Instruction/ maintenance manual of the product RDEE-11001 Rosewill
Go to page of 10
User Manual 3.5" SA T A to USB 3.0 & eSA T A Exter nal Enclosure RDEE-11001.
user manual 3.5" SA TA to USB 3.0 & eSA TA External Enclosure Enclosure Figure Description Front View Rear View A B C D E F G A B C D E F G Ventilation design Cover Buckle Fan Control Knob Power Switch Power Jack USB3.
user manual 3.5" SA TA to USB 3.0 & eSA TA External Enclosure Hard Drive Installation Guide Please follow the instructions to make sure your Hard Drive is properly installed into the External Enclosure Push the cover “Buckle” inwardly to lift plastic cover up.
user manual 3.5" SA TA to USB 3.0 & eSA TA External Enclosure Pull out the HDD plastic tray. STEP2 Place 3.5” SATA HDD into the plastic tray and screw the HDD on it.
user manual 3.5" SA TA to USB 3.0 & eSA TA External Enclosure Slide the HDD into the case and push HDD inwardly until SATA connector well connected.
user manual 3.5" SA TA to USB 3.0 & eSA TA External Enclosure Hard Drive Formatting Guide * * You may format your Hard Drive by using the USB connection. Please make sure your External Enclosure is turned on and connected to the PC before formatting the Hard Drive.
user manual 3.5" SA TA to USB 3.0 & eSA TA External Enclosure The “New Partition Wizard” will appear. Please follow the "New Partition Wizard" step by step to complete the Hard Drive formatting procedure.
user manual 3.5" SA TA to USB 3.0 & eSA TA External Enclosure NOTICE Question ： Does this SATA enclosure support hot swap? Answer ： Yes, but it depends on the motherboard you have. 1. If your motherboard has an eSATA port in the Back I/O Connectors Panel as shown in picture # 1 .
user manual 3.5" SA TA to USB 3.0 & eSA TA External Enclosure Thank you for purchasing a High-Quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product. If you have any question while using our products, please visit our website : www.
www.rosewill.com.
An important point after buying a device Rosewill RDEE-11001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rosewill RDEE-11001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rosewill RDEE-11001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rosewill RDEE-11001 you will learn all the available features of the product, as well as information on its operation. The information that you get Rosewill RDEE-11001 will certainly help you make a decision on the purchase.
If you already are a holder of Rosewill RDEE-11001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rosewill RDEE-11001.
However, one of the most important roles played by the user manual is to help in solving problems with Rosewill RDEE-11001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rosewill RDEE-11001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
