Instruction/ maintenance manual of the product RSM-90 Roland
Go to page of 8
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of June 1, 2000 (Roland) ARGENTINA Instrumentos Musicales S.A. Florida 656 2nd Floor Office Number 206A Buenos Aires ARGENTINA, CP1005 TEL: (54-11) 4- 393-6057 BRAZIL Roland Brasil Ltda.
2 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 002a • Do not open or perform any internal modifica- tions on the unit.
3 Important Notes 104 • Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children. ..................................................................................
4 Making the Connections Connect the output connectors of your power amp to the RSM-90 input connectors with speaker cable. Before connecting the speakers, confirm that the power is off on all connected devices. Also check to make sure that the power amp and mixer volume levels are turned down completely.
5 Making the Connections Bi-Wiring Connections Remove the short bar horizontally, then connect the power amp to each speaker using two sets of cables. fig.2 Bi-wiring is a method of connecting the power amp to the speakers using separate sets of speaker cables for the low- and high-frequency portions.
6 Appendices Specification * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
2 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 002a • Do not open or perform any internal modifica- tions on the unit.
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of June 1, 2000 (Roland) ARGENTINA Instrumentos Musicales S.A. Florida 656 2nd Floor Office Number 206A Buenos Aires ARGENTINA, CP1005 TEL: (54-11) 4- 393-6057 BRAZIL Roland Brasil Ltda.
An important point after buying a device Roland RSM-90 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roland RSM-90 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roland RSM-90 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roland RSM-90 you will learn all the available features of the product, as well as information on its operation. The information that you get Roland RSM-90 will certainly help you make a decision on the purchase.
If you already are a holder of Roland RSM-90, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roland RSM-90.
However, one of the most important roles played by the user manual is to help in solving problems with Roland RSM-90. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roland RSM-90 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center