Instruction/ maintenance manual of the product GMRS1100-2CH Audiovox
Go to page of 24
General Mobile Radio Service (GMRS) General Mobile Radio Service (GMRS) General Mobile Radio Service (GMRS) General Mobile Radio Service (GMRS) General Mobile Radio Service (GMRS) Model Model Model Mo.
NEVER A TTEMPT TO CHARGE ALKALINE OR DRY CELL BA TTERIES, AS BA TTERIES MA Y BURST CAUSING PERSONAL INJURY AND DAMAGE TO THE PRODUCT . WHEN RECHARGING NICKEL MET AL HYDRIDE (Ni- MH) BA TTERIES WITH THE SUPPLIED AUDIOVOX CHARGER AND WALL ADAPTER, USE ONL Y AUDIOVOX-APPROVED RECHARGEABLE BA TTER- IES.
3 1. Battery Cover 2. Monitor/Function Confirmation Button 3. Detachable Carry Clip 4. Push-T o-T alk (PTT) and Func- tion Confirmation Button 5. Antenna 6. External Speaker (SPK), Micro- phone (MIC)/CHG Jacks 7. Built-in Speaker 8. Liquid Crystal Display (LCD) Model GMRS1 100-2CH (FCC License Required) 9.
4 Model GMRS 1 100-2CH DISPLA Y 1. Beep T one Indicator: Icon appears when beep button confirmation tone is selected; icon disappears when tone is off. 2. Key Lock Indicator: Icon appears when the keypad is locked. This function disables keys such as channel up/down and Function (F).
5 1 1. Roger Beep T one Indicator: This icon appears when the Roger Beep tone is on, and disapppears when the tone is not in use. 12 .Small Segment Display: Indicates the CTCSS tone code (1-38) function is active for the main channel in use. 13. Dual Watch Mode Indicator: Icon appears when dual watch mode is active.
6 2 . Slide the cover down and then lift cover at bottom to open.Remove cover . 3. Insert four AAA batteries (positive (+) end toward the top begining at left side and alternating positive terminals as shown). 1 . Using thumb, press down on battery cover at arrow and slide cover down to open.
7 The following guidelines will improve performance and provide longer operating times for the GMRS1 100-2CH: 1. Do not mix old and new batteries. 2. The use of alkaline-type batteries is recommended to provide the longest operating time. 3 . Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
GMRS1 100-2CH OPERA TIONAL MODES 8 FUNCTION (F) BUTTON BUTTON BEEP DUAL W A TCH VOX SELECT POWER SELECT CTCSS SELECT CHANNEL SELECT CALL SELECT NOTE: T o differentiate between operating modes, look for HI or LO indication below the battery power level indicator when in GMRS mode.
9 volume. The display will indicate the current volume level ( U L ) followed by the number ( 0-7 ). As volume is increased upward, the beep sound (if enabled) also increases, and vice-versa. When the minimum and maximum volume settings are reached, a unique tone will sound.
10 The PTT Button can also be used as a two-way call ringer . Pressing the button twice quickly will call another party on the same channel. The transmit LED will light red for approximately 3 seconds and then go out. Up Channel/V olume Button (16) In the standby mode, pressing this button will increment the listening volume.
11 Operating Modes and F ea tur es GRMS/FRS Operation: - From GMRS/FRS standby mode, press and hold the PWR button for 2 seconds to turn on power . - Press the Function (F) button so the Channel number flashes. - Select the desired channel with the Up (16) and Down (13) Buttons.
12 T o change the channel: - From GMRS/FRS standby mode, press the Function (F) button (14) until the channel number flashes. - Press the Up Button (16) briefly to move to the next higher main chan- nel number . - Press the Down Button (13) briefly to move to the next lower main channel number .
13 T ransmit Power Selection Mode (GMRS Channels Only) This feature permits selection of the transmitting power level to high or low . Using low power , the unit will have a lower transmit range, but battery life will be increased.
14 - Momentarily press the PTT or PWR button to confirm the VOX selection. - The VOX icon will appear steady on the LCD display . VOX can be turned off by selecting oF as the setting. Dual Watch Mode This feature allows you to monitor two channels at the same time.
15 Button Beep (Key T one) This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Monitor (M) Button, Up/Down Buttons, Func- tion Button, SCAN Button or the EMG Button.
16 - Press the Up or Down Button to preview and hear the 5 available call melodies. - Press the PTT or PWR button momentarily to confirm selection. Refer to the PTT button (4) to transmit ring signal. Channel Scan Operation This feature allows you to monitor all channels automatically for valid signals.
17 Key Lock Selection Mode This feature prevents accidental channel change to the preferred settings of the unit. The Key Lock function temporarily disables the Up, Down and Function (F) Buttons.
18 T o turn the Emergency Channel feature on or off: - Press and release the EMG Button; EMG appears on the display together with a Channel 20 indication. - When the transceiver is set to Emergency Channel 20, The trans- ceiver transmits and receives on a special frequency (CH20: 462.
Warning • Do not operate the transceiver unless you are licensed to do so. • Remove the batteries from the transceiver if it is not expected to be used for long periods. This will eliminate the possibility of chemicals leaking from the batteries and corroding the transceiver .
T roubleshooting 20 Weak or no Weak batteries Charge or replace batteries signal received Channel and privacy Adjust the transceiver’s code not set the same settings to match those as target transce.
General General General General General Frequency Range: Channels 1 through 7 are shared with FRS radios. Refer to frequency chart on next page. Channels 8 through 14 are FRS only . Refer to frequency chart on next page. Channels 15 through 22 are GMRS only .
22 NOTE: Channels 1 through 7 are shared with FRS radios. Channels 8 through 14 are FRS only . Channels 15 through 22 are GMRS only . This transceiver complies with FCC regulations for use in the United States of America. Use in other countries may be prohibited or restricted by local regulation.
Continuous T one Coded Squelch System T one Frequencies (in Hz) CTCSS Freq. Hz CTCSS Freq. Hz 1 67.0 2 0 131.8 2 71.9 2 1 136.5 3 74.4 2 2 141.3 4 77.0 2 3 146.2 5 79.7 2 4 151.4 6 82.5 2 5 156.7 7 85.4 2 6 162.2 8 88.5 2 7 167.9 9 91.5 2 8 173.8 1 0 94.
90 DAY LIMITED WARRANTY AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 1-800-290-6650 128-5385A Applies to Audiovox Family Radio and General Mobile Service Products.
An important point after buying a device Audiovox GMRS1100-2CH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox GMRS1100-2CH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox GMRS1100-2CH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox GMRS1100-2CH you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox GMRS1100-2CH will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox GMRS1100-2CH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox GMRS1100-2CH.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox GMRS1100-2CH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox GMRS1100-2CH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
