Instruction/ maintenance manual of the product R9944 Roberts Radio
Go to page of 12
Please read this manual before use ROBER TS Sound for Generations R9944 3 Band Mains Table Radio.
1 Contents Important Information .......................................................................................................... ..................................................... 1 Controls ..............................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls (Front) 1. Loudspeaker 2. Dial scale 3. Dial pointer 4.
3 Controls (Rear) 8. External FM antenna socket 9. External AM antenna terminals 10. Mains socket 11. External DC input socket 8 91 0 11 12 13 14 15 12.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Mains operation 1. Place your radio on a flat surface. 2. Plug the mains lead into the Mains socket located on the rear of your radio ensuring that the plug is pushed fully into the socket.
Operating your radio FM 1. Switch on your radio by rotating the Volume control until a click is heard. 2. Set the Waveband switch to the FM position. 3. Adjust the Volume control until a hissing sound is heard. 4. Rotate the Tuning control to select the desired station.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 1 2 4 4 Operating your radio AM (Medium and Long wave) 1. Switch on your radio by rotating the Volume control until a click is heard. 2. Set the Waveband switch to the MW or LW position.
7 Headphone, Auxiliary and Record sockets 1. The Headphone Socket (3.5mm) located on the rear of your radio is for use with either headphones or an earpiece.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Specifications Power Requirements Mains AC 230 volts, 50Hz only D C 12V DC @ 1Amp centre pin positive Frequency Coverage F M 87.
9 The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. Mains supply The R9944 will operate from a supply of AC 230 volts, 50Hz only. DO NOT cut off the mains plug from this equipment.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1.
An important point after buying a device Roberts Radio R9944 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio R9944 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio R9944 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio R9944 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio R9944 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio R9944, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio R9944.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio R9944. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio R9944 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
