Instruction/ maintenance manual of the product MMSV58 Audiovox
Go to page of 10
MMSV58 5.8" LCD SUN VISOR MONITOR WITH MIRROR AND DOME LIGHT 0 Installation Guide.
Notice An LCD display and/or video monitor may be install ed in a motor vehicle and visible to the driver if the LCD display or video monitor is used for vehi cle information, system control, rear or side observation or navigation.
MATERIALS INCLUDED IN THIS PACKAGE: 1) MMSV58 Sun Visor Video Monitor (P/N 136-3781) (1 pc) 2) Monitor Mounting Shroud (P/N 1024053) (1pc) 3) Remote Control (P/N 136-B3696) (1pc) 4) Hardware Package:- • M2.
INSTALLATION NOTES • NOTE: System component installation options vary, see the individual owner’ s manuals for each component in your system to obtain a full understanding of each component’ s operation. • NOTE: Each vehicle is different. Your specific disassembly and reassembly may vary slightly from the installation guide shown.
2. Remove all accessories from the visor su ch as mirror/door/light assemblies, etc (if applicable) and set aside for re-assembly. Figure 3. Sun Visor With All Accessories Removed 3. Once all accessories are removed, check the dimensions and material depth of the sun visor to estimate the fit for your application.
5. Using a Razor Knife cut an “X” through the material. Figure 5. Cutting The Visor Material 6. Peel back the 4 flaps. Carefully cut out the plas tic of the visor using a rotary tool. Be sure that the tool does not grab t he fabric/leather or damage may occur to the material.
Figure 7. Installing The Monitor Shroud 10. Snap the screen into the visor mounting sh roud Screw the screen to the visor mounting shroud using the 4 screws (supplied). 11. Install the 4 screw caps (supplied) in the holes on the 4 corners of the assembly.
WIRING GROUND ACTIVATED Figure 9. Pow er/Signal Harness MMSV58 VCP (VIDEO 1) DVD (VIDEO 2) Video Source Pow er Source Emergency Brake Sw itch Vehicle Ground Figure 10.
TROUBLESHOOTING Remedy: -Verify +12 VDC on Red wire at 7 pin Harness behind video monitor. Verify ground connection w ith continuity test from known good ground to black w ire at 7 pin Harness -Verify that the correct source is selected (i.e.: 1,2,3 or 4).
9 © Copyright 2004 AEC 150 Marcus Blvd. Hauppauge, NY 11788 128-7158.
An important point after buying a device Audiovox MMSV58 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox MMSV58 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox MMSV58 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox MMSV58 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox MMSV58 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox MMSV58, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox MMSV58.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox MMSV58. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox MMSV58 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
