Instruction/ maintenance manual of the product Rogue Sixty Six Rogue Audio
Go to page of 12
THE ROGUE AUDIO MISSION ......... At Rogue Audio we design and m anufacture vacuum tube amplifie rs. There is fierce competition in this market and we will on ly survive by delivering a superior product and s uperior service - we have the engineering and m anagerial talent to do so.
TABLE OF CONTENTS 1) Introduction 1 2) Setting up your preamplifier 1 3) Operating your preamplifier 4 4) Maintenance 5 5) If there’s a problem 7 6) Specifications 8 7) Warranty 9 Limited Warranty Warranty Period This product has been manufactured under the highest standards of quality and workmanship.
SPECIFICATIONS frequency response 10Hz - 100kHz + 1dB THD < 0.1% gain - line stage 23 dB gain - phono stage 40 dB rated output 1.5 V RMS maxi mum output 50V RMS RIAA accuracy + 0.
2) Connecting the power supply - Carefully plug the black six pin connector coming from the power supply into the rear of the preamplifier. See Figure 1. Connect the IEC end of the detachable power cord to the power supply , and plug the opposite end into the wall outlet.
4) Connections to other components - Connections are shown in Figure 1. The input connections for source material (phonograph, CD player, tuner, tape recorder) are made via RCA auxiliary jacks are also available for line level sources (approximately 1 volt).
OPERATING YOUR PREAMPLIFIER 1) Delays- Note that the Rogue Sixty-six is equipped with a slow turn-on feature that protects other equipment from dangerous transients at turn-on as well as significantly prolonging tube life.
OPERATING YOUR PREAMPLIFIER 1) Delays- Note that the Rogue Sixty-six is equipped with a slow turn-on feature that protects other equipment from dangerous transients at turn-on as well as significantly prolonging tube life.
4) Connections to other components - Connections are shown in Figure 1. The input connections for source material (phonograph, CD player, tuner, tape recorder) are made via RCA auxiliary jacks are also available for line level sources (approximately 1 volt).
2) Connecting the power supply - Carefully plug the black six pin connector coming from the power supply into the rear of the preamplifier. See Figure 1. Connect the IEC end of the detachable power cord to the power supply , and plug the opposite end into the wall outlet.
SPECIFICATIONS frequency response 10Hz - 100kHz + 1dB THD < 0.1% gain - line stage 23 dB gain - phono stage 40 dB rated output 1.5 V RMS maxi mum output 50V RMS RIAA accuracy + 0.
TABLE OF CONTENTS 1) Introduction 1 2) Setting up your preamplifier 1 3) Operating your preamplifier 4 4) Maintenance 5 5) If there’s a problem 7 6) Specifications 8 7) Warranty 9 Limited Warranty Warranty Period This product has been manufactured under the highest standards of quality and workmanship.
THE ROGUE AUDIO MISSION ......... At Rogue Audio we design and m anufacture vacuum tube amplifie rs. There is fierce competition in this market and we will on ly survive by delivering a superior product and s uperior service - we have the engineering and m anagerial talent to do so.
An important point after buying a device Rogue Audio Rogue Sixty Six (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rogue Audio Rogue Sixty Six yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rogue Audio Rogue Sixty Six - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rogue Audio Rogue Sixty Six you will learn all the available features of the product, as well as information on its operation. The information that you get Rogue Audio Rogue Sixty Six will certainly help you make a decision on the purchase.
If you already are a holder of Rogue Audio Rogue Sixty Six, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rogue Audio Rogue Sixty Six.
However, one of the most important roles played by the user manual is to help in solving problems with Rogue Audio Rogue Sixty Six. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rogue Audio Rogue Sixty Six along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
