Instruction/ maintenance manual of the product 10444 Russell Hobbs
Go to page of 10
ESPRESSO MAKER Model No. 10444 Instructions and guar antee 10444_IB_3-5-02 5/3/02 3:19 PM Page 1.
2 10444_IB_3-5-02 5/3/02 3:19 PM Page 2.
R ead these instructions before using your Espresso Maker and keep them in a safe place for future reference. If you pass the Espresso Maker on to anyone else, pass on the instructions too. R emove all packaging, but keep it until you’re satisfied that the Espresso Maker is working.
Safety valve In the unlikely event of the normal controls failing, a safety valve in the pressure cap will open automatically and release excess pressure. If this happens, don’t touch the espresso maker . Unplug it and let it cool down for at least one hour before trying to release the pressure or open the pressure cap.
The control The control switches the element on and off and operates the valve. The “Heating” light indicates when the element is on. The positions are, anti-clockwise from the bottom: Hot water for coffee : the valve directs the output from the boiler to the brewing head to make coffee, the heater is switched on.
Releasing steam Before you can remove the pressure cap safely , you have to release the steam remaining in the pressure tank. W arning: To avoid the risk of scalding, keep fingers, hands, etc. clear of the escaping steam. 21. Unplug the espresso maker from the power socket (switch the socket off first if it’ s switchable).
Follow points 1 to 18, then jump to point 31. At point 3, add extra water (half a cup to a cup), to generate the steam to heat and froth the milk. Use the carafe to measure the water . For 2 cups of coffee, fill the carafe to between the 2 and 3 cup marks, for 4 cups, fill to just below the spout.
Remov ing the drip tr ay , cover , and frother To lift the drip tray cover , insert a fingertip in the indent on its right and lift it out. Y ou can then lift the drip tray out (try not to spill the drips). To remove the milk frother , support the steam pipe with one hand and pull the milk frother gently down with the other hand.
Connection to the mains supply Check that the voltage marked on the appliance corresponds with the supply voltage. The appliance must be earthed. It’ s supplied with three-core mains lead and a 13A plug complying with BS1363. T o replace the fuse, use a 13A AST A or BSI approved fuse conforming to BS1362.
Spare parts P hone Customer Service Dept on 0161-947-3111. T ell them the Model No. (on the product’ s rating label), and the part(s) you need. They’ll give you the price(s).
An important point after buying a device Russell Hobbs 10444 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Russell Hobbs 10444 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Russell Hobbs 10444 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Russell Hobbs 10444 you will learn all the available features of the product, as well as information on its operation. The information that you get Russell Hobbs 10444 will certainly help you make a decision on the purchase.
If you already are a holder of Russell Hobbs 10444, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Russell Hobbs 10444.
However, one of the most important roles played by the user manual is to help in solving problems with Russell Hobbs 10444. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Russell Hobbs 10444 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
