Instruction/ maintenance manual of the product CUBE-100 Roland
Go to page of 12
Owner’s Manual Thank you, and congratulations on your choice of the Roland CUBE-100 BASS Amplifier. These sections provide important information concerning the proper operation of the unit.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instruc- tions below, and the Owner’s Manual. .............................................................................................................................
4 101a • The unit should be located so that its location or position does not interfere with its proper ventilation. ....................................................................................................................................
5 Panel Descriptions fig.01 1. INPUT Jack Connect your bass guitar here. 2. PEAK Indicator This lights up when the signals are distorted in the input section. If this lights frequently, it indicates that the input signal is in excess of the optimal level.
6 Panel Descriptions 13 . EFX (Effects) Knob Turn this knob to chorus, flanger, or T-wah to select the corresponding effect. Turn the knob to adjust the amount of effect applied. The ON indicator lights up when EFX is turned on, and goes out when EFX is turned off.
7 Panel Descriptions TYPE switch ( ➅ ) COSM amp type list * All product names mentioned in this document are trademarks or registered trademarks of their respective owners, and are not related to Roland Corporation. In this manual, these names are used as appropriate ways to indicate sounds that are simulated using COSM technology.
8 Panel Descriptions Rear Panel 1. FOOT SW (Foot Switch) Jack Foot switches (the optional BOSS FS-5U) are connected here. * Set the polarity switch as shown in figure. EFX: Switches on and off of EFX. DELAY/REVERB: Switches on and off of DELAY/REVERB.
9 Main Specifications Rated Power Output 100 W Nominal Input Level (1kHz) INPUT: -10 dBu / 1 M Ω Speaker 30 cm (12 inches) + Tweeter (Coaxial, 2-way) Controls POWER Switch <INPUT> PAD Switch <COMPRESSION> COMPRESSION Knob <COSM AMPLIFIER> SHAPE Switch, TYPE Knob (SUPER FLAT, FLIP TOP, B MAN, T.
10 Sample Settings ALL ROUND (SUPER FLAT) An original amp featuring a wide-range frequency response. This amp type enables clear reproduction of your instrument’s sound. This also makes it perfect when connecting bass modeling processors or using sound modules like bass synth.
11 Sample Settings FUNK WAH (T.E) This setting employs the T-WAH feature for a funky sound that responds to the bass touch. The wah effect becomes even more prominent with the T.E or SESSION amp types, which feature response up to the high- frequency range.
SD000521 2DH This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
An important point after buying a device Roland CUBE-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roland CUBE-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roland CUBE-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roland CUBE-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Roland CUBE-100 will certainly help you make a decision on the purchase.
If you already are a holder of Roland CUBE-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roland CUBE-100.
However, one of the most important roles played by the user manual is to help in solving problems with Roland CUBE-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roland CUBE-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
