Instruction/ maintenance manual of the product FPE2608DV Audiovox
Go to page of 31
26” HD FLA T P ANEL LCD TV WITH BUIL T -IN DVD PLA YER PL V31260CS10 / A UDIOVO X I/B 811-312691W070 <English> SIZE : 148 X 210MM MA TERIAL : 80g WOODSFREE P APER OWNER'S MANUAL FPE2608DV FOR ASSIST ANCE CALL CUSTOMER SER VICE A T 1-800-645-4994 OR VISIT US A T WWW .
E - 1 SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
E - 2 IMPORT ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with a dry cloth. 7) Do not block any ventilation openings.
E - 3 CONTENTS SAFETY PRECAUTIONS ................................ 1 IMPORT ANT SAFETY INSTRUCTIONS ............................................................................. 2 MAINTENANCE ................................................ 2 CONTENTS .
E - 4 DISC FORMA TS NOTES ON COPYRIGHT It is forbidden by law to copy , broadcast, show, broadcast on cable, play in public or rent copyrighted material without permission. Apparatus Claims of U.S. Patent Nos. 4,907,093; 5,315,448 and 6,516,132 licensed for limited viewing uses only .
E - 5 ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ................................................................................................. x 1 GETTING ST ARTED USING THE REMOTE CONTROL • Point the remote control at the remote sensor located on the unit.
E - 6 CONTROL REFERENCE GUIDE REMOTE CONTROL 1. ST ANDBY / ON button Press to turn ON the unit or put it in ST ANDBY (OFF) mode. 2. TV button Press to switch to TV mode. DVD button Press to switch to DVD mode. A V button Press to switch to source connected to A V1 / A V2 (composite) input.
E - 7 CONTROL REFERENCE GUIDE REMOTE CONTROL 1 7 . FUNCTION button Press to switch between TV / A V 1 / A V 2 / YUV in / DVD / HDMI 1 / HDMI 2 / PC in. 18 . LAST CH button Press to switch repeatedly between the last two channels displayed. 19. MUTE button Press to turn off the sound.
E - 8 CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 1. STD.BY / ON button Turns the unit on and off. 2. MENU button Enters the on-screen TV menu. 3. FUNCTION button Selects TV / A V 1 / A V 2 / YUV in / DVD / HDMI 1 / HDMI 2 / PC in. 4. CH buttons Confirms selections on the TV menu screen and changes the TV channels.
E - 9 CONTROL REFERENCE GUIDE REAR VIEW 12. AUDIO IN (Left/Right) jacks (A V IN 2) 13. VIDEO IN jack (A V IN 2) 14. VIDEO IN jack (A V IN 1) 15. Headphones jack 16 . TV ANTENNA terminal 17. AUDIO IN (Lef t / Right) jacks (A V IN 1) 18. S-VIDEO IN jack (A V IN 1) 19.
E - 10 CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SA TELLITE T o view television channels correctly , a signal must be received from one of the following sources: - An indoor or outdoor aerial ante.
E - 11 CONNECTIONS CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT T o connect A/V devices such as a VCR, video game system or camcorder: Connecting to a VCR / Video Game System / C.
E - 12 CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input.
E - 13 CONNECTIONS CONNECTING HDMI T o HDMI OUT jack HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV , set-top boxes and other digit al AV devices.
E - 14 CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet. • Press the STD. BY / ON button on the left side of the unit or use the remote control to turn on the unit. NOTES • TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG TO WIDE SLOT OF W ALL OUTLET , THEN FULL Y INSERT .
E - 15 INST ALLA TION REMOVING THE BASE ST AND WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object s, or anything that could scratch or damage the LCD display , come in contact with it.
E - 16 SOUND SYSTEM DOLBY DIGIT AL (FOR DVD) Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically recognizes DVDs that have been recorded with Dolby Digital. Not all Dolby Digital sources are recorded with 6 channels.
E - 17 TV SETUP VIDEO MENU 1. Press the MENU button. 2. Press the ENTER or button to select Video . 3. Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, Tint, Sharpness or Color T emperature).
E - 18 AUDIO MENU 1. Press the MENU button. 2. Use the or button to select Audio, then press the ENTER or button to go into the Audio settings. 3. Use the or button to select the options (Balance, Bass, T reble, V irtual Surround, Reverb or Sound mode) .
E - 19 TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV . Press the ENTER or button to go into the TV settings. 3. Use the or button to select the options ( T uner Mode, Auto Scan, Auto Scan Add CH, Channel Skip, MTS or Audio Language).
E - 20 SETUP MENU 1. Press the MENU button. 2. Use the or button to select Setup . Press the ENTER or button to go into the Setup settings. 3. Use the or button to select the options (OSD Language, Time Setup, Caption or Restore setting).
E - 21 Restore Setting If you reset the TV to the factory settings, all your present settings on Video & Audio will be erased and replaced by the factory’ s default settings. However, picture settings in PC mode and Parent al settings will not be erased.
E - 22 Rating Enable : Select On to edit the following parental items. Select Off to disable parental control. Open V -Chip : Reads the ratings from A TSC TV programs if there is rating information broadcasted, and denies the channel when its rating is higher than the ratings you pre-set.
E - 23 PLA YING A DISC This owner’s manual explains the basic instructions of this unit. Some DVDs are produced with limited operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features.
E - 24 PLA YING A DISC ANGLE SELECTION (DVD) Some DVDs contain scenes that have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number current angles available.
E - 25 LOCA TING A SPECIFIC TITLE (DVD) If a DVD contains title numbers, you can locate a specific title by directly selecting its title number . 1. In STOP mode, press the GOTO button. 2. Press the or button to highlight a specific field and press the corresponding number button(s) for the title you want.
E - 26 REPEA T PLA YBACK Repeating a Specific Section (DVD) (CD) Y ou can play a specific section repeatedly . 1. While the disc is playing, press the A-B button at the beginning of the section ( is displayed) you want to play repeatedly . 2. Press the A-B button again at the end of the section ( is displayed) you want to play repeatedly .
E - 27 DVD / CD PROGRAMMABLE PLA YBACK PROGRAMMABLE MEMORY The two types of programmed playback provided by this unit are title/chapter programmed playback and track programmed playback.
E - 28 CUSTOMIZING THE FUNCTION SETTINGS SYSTEM SETUP 1. Press the SETUP button in STOP mode. 2. Use the button to select LANGUAGE SETUP , then press the or button repeatedly until SYSTEM SETUP appears. 3. Use the or button to select the option ( TV TYPE or DEF AUL T ), then press the button.
E - 29 TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) • The region number of the disc does not match the region number of this unit. The picture is not clear. No picture. • Make sure that you select DVD mode. • The system is in pause mode. Press the PLA Y button to return to normal PLA Y mode.
Unit : INCH 26 1/4 18 3/4 7 7/8 19 3/4 22 5/8 8 1/4 3 7/8 8 5/8 5 1/8 Printed in China 81 1-312691W070 FPE2608DV_ib_eng_17-30.pmd 1/15/2008, 12:43 PM 30.
An important point after buying a device Audiovox FPE2608DV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox FPE2608DV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox FPE2608DV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox FPE2608DV you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox FPE2608DV will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox FPE2608DV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox FPE2608DV.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox FPE2608DV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox FPE2608DV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
