Instruction/ maintenance manual of the product R9969 Roberts Radio
Go to page of 28
R9969 PLL Synthesised World Radio Please read this manual before use ROBER TS Sound for Generations.
2 Contents ............................................................................ 2 Controls .......................................................................... 3- 6 Installing the batteries ...............................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 3 1 8 10 9 11 12 CONTROLS Controls - Front 1. Light 2. Tune/SSB LED 3. 1 to 9 Numerical buttons 4. Display 5. Band selection 6. Memo AM/PM 7. Mode 8. On/Off Sleep 9.
4 Controls Right side 20. SSB Fine Tuning 21. SSB On/Off 22. Tone (low/high) 23. Volume Left side 24. SW External Antenna 25. FM/SW DX./Local 26. FM St.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 5 30 29 Controls Top Bottom 29 . Antenna 30. Reset button.
6 Controls Back 31. Map of world time zones 32. Frequency scale 33. Battery compartment 33 32 31.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 7 Installing the batteries 4 x 1.5V, LR6 (AA size) type batteries are required. 1. Open the battery compartment on the back of your receiver by pressing the marking and opening the lid.
Switching on and setting the clock Before setting the clock make sure that the local time zone is known. There are 24 time zones based on a standard time zone called the UTC (Universal Time Co-ordinated), previously known as GMT (Greenwich Mean Time), as shown in the diagram on the back of the receiver.
Setting local time 2 1. Press the SW Page Clock 1/2 button . The display flashes for local time '2' . 2. To set the display to local time '2' press the Freq./Clock button . 3. Press down and hold the Freq./Clock button until the display indicates the time can be set.
10 Setting and storing radio stations 1. Switch on the radio by pressing the On/Off Sleep button . 2. Press the Band button to select the required waveband (FM, SW, MW or LW). There are various ways to set radio stations and store them at preset positions.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 11 Tuning radio stations manually (1) 1. Tune in to the desired station by turning the Fine tuning dial .
12 Saving radio stations at preset positions You can store up to 45 radio stations; 18 on two memory levels for short wave frequencies, and nine each on FM, MW and LW frequencies. 1. Select the frequency band and the radio station. 2. Press the Memo AM/PM button .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 13 Automatic station search This function allows an automatic search and store of nine stations in each of the FM, MW and LW bands (not SW).
14 1 Calling up stored radio stations 1. Select the station using the numerical buttons '1...0' for the preset number. 2. To call up preset numbers 10 to 18 in the SW band, press the SW Page Clock 1/2 button to switch to the second memory level.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 15 Changing preset positions 1. Enter the preset station you want to change using the numerical buttons '1...0'. 2. Press the Memo AM/PM button and the selected preset position flashes.
16 Listening with Headphones 1. A Headphone Socket (3.5mm) located on left side of the receiver is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker. Switching between stereo and mono reception FM stereo reception is only available with headphones.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 17 Special features of SW reception Short wave reception Your radio can receive signals in a number of frequency bands. It is easy to get used to tuning to stations in the FM, MW and LW bands, since they are always on the same frequencies.
18 SSB reception (for example for radio hams and shipping) Some short wave stations broadcast Morse code for shipping using continuous waves (CW). Voice signals, for example amateur radio, is normally broadcast on the single side band (SSB). 1. Select the SW waveband using the Band button.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 19 Alarm mode Displaying the alarm time 1. Press the appropriate Alarm button (signal tone or radio). The last setting will be displayed or the radio symbol will flash.
20 Alarm with radio station 1. Press the On/Off Sleep button to switch on the receiver. 2. Select the frequency band and the radio station. 3. Adjust the alarm volume using the Volume dial. 4. Press the Display button to switch the display to the clock.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 21 Cancelling the alarm for the day 1. Press the On/Off Sleep button while the alarm is sounding. The alarm (signal tone or radio) stops, but the alarm function remains activated for the next day at the set time.
22 Deactivating the sleep timer 1. To deactivate the sleep timer, press the On/Off Sleep button to switch off the radio. Additional functions Displaying local time 1 or 2 If two local times are set, local time '1' is normally displayed.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 23 Setting various function modes Using the Mode button and a two-digit code, which you enter using the.
24 Switching on the back lighting for the display 1. Press the Light button to switch on the display lighting for 7 seconds. 2. Press the Light button to switch off the display lighting. Disabling and enabling the buttons 1. To disable the buttons, move the Lock button to the red dot.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 25 Deleting all settings The receiver can be reset to its original state. All settings are lost when you do this. 1. Press the Reset button on the bottom of the device using a suitable implement such as a paper clip.
26 Specifications Power supply Battery operation 4 x 1.5V LR6 (AA size) Mains operation 6V (200 mA) mains adapter, DC Output 300 mW 10% THD Antennas Telescopic antenna FM and SW Ferrite rod antenna MW and LW Sockets DC socket Dia. 4.0 mm, 6V (200 mA) centre pin negative Headphone jack Dia.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 27 Guarantee This receiver is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1.
An important point after buying a device Roberts Radio R9969 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio R9969 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio R9969 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio R9969 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio R9969 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio R9969, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio R9969.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio R9969. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio R9969 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
