Instruction/ maintenance manual of the product RS910 RuggedCom
Go to page of 9
The RuggedServer™ RS910 is an industrially hardened serial device server with an integrated, fully managed, Ethernet switch, designed to operate reliably in electrically harsh and climatically demanding environments. The RS910 can be configured with 2 serial ports (RS485/RS422/RS232) and/or up to 3 Ethernet port s (copper of fiber).
Serial Port s: 2 RS485/RS422/RS232 DB9 or RJ45 Up to 230kbp Serial Fiber Interface Option Integrated Power Supply Universal high-voltage range: 88-300VDC or 85 - 264V AC Popula.
www .RuggedCom.com 3 RuggedSwitch™ RS910 RuggedServer TM RS910 2-Port Serial Device Server with up to 3 Port s Managed Ethernet Switch RO S TM F ea tur es Serial IP Encap sulation Many 'legacy' devices (RTU, PLC, IED, etc.) only support serial communications via RS232, RS422 or RS485.
www .RuggedCom.com 4 RuggedSwitch™ RS910 RuggedServer TM RS910 2-Port Serial Device Server with up to 3 Port s Managed Ethernet Switch Can be enabled on a per VLAN basis. Detects and filters all multicast streams regardless of whether subscribers exist.
www .RuggedCom.com 5 RuggedSwitch™ RS910 RuggedServer TM RS910 2-Port Serial Device Server with up to 3 Port s Managed Ethernet Switch EMI and En vir onmental Type T ests Environmental T ype T ests .
www .RuggedCom.com 6 RuggedSwitch™ RS910 RuggedServer TM RS910 2-Port Serial Device Server with up to 3 Port s Managed Ethernet Switch Power Supply . Power Consumption: 10W MAX . 24VDC: 9-36 VDC, 0.4A . 48VDC: 36-72 VDC, 0.2A . HI V oltage AC/DC: 88-300VDC, 85-264V AC, 0.
www .RuggedCom.com 7 RuggedSwitch™ RS910 RuggedServer TM RS910 2-Port Serial Device Server with up to 3 Port s Managed Ethernet Switch Fiber Specifica tions and Mec hanical Dr awing Fiber Optical Specifications Parameter Fiber Port T ype Mode Multimode Singlemode Connectors MTRJ / ST / SC / LC LC / SC / ST T ypical Dist.
www .RuggedCom.com 8 RuggedSwitch™ RS910 RuggedServer TM RS910 2-Port Serial Device Server with up to 3 Port s Managed Ethernet Switch RS910 -_____ -____ -____ -____ -_____ PS M S E1 E2 PS: Power Supply . 24 = 24 VDC (9-36 VDC) . 48 = 48 VDC (36-72 VDC) .
www .RuggedCom.com 9 RuggedSwitch™ RS910 RuggedServer TM RS910 2-Port Serial Device Server with up to 3 Port s Managed Ethernet Switch RuggedCom Inc.
An important point after buying a device RuggedCom RS910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RuggedCom RS910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RuggedCom RS910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RuggedCom RS910 you will learn all the available features of the product, as well as information on its operation. The information that you get RuggedCom RS910 will certainly help you make a decision on the purchase.
If you already are a holder of RuggedCom RS910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RuggedCom RS910.
However, one of the most important roles played by the user manual is to help in solving problems with RuggedCom RS910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RuggedCom RS910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
