Instruction/ maintenance manual of the product CR9986 Roberts
Go to page of 24
CR9986 Dual Alarm CD Clock Radio Please read this manual before use ROBERT S Sound for Generations CR9986 Rev 1.pmd 5/19/2005, 8:28 AM 1.
1 Contents .............................................................................. 1 Controls ........................................................................... 2-3 Switching on and setting the time ....................................
Controls 1. On/Off button 2. Dial scale with pointer 3. Alarm 1 indicator 4. Auto Dimmer 5. PM indicator 11. Random indicator 12. Repeat indicator 13. Programme indicator 14. On indicator 15. Sleep button 2 6. Sleep indicator 7. Time Set button 8. CD Display button 9.
3 Controls 25. Alarm 1 function switch 26. Alarm 2 function switch 27. Alarm Mode switch 28. Headphone socket 29. CD Door handle 30. Tuning control 31. Function switch 32. Volume control 33. Battery compartment (on underside) 25 26 27 28 29 30 31 32 33 CR9986 Rev 1.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) TIME SET Switching on and setting the time Before using your CD clock radio you must first set the correct time. 4 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on the wall socket.
TUNING ON/OFF 5 Listening to the Radio 1. Switch on your CD clock radio by pressing the On/Off button . The On indicator LED will light. 2. Slide the Function switch to the required waveband. 3. Tune in to the desired station by rotating the Tuning control .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up.
7 Inserting a CD 1. Press the On/Off button to switch on your CD clock radio. The On indicator will light. 2. Set the Function switch to CD. 3. To open the CD compartment, lift the CD door by the handle as shown. 4. Press the CD onto the spindle until it clicks into place.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Playing a CD 1. Press the Play/Pause button to start playback. The display will show the track number. After a short time the display will revert to showing time.
9 Selecting a track 1. Whilst the CD is playing, press either the F.skip or B.skip buttons to change to the desired track, the track number will show in the display. You can also skip tracks when the player is in stop mode. Skip to the desired track using the F.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 CD repeat mode 1. Whilst the CD is playing press the Repeat button once to repeat the current track. The Repeat indicator will flash. 2. Press the Repeat button again to repeat all tracks on the CD.
11 Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in Stop mode, press the Program button . The display will show ‘ P 01’ and the Program indicator will flash. Note: the display will revert to showing time after 10 seconds of inactivity.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 1 0FF · ON · ADJ · 12 Setting alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times.
Checking the Alarm Times 1. To check Alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will flash in the display. 2. Return the Alarm 1 function switch to the 'Off' position. The display will revert to showing time.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Setting the alarms to wake to buzzer 1. Set the alarm time as previously described. Set the Alarm mode switch to the 'Buzz' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position.
Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Alarm Mode switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indicator will light.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Setting the alarms to wake to CD 1. Set the alarm time as previously described. Set the Alarm Mode switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position.
17 Setting the alarm to wake to CD programme 1. Set the alarm to wake to CD as previously described. 2. Programme your favourite tracks as described earlier. 3. Press the Play/Pause button followed by the CD Stop button. 4. Press the On/Off button to switch off your CD clock radio, the On indicator will switch off.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Snooze control 1. The buzzer, CD or radio alarm can be silenced for 6 minutes by pressing the Snooze button. This sequence can be repeated during the 90 minute alarm period.
Headphones 1. A Headphone Socket (3.5mm) located on left side of the unit is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker. BUZZ · MUSIC · OPEN 1 0FF · ON · ADJ · 2 0FF · ON · ADJ · 19 Auto Dimmer 1.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 20 The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6LR61 (6F22, PP3) Frequency Coverage F M 87.
21 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 CR9986 Rev 1.pmd 5/19/2005, 8:28 AM 24.
An important point after buying a device Roberts CR9986 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts CR9986 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts CR9986 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts CR9986 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts CR9986 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts CR9986, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts CR9986.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts CR9986. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts CR9986 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
