Instruction/ maintenance manual of the product NB-1900N Royal Sovereign
Go to page of 14
OWNER'S MANUAL LAMINA T OR Model No. NB-1900N Royal Sovereign International Inc. Read all instructions carefully before use. For any customer support needs, please choose the « Customer Support » tab on www .
T ABLE OF CONTENTS TOPIC P AGE INTRODUCTION MAJOR P ARTS CHARACTERISTICS OF NB-1900N SAFETY PRECAUTIONS SET UP CONTROL P ANEL SETTINGS HOT LAMINA TING COLD LAMINA TING COLOR FOIL LAMINA TING MOUNTING .
INTRODUCTION MAJOR P ARTS CHARACTERISTICS NB-1900N Thank you for purchasing a Royal Sovereign Laminator . T o insure high quality lamination, please read this instroduction manual thoroughly . For additional product support or factory-direct ordering information.
NB-1900N 4 Failure to comply with any of the following safety procedures could result in serious injury . Keep this information for future reference. 1.T o prevent the possibility of fire or injury , do not allow articles of clothing (neckties, scarves, or paperclips etc.
Place laminator on a sturdy , flat work surface. Allow ample clearence behind laminator for laminated document or photograph to exit completely without bending. Connect laminator to an electrical outlet that matches laminator's rated voltage and power requirements.
COLD 1. Press power button to turn laminator on or off. 2. When you press power button, "FUNC 2" LED is blinking. At this time, function buttons become available. 3. T o choose film thickness, press or and you will see the LED read-out. 4. For cold laminating, press then green LED will light up.
1. Press the power button. 2. Choose setting by or 3. When red LED stops blinking and buzzer rings, you're ready to laminate. (It takes 4~5 minutes depending on setting function.) 4. Put document to be laminated, into a laminating pouch. Leave a minimum border of about 3mm(1/8"), to provide a proper edge seal.
COLD 1. Press the power button to turn laminator on. 2. Press 3. It is ready when green LED blinking stops and buzzer rings. 4. Insert document into Royal Sovereign cold laminating pouch as follows. NB-1900N 8 COLD LAMINA TING If it has recently been used for hot lamination, allow the rollers to be cooled down about 20~30 minutes.
Y our laminator has ability to add color by using color foil to documents copied or printed by laser printer using toner . 1. Press the power button to turn laminator on. 2. Find FOIL setting, using 3. Machine is ready when red LED stops blinking and the buzzer rings.
**Y ou can laminate photographs or pictures on a mounting board, less than 2mm (1/12") thick without any tension adjustment.** 1. Press the power button to turn the machine on. 2. Set FOIL setting with 3. When the LED light stops blinking and buzzer rings, the laminator is ready .
Be careful not to allow to damage temperature sensor , as damaged sensor could cause serious harm. 1) If film adhesive apears on the laminated pouch surface, Insert a sheet of clean, thick paper (about 0.5mm(1/50") thickness) into the machine 2~3 times on "FUNC 4" setting.
1. Be sure that neckties, necklaces, long hair and loose clothing are kept away while the laminator is in operation. 2. Prevent children from accessing the machine. 3. Place the machine on a sturdy , flat work surface to prevent damage. 4. Make certain that the machine is connected to an adequate power source.
NB-1900N 13 SPECIFICA TIONS NB-1900N 680x225x127mm (26.8"x10"x5" ) 445mm (17.5") 2mm (1/12") 75~125(micron) Four Ro ller (no ca rrier) 4~5 min Hot roller 8 SETTINGS DC FAN AC motor 520mm (20.5") per min. 11Kg (24 lbs.) AC 100V 50/60Hz, AC 120V 60Hz , AC 220-240V 50/60Hz 1000 W DESCRIPTION Dimensions(w x d x h) Max.
www .royalsovereign.com RS Holland B.V . Industrieweg 6K, 4104AR, Culemborg, The Netherlands TEL : +31 (0)345 473 097 FAX : +31 (0)345 519 811 E-mail : rseu@royalsovereign.com RS International Australia PTY . L TD. 30 Prime Drive, Seven Hills, NSW 2147, Australia TEL : +61) 2-9674-2127 F AX : +61) 2-9674-2027 E-mail : salesaust@royalsovereign.
An important point after buying a device Royal Sovereign NB-1900N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Royal Sovereign NB-1900N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Royal Sovereign NB-1900N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Royal Sovereign NB-1900N you will learn all the available features of the product, as well as information on its operation. The information that you get Royal Sovereign NB-1900N will certainly help you make a decision on the purchase.
If you already are a holder of Royal Sovereign NB-1900N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Royal Sovereign NB-1900N.
However, one of the most important roles played by the user manual is to help in solving problems with Royal Sovereign NB-1900N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Royal Sovereign NB-1900N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
