Instruction/ maintenance manual of the product M PX -60 Roland
Go to page of 8
M o d el M P X - Model MPX-60 Operation Guide.
1 METAZA Mechanical Operation How METAZA marks dots on metal METAZA impacts a conical diamond-tipped stylus onto a metallic surface to make a depression. The areas with depressions look lighter than where there are none. These differences form an image.
2 At the upper range the blue line, the contrast between darker and lighter parts of the image becomes stronger and the entire image will be lighter (whitish). The blue curve shows the relationship of impact strength and the dark (light) point in the image.
The adhesive sheet is placed front side back on the work table. The adhesive sheet is not aligned with the upper right corner of the work table. The workpiece is not in the center of the work table. 3 For Best Imprinting Results - Part 1 Yes No Loading a material METAZA is a precision instrument.
Press down gently (700 – 1000 gram force) level. Excessive force Base tilts and cannot hold the workpiece level. Excessive force causes the material to bend, shift, etc. Appropriate force Base holds the workpiece level. 4 Leveling the material Press the material down with the Leveler very GENTLY.
5 For Best Imprinting Results - Part 2 Adjusting the image To obtain the best imprinting quality, adjust gamma, brightnesss and contrast while looking at the on-screen preview. The on-screen preview displays an image for reference purposes only. The image in the preview and your actual results may vary.
MIN 610, 620, 630. . . . MAX 950 MIN600 MAX950 MIN 610, 620, 630. . . . MAX 960, 970, 980. . . . MIN600 MAX950 6 Customizing Impact Values Harder or softer materials You can customize the impact values and register an item as a new material when the material is harder or softer than the default values of Dr.
Imprinting with the METAZA Driver when using commercially available Drawing/Photo software: *Imprinting results may vary depending on the application software used.
An important point after buying a device Roland M PX -60 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roland M PX -60 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roland M PX -60 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roland M PX -60 you will learn all the available features of the product, as well as information on its operation. The information that you get Roland M PX -60 will certainly help you make a decision on the purchase.
If you already are a holder of Roland M PX -60, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roland M PX -60.
However, one of the most important roles played by the user manual is to help in solving problems with Roland M PX -60. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roland M PX -60 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
