Instruction/ maintenance manual of the product CL-700 Runco
Go to page of 33
O WNER ’ S O PERA TING M ANU AL CL-700 www.htrgroup.com.
.
Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’ s Finest Home Theater Product s”. With proper inst allation, setup and care, you should enjoy many years of unparalleled video performance.
EFFECTIVE W ARRANTY DA TE: This warranty begins on the effective date of delivery to the end user . For your convenience, keep the original bill of sale as evidence of the purchase date. IMPORT ANT : W ARRANTY REGISTRA TION: Please fill out and mail your warranty registration card.
R u nco CL-700 Video Pro j ect o r 1 Runco CL-700 Video Projector User’s Manual Thank you for your purchase of this qualit y Runco video projector! It has b een designed to provid e you with the quality of video that is expected in a home theater.
.
1 . Overview User’s Manual 3 1. Overview Features High Contrast and Picture Quality This single-DMD DLP TM projector provides excellent contrast ratio, color uniformity and seamlesss picture quality. Fantastic Dynamic Performance and Rich Gray-scale With a 6-segment color wheel, the picture's refresh rate can attain speeds of up to 240 Hz.
Location Front / Upper Side Rear / Bottom Side 3 2 4 4 1 6 8 9 5 7 4 1. Front Lamp Cover Remove this cover when replacing the lamp. 2. Projection Lens 3. Front IR Sensor 4. Ventilation Holes (exhaust) 5. Focus Ring and Zoom Ring Adjusts the focus and zoom of image.
1. Overview 5 Controls and Functions ❚ Control Panel 1. POWER LED Indicate the status of the pow er ■ Oran g e w h en the AC p ower cord is pl u gged i n to the wa l l o u t l et (standby mode). O n ce in the standby mode, you ca n turn on the projector by pressin g ON key on the remote control for ONE second.
1. Overview 6 ❚ Connector Panel 1. Video (RCA Jack) Composite video si gnal input. 2. S-Video (mini DIN 4-pin) Y/C (S-video) sig nal input 3. Component (RCA Jacks) 480i Component (Y/C B /C R ) video signal input 4. RGB/ H DTV (BNC) or Progressive Scan DVD players DTV Y/P B /P R or DTV RGB vide o signal input.
1 . Overv iew 7 Remote Control CUSTOM Recall memory 1~3 sequentially (see "Selecting Video Memory" on page 16) PICTURE Access the Picture Setting menu (see "PICTURE Setting Page" on page 18) ARROW ( , , , ) Use to select the menu or to make various adjustments.
2. Installation 8 2. Installation Remote Control Notes on Batteries ■ Make sure that the battery polarities ar e correct when installing the batteries.
2. Installation 9 ❚ Adjust the Lens Z oom/Focus ring ❚ Adjust the height Adjust the projected image size you need with the zoom ring on the lens. To focus the image, ro tate the focus ring on the lens. There are 4 screw adjusters on the bottom of this unit.
Screen __________ (H) x __________ (W) C) VERTICAL OFFSET : For Standard Throw Lens Option: 2 inches T wo inches offset means that the center of the projection lens is 2" above the top of the screen (inverted ceiling mount) or 2" below the bottom of the screen (upright floor mount).
Installa tion with Shor t Lens Option 10-A 2. Installation Screen Center Screen T op Projector Base angle C B A Full Screen Length Half Screen Length Base plate to center of lens 2.78 in. (70.64 mm) 4.6 in. (1 17.7 m) 5.1 in. (130.2 mm) Ceiling Floor Screen Center Screen T op Projector Base angle C B A Full Screen Length Half Screen Length 2.
CL- 700 @ 1280 x 720 w ith Standard L ens Scr een Hei ght Scr een W idth Mi n Throw Di stance Max Thr ow Distance Vertical Off set P os i tion 40.5 72 144.18 173.02 2" V ertical Off set 43 77 153.08 183.70 2" V ertical Off set 45 80 160.20 192.
3. Connecting 12 3. Connecting When connecting, make sure to: 1. Turn off all equipment before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly connected. 4. Connect all audio signals to external speakers.
3. Connecting 13 ❚ Progressive Comp onent (DTV Y/P B /P R ) ❚ RGBHV (DTV RGB) The RGB BNC input supports two kinds of HD TV formats: Progressive component (DTV Y/P B /P R ) and DTV RGB.
3. Connecting 14 Connecting a Computer This unit only supp orts resolutions up to XGA. If the input signal is greater tha n XGA, the projector will display a warning message.
4. Basic Operation 15 4. Basic Operation Turning on the Power Zoom/ Focusing Selecting Input Source ■ The Power LED lights orange when power is applied and the power switch is turned on. ■ Press and hold the ON key on the remote control for ONE second to turn on the unit.
4. Basic Operation 16 Selecting "ASPECT ratio" Selecting Video Memory Setting Menu ■ Select the proper Aspect Ratio according to the format of signal content. There are four Aspect Ratio for choice: ■ ANAMORPHIC: 4:3 image is stret ched horizontally to fit the 16: 9 screen.
ACTIVE PIP- PIP LIGHT PIP+ ON VIDEO S-VIDEO COMPONENT COMPONENT HD RGB HD PC OFF PIP Function * Press the PIP button to enable the PIP function * For PIP purposes, there are two groups of inputs separated by their display modes: Video Group: V ideo, S-Video and Component Y/C B /C R inputs Graphic Group: HDTV input and Computer input.
5. Men u 18 5. Menu Using the Menu T h is u n it is e q u ip p ed with a n on scr ee n d isp la y ( O SD ) m en u f or m a kin g va r iou s a d ju stm en ts a n d se ttin g s. T h er e a r e 3 d if f er en t m en u la n g u a g es; p a g e 21 La n g u a g e se ttin g f o r m or e d eta ils .
5. Men u 19 5. T IN T : A d ju st color to n es ( 0 ~ 30) . T h e h ig h er th e se ttin g , th e p ic tu r e b ec om es g r ee n ish . T h e low er th e se t ti n g , th e p ictu r e b ec om es p u r p lis h . 6. C O L O R T EMP .: A d ju st th e color tem p er a tu r e.
5. Menu 20 Active Image Area Active Image Area 16:9 Screens: LETTERBOX: The image in the Letterbox mode will be stretched vertically, and the top and bottom portion 'blanked off'. This ratio is best suited for LaserDisc movies or non-anamorphic DVD's.
5. Men u 21 ENVIRONMENT Setting Page In th is Me n u, th e g lob a l se ttin g s for th e p r oj ec tor ca n b e m a d e. T h er e a r e 5 M en u I te m s: D E F A U L T — LA M P T IME R — B A C K L IG H T — A U T O O FF — LA MP H O U R S. 1. D EFA U LT : L oa d th e d ef a ul t va lu e of cu r r en t in p u t sou r ce .
6. Additional Information 22 6. Additional Information Warning Message Rep l ace the Lamp (Contact your Runco Dealer) ■ It is normal for lamp to be darker when this unit has been used for a period of time. ■ " Lamplife is expired ! Please change a new lamp.
6. Additional Information 23 Troubleshooting 10. Tighten th e th ree screws of lamp shield. 11. Put on the front lamp cover. 12. Tighten th e screw of front lamp cover. 13. Turn on the power and go into Environmen t Setting Page to reset the "Lamp Timer " item.
Spec ifica tions Proje ctor Type: Digit al Li ght Processing™ (DLP™ ) Nati ve Resolutio n: 1280 x 720 Vide o Sta ndards : NTSC, N TSC 4.43, PAL -M, PAL-N, SECA M Lam p: 210W Lam p Life: 1000 hours Pict ure Size: 40” to 300” diagonal Th row D i stance: Standar d Throw Lens: 2.
Dimensions Unit: in. (mm) 15.75 in. (400 mm) 1.6 in. (4.5 mm) 1.4 in. (35.26 mm) 13.09 in. (332.5 mm) 6.3 in. (160 mm) 5.9 in. (150 mm) 7.93 in. (201.5 mm) 13.66 in. (347 mm) 4.6 in. (117.7 mm) 5.1 in. (130.2 mm) 6. Additional Information 25 User's Manual + 9.
RS-232C Control Codes Code Function X01 Power On X02 Power Off X03 Message On X04 Message Off X10 Menu (arrow key) X11 Enter (arrow key) X12 Exit (arrow key) X13 Up (arrow k.
.
RUMA-009600 rev 9-02 Runco International . 2900 Faber S treet . Union City , CA 94587 . ph (510) 324-7777 . fax (510) 324-9300 . www .runco.com.
An important point after buying a device Runco CL-700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Runco CL-700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Runco CL-700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Runco CL-700 you will learn all the available features of the product, as well as information on its operation. The information that you get Runco CL-700 will certainly help you make a decision on the purchase.
If you already are a holder of Runco CL-700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Runco CL-700.
However, one of the most important roles played by the user manual is to help in solving problems with Runco CL-700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Runco CL-700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
