bask et Upper bask et Incorrect loads.
How to use 19 Standard loadin g • Upper and low er baske ts: 12 place settings (combined/in t otal). The upper bask et should be adjusted to the high position and cups shou ld be placed on the dish rack pins.
20 W ash ing procedur e & pr ogr amme selectio n Important note Short progr ams do not include a drying s tep The values declared above are the values obtained und er labora tory c ond itions acc ording torelevan t s tandards.
W ash ing procedur e & pr ogr amme selectio n 21 Progr amme selection • T o switch on the machine, press the On/Off butt on • T o select a progr amme, turn the pr ogramme dial to the desired position.
Maint enance 22 Cleaning the machine r egularly will pr olong the machine’ s service lif e . Oil and li me accumula tion If oil and lime accumulate in the machine, run a full c ycle with the machine emp ty but with deterg ent. Machine door seal Use a damp c lot h to wipe r esidu es on the door seals regularly .
Pull and remov e the metal/plastic filter (3). Then pull the c oarse filter out of the micr o filter (2). Rinse this w ith w ater under a tap and re fit the metal filter . Insert the c oarse filter into the micro filter and line up th e corresponding markings.
T rouble shooting 24 Error codes Progr amme monitor light is on and Start/P ause light is fl ashing Y our machine door is open. Shut the door . The program me won’t sta rt • Check the machine is plug ged in. • Check the indoor fuses in your home’ s fuse box.
‘W ash/Dry ’ and ‘End’ ke ep flashing • W ater ov erflow alarm is active. • T urn off the tap and contact Pr oduct Care on 0845 208 87 50 for furt her advice. Control lamps illuminated a fter cycle has finished The ‘On/Off ’ button has not been released.
White st ains remain on the dishes after washing • Not enough deterg ent is being used. • Rinse aid setting is too low . • Salt is needed due to hard wa ter • W ater softener setting at low level. • Salt compartment cap not closed properly .
Specificati on 27 For Custome r Services & Spare Parts p lease call 0845 208 8750 Opening times: Monda y - Friday 8am – 6pm & Satur day 9am – 1p m or visit us at www .
Connection t o the mains su pply W ARNING- THIS APPLIANCE MUST BE EARTHED This appliance is designed to oper ate fr om a mains supply of AC 230 V ~ 50 HZ . Check that the v oltage mark ed on the product c orresponds with your supply voltage. This product is fitted with a 13 A plug complying with BS 1363 .
Spar e parts 29 For Custome r Services & Spare Parts p lease call 0845 208 8750 Opening times: Monda y - Friday 8am – 6pm & Satur day 9am – 1p m or visit us at www .produc tcare uk.com Spare part Contact details Upper bask et Av ailable a t ww w .
This s ymbol is known as th e 'C rossed-ou t w hee lie bin Symbol'. When this s ymbol is mark ed on a product/bat teries, it means t hat the product/bat teries should not be disposed of with your g eneral household waste.
An important point after buying a device Russell Hobbs RHDW1 (B) (S) (G) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Russell Hobbs RHDW1 (B) (S) (G) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Russell Hobbs RHDW1 (B) (S) (G) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Russell Hobbs RHDW1 (B) (S) (G) you will learn all the available features of the product, as well as information on its operation. The information that you get Russell Hobbs RHDW1 (B) (S) (G) will certainly help you make a decision on the purchase.
If you already are a holder of Russell Hobbs RHDW1 (B) (S) (G), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Russell Hobbs RHDW1 (B) (S) (G).
However, one of the most important roles played by the user manual is to help in solving problems with Russell Hobbs RHDW1 (B) (S) (G). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Russell Hobbs RHDW1 (B) (S) (G) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
