Instruction/ maintenance manual of the product RSC-1400H Royal Sovereign
Go to page of 10
19 RSC-1400C/1400H Laminators OWNER'S MANUAL Royal Sovereign International Inc. 17. W ARRANTY Royal Sovereign International warrants the equipment sold is free from defects in material and workma.
RSC-1400C/H 2 1 T ABLE OF CONTENTS 1. INTRODUCTION TOPIC P AGE 1. Introduction .......................................................................................................... 2 2. Safety Precautions .........................................
MODEL RSC-1400C RSC-1400H Power Supply 220-240V 120V 220-240V 120V 50/60HZ 50/60HZ 50/60HZ 50/60HZ single phase RSC-1400C/H 4 3 3. INST ALLA TION Note: The laminator should be installed by a trained service technician. ELECTRICAL REQUIREMENTS The laminator comes fully assembled, except for the feed table and paper guide to avoid shipping damage.
NO. PART NAME RSC-1400C RSC-1400H 1 SAFETY COVER O O 2 EMERGENCY SWITCH O O 3 FRAME-PAPER GUIDE O O 4 FEED TABLE O O 5 MAIN ROLLER O O 6 ASSEMBLY STAND O O 7 FOOT PEDAL O O 8 TENSION CONTROL KNOBS O O 9 PRESSURE LEVER O O 10 CONTROL PANEL O O 11 UPPER IDLE BAR O O 12 RELEASE LINER TAKE UP O O 13 REMOTE CONTROL O O RSC -1400C/H 5 5.
RSC-1400C/H Speed# Speed(Ft/min,M/min) 1 4(1.2) 2 6(1.7) 3 7(2.2) 4 9(2.6) 5 10(3.1) 6 12(3.6) 7 14(4.2) 8 15(4.5) 9 16(5.0) RSC-1400C/H 8 7 7. SPEED AND TEMPERA TURE SETTINGS 8.
RSC-1400C/H 10 9 9 1 1. LOADING FILM Royal Sovereign films are wound with the adhesive side facing the inside of the roll (adhesive in). Loading films to upper and lower film shafts: (See page 5 for assistance with parts identification.) 1. Adjust the auto grip to fit to the film and tighten the auto grip screw (Figure 1).
12 11 RSC-1400C/H Figure 3 9. Cut and separate the release liner and the film. (Figure 3) 10. Thread the craft paper behind the Lower Idle Bar to the top film that is resting on the main roller (do not use the Lower Idle Bar for Mounting). (Figure 4) 11.
14 13 RSC-1400C/H 4. Flip the image over the top roller and hold on to the release liner (Figure 4). 5. Press the foot pedal once, and then let it go while slowly pulling the release liner as the board enters the main roller nip (Figure 5) 6. Press the foot pedal once again when the board has completely exited from the rear of the unit.
RSC-1400C/H 16 15 4. Disassemble the power switch bracket and place the left rewinder outside of the frame; fasten with round head 3/16"(M5) screws (included in the option kit).
18 17 RSC -1400C/H 16. SPECIFICA TIONS Description RSC-1400H RSC-1400C Power supply AC 100, 200, 220~240V 50/60Hz 120V 60Hz Power consumption 1650W, 800W 100W Max laminating width 1400mm / 55" Film thickness 25~250 mic / 1~10mil Max laminating speed 5m/min / 16.
An important point after buying a device Royal Sovereign RSC-1400H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Royal Sovereign RSC-1400H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Royal Sovereign RSC-1400H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Royal Sovereign RSC-1400H you will learn all the available features of the product, as well as information on its operation. The information that you get Royal Sovereign RSC-1400H will certainly help you make a decision on the purchase.
If you already are a holder of Royal Sovereign RSC-1400H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Royal Sovereign RSC-1400H.
However, one of the most important roles played by the user manual is to help in solving problems with Royal Sovereign RSC-1400H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Royal Sovereign RSC-1400H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
