Instruction/ maintenance manual of the product RSC-1650H Royal Sovereign
Go to page of 9
17 RSC-1650H/HR and RSC-1650C Laminators OWNER'S MANUAL Royal Sovereign International Inc. www .royalsovereign.com Read all instructions carefully before use. For any Customer Support needs please choose the Customer Support tab on www.royalsovereign.
RSC Series 2 1 T ABLE OF CONTENTS 1. INTRODUCTION TOPIC P AGE 1. Introduction .......................................................................................................... 2 2. Safety Precautions ..........................................
MODEL RSC-1650H RSC-1650HR RSC-1650C Power Supply 220-240V 120V 220-240V 200V 220-240V 120V 50/60HZ 50/60HZ 50/60HZ 50HZ 50/60HZ 50/60HZ single phase RSC Series 4 3 3. INST ALLA TION Note: The laminator should be installed by a trained service technician.
NO. PART NAME RSC-1650H RSC-1650C RSC-1650HR 1 SAFETY COVER O O O 2 EMERGENCY SWITCH O O O 3 FRAME-PAPER GUIDE O O O 4 FEED TABLE O O O 5 MAIN ROLLER O O O 6 ASSEMBLY STAND O O O 7 REMOTE CONTROL O O .
RSC-1650H/C/HR Speed# Speed(Ft/min,M/min) 1 4(1.2) 2 6(1.7) 3 7(2.2) 4 9(2.6) 5 10(3.1) 6 12(3.6) 7 14(4.2) 8 15(4.5) 9 16(5.0) RSC Series 8 7 7. SPEED AND TEMPERA TURE SETTINGS 8.
RSC Series 10 9 1 1. LOADING FILM Royal Sovereign films are wound with the adhesive side facing the inside of the roll (adhesive in). Figure 1 Figure 2 Figure 3 Figure 5 Figure 4 Loading films to the top and bottom film shafts: (See page 5 for assistance with parts identification).
RSC Series 12 11 12. THREADING FILM Figure 1 Figure 2 Figure 3 12.1. Decaling 1. Turn the power switch on (“I” position). The Power switch is located on the rear left side of the unit. 2 . Complete the steps as in the “LOADING FILM” section (see page 10).
RSC Series 14 13 Figure 1 1. Lay the decaled image face down on a flat surface. Carefully peel back and put a crease along the edge of the release liner (Approximately 1 inch or 25mm, Figure 1). 2. With the image facing up, align the image onto the board.
RSS, RSR, RSH Series 16 15 RSC Series 16. SPECIFICA TIONS RSC-1650C AC100, 200, 220~240V 50/60Hz 120V 60Hz 100 W,130 W 1650mm / 65" 25 ~ 250mic / 1~10mil 5 m/min / 16.4 ft/min Not applicable None DC geared Not applicable 9 settings 2 Roller 2.25", 3" (Auto grip 2.
An important point after buying a device Royal Sovereign RSC-1650H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Royal Sovereign RSC-1650H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Royal Sovereign RSC-1650H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Royal Sovereign RSC-1650H you will learn all the available features of the product, as well as information on its operation. The information that you get Royal Sovereign RSC-1650H will certainly help you make a decision on the purchase.
If you already are a holder of Royal Sovereign RSC-1650H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Royal Sovereign RSC-1650H.
However, one of the most important roles played by the user manual is to help in solving problems with Royal Sovereign RSC-1650H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Royal Sovereign RSC-1650H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
