Instruction/ maintenance manual of the product RSL-2702 Royal Sovereign
Go to page of 10
19 RSL-2702 Laminator OWNER'S MANUAL Read all instructions carefully before use. For any Customer Support needs please choose the Customer Support tab on www.royalsovereign.com Royal Sovereign International Inc. www .royalsovereign.com RS International Australia PTY.
RSL-2702 2 1 T ABLE OF CONTENTS 1. INTRODUCTION TOPIC P AGE 1. Introduction .......................................................................................................... 2 2. Safety Precautions ............................................
RSL-2702 4 3 3. INCLUDED WITH LAMINA TOR 4. PRODUCT IDENTIFICA TION 5. LOADING FILM 1. As shown in picture 1, insert auto grips onto the upper/lower film shaft. 2. As shown in picture 2, using the special tool, fix the auto grips on the film shaft with set-screws.
RSL-2702 5 6. THREADING FILM 8. Carefully pull up the laminate from the lower roll up towards the first idle bar and then around the back side of the second Idler (Caution: lower roller may be hot).(Picture 3) 9. Tack the lower film to the upper film that is resting on the main roller (Picture 4).
8 7 1. Follow the steps in the "Loading Film" procedure by loading the upper shaft with pressure sensitive film, e.g. (Royal Print-Pro Film) and lower shaft with pressure sensitive mounting adhesive films or backing paper (Royal Sovereign White-Mount or Clear-Mount).
RSL-2702 10 9 9 8. CONTROL P ANEL 1. UPPER : To change upper roller temperature by pressing button, then up or down arrow. (range 32~302°F or 0~150°C) 2. LOWER : To change lower roller temperature by pressing button, then up or down arrow. (range 32~302°F or 0~150°C) 3.
RSL-2702 12 11 1. Turn on the power switch located on the rear of the machine. 2. Set the pressure lever to the "Laminating mode". 3. Increase the roller temperature. If you already have a setting in the memory that you want to use press the button and then the or buttons to select your desired setting.
14 13 RSL-2702 9.2. COLD LAMINA TING 1. Put cold roll film on upper shaft. Load backing paper on the lower shaft as per illustration 6.2 on page 7. 2. Pull COLD film and fix it so that the Release Liner can be wound on take-up mandrel clockwise. (Revolve core to make Release Liner a little tight) 3.
RSL-2702 16 15 12. TROUBLESHOOTING Cleaning the Body of the laminator To clean the machine body, dampen a cloth with water only and gently wipe the machine clean.
RSL-2702 18 17 14. SPECIFICA TIONS 13. Recommended T emperature and Speed Settings. NOTE: Speed and temperature should be adjusted in accordance with film manufacturer's recommendations. NO 1 2 3 4 5 6 7 8 9 Speed 5 4 5 4 5 3 4 3 3 Func'No 1 2 3 4 5 6 7 8 9 Temp Speed Remark Preset User Film thickness 38 micron (1.
An important point after buying a device Royal Sovereign RSL-2702 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Royal Sovereign RSL-2702 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Royal Sovereign RSL-2702 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Royal Sovereign RSL-2702 you will learn all the available features of the product, as well as information on its operation. The information that you get Royal Sovereign RSL-2702 will certainly help you make a decision on the purchase.
If you already are a holder of Royal Sovereign RSL-2702, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Royal Sovereign RSL-2702.
However, one of the most important roles played by the user manual is to help in solving problems with Royal Sovereign RSL-2702. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Royal Sovereign RSL-2702 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
