Instruction/ maintenance manual of the product SSM-151 Roland
Go to page of 8
OWNER’S MANUAL Thank you, and congratulations on your choice of the SST/SSW/SSM Speaker System. Roland’s SST/SSW/SSM speaker systems, designed, developed, and manufactured in the U.S.A., offer the ideal combination of excellent sound, superb design, and outstanding value.
2 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 002a • Do not open or perform any internal modifica- tions on the unit.
3 101a • The unit should be located so that its location or position does not interfere with its proper venti- lation. .......................................................................................................... 104 • Try to prevent cords and cables from becoming entangled.
4 1. Before you make connections, make sure that the power of all equipment is turned off. Also make sure that the volume controls on your amplifier and mixer are turned to the minimum position. 2. Use speaker cables to connect the output terminals of the amplifier to the inputs of the speakers.
5 The SSW-351 contains a built-in crossover network. There are several ways in which an additional speaker can be connected to the SSW-351. Since the HIGH FREQ OUTPUT is routed through the internal crossover network, a signal from which the low range has been cut will be sent to the connected speaker.
6 When used as a stage floor monitor, the SSM-151 can be set at two different floor angles. When setting up monitor speakers, be sure to observe the following points in order to prevent the speakers f.
TWEETER WOOFER 3.3uF 4.7ohm 1.3mH 2.6mH 10uF NL4MP 1+ 1 - DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP . IN CALIFORNIA, USA P ARALLEL INPUTS FULL RANGE TWEETER WOOFER 2.2uF 2.7ohm 0.64mH 18ohm 0.64mH 2.2uF NL4MP 1 - 1+ DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP .
3*RAD SST-151_e.book 8 ページ ２００３年２月２４日 月曜日 午後１時３６分.
An important point after buying a device Roland SSM-151 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roland SSM-151 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roland SSM-151 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roland SSM-151 you will learn all the available features of the product, as well as information on its operation. The information that you get Roland SSM-151 will certainly help you make a decision on the purchase.
If you already are a holder of Roland SSM-151, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roland SSM-151.
However, one of the most important roles played by the user manual is to help in solving problems with Roland SSM-151. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roland SSM-151 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
