Instruction/ maintenance manual of the product IM-100 Audiovox
Go to page of 2
.. 5. Pre-wire radio. Slide radio into din sleeve until it locks into place. Note: Use either rear bushing or perforated strap to secure rear of radio. RADIO REMOVAL (IF NECESSARY) 1. Unsnap trimring on face of radio. 2. Insert removal tool in slotted holes on sides of radio until bottomed.
screws included with radio (see fig. 2) CAUTION: Do not use longer screws or damage to Internal parts of radio may occur 5. Re-Install radio / bracket assembly after wiring radio. 6. Replace dash panel. RADIO REMOVAL (IF NECESSARY) 1. Reverse installation procedure.
An important point after buying a device Audiovox IM-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox IM-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox IM-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox IM-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox IM-100 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox IM-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox IM-100.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox IM-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox IM-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center