Instruction/ maintenance manual of the product RSL-380 Royal Sovereign
Go to page of 7
14 RSL-380 Laminator OWNER'S MANUAL 1 1. W ARRANTY Royal Sovereign International warrants the equipment sold is free from defects in material and workmanship for a period of One (1) year for Parts and Labor from the date of installation, excluding lamination rollers which are warranted for Six (6) months.
RSL-380 3 2 T ABLE OF CONTENTS 1. INTRODUCTION TOPIC P AGE 1. Introduction ......................................................................................................... 3 2. Package Contents ................................................
RHL-380 5 4 3. SAFETY PRECAUTIONS Failure to comply with any of the following safety procedures could result in serious injury. Please read the instructions carefully and keep for future reference. 1. Only a licensed electrician should install wiring and outlet for the laminator.
RSL-380 6 5. FEA TURES GUIDE 6. OPERA TION INSTRUCTIONS Power Switch (1) - Located on the rear of the machine. “I” (on) “0” (off). (Fig. 1) Cross Cutter (2) - Used to cut off the laminated web. (Fig. 1) Feed Guide (3) -The feed guide permits alignment of the item(s) to be laminated.
9 8 7. FILM LOADING & THREADING 1.Slightly slide the shaft to the right and pull it out from the machine. LOADING UPPER ROLL FILM 2. Take both lock core adapters off of the shaft 3.Insert one of the core adapters into the right end of the film core.
10 RSL-380 11 8. MAINTENANCE 4. Insert the film shaft into the roll of film from the right side with the copper end last. Align and insert the core adapter on the left end of the film core LOADING LOWER ROLL FILM 1. Repeat steps 1-5 to load the lower roll film.
13 12 RSL-380 Rollers do not operate after the RUN/STOP button is pressed Roller is not heating Poor Lamination Problem Cause Remedy 1. Safety cover is open 2. Power cord is not plugged in 3.Machine is not turned on Call your authorized dealer 1. Film tension is unbalanced.
An important point after buying a device Royal Sovereign RSL-380 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Royal Sovereign RSL-380 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Royal Sovereign RSL-380 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Royal Sovereign RSL-380 you will learn all the available features of the product, as well as information on its operation. The information that you get Royal Sovereign RSL-380 will certainly help you make a decision on the purchase.
If you already are a holder of Royal Sovereign RSL-380, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Royal Sovereign RSL-380.
However, one of the most important roles played by the user manual is to help in solving problems with Royal Sovereign RSL-380. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Royal Sovereign RSL-380 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
