Instruction/ maintenance manual of the product VR500CS-BT Roadmaster
Go to page of 22
.
W elcome! Dear Customer , CONGRA TULA TIONS. The VR500CS-BT MP3/CD Player with AM/FM Receiver , USB Port and SD Card Slot, Electr onic Anti-Shock (ESP) & Fold-down Detachable Face, when used as described, will give you years of dependable service in your car , truck, RV , or mini-van.
Precautions • Handle the disc by its edge to keep the disc clean. Do not touch the disc’ s surface. • Do not use a CD with paste or ink residue on it. • Do not use CDs with labels or stickers attached. The label may leave a sticky residue when it begins to peel.
• Disconnect negative battery terminal before starting installation. Consult the vehi- cle’ s owner’ s manual for proper instruction. • The unit is designed for a 12V olt DC negative gr ound operation system only . Before installing the unit, confirm that your vehicle is a 12V olt DC negative ground system.
Before Y ou Install Automotive audio equipment installations can be challenging at times, even to the most experienced of installation technicians. If you are not confident working with electrical wir.
Installtion 1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Screw (5 x 25mm) 5. Screw 6. Strap 7. Plain washer 2. Mounting Sleeve 3 . Scr ew 1 . Dashboar d Bend the tabs to secure the Mounting Sleeve in the dashboard.
DIN REAR-MOUNT (Method B) Installation using the screw holes on both sides of the unit. 1. Screw holes on the side of the unit. 2. Screws. Use either truss screws (5 x 8mm) or flush surface scr ews (4 x 8mm), depending on the shape of the screw holes in the bracket.
Installation 7 The VR500CS-BT has the ability to use two microphones. One micr ophone is built-in, the other is a remote micr ophone. Built-In Microphone The built-in microphone is located on the fr ont right side of the unit.
Wiring Connections Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requir es a tight connection to the vehicle’ s metal chassis.
Location Of The Controls 9 1 2 3 4 5 6 7 8 1. Answer/ Green Phone 2. V olume/SEL/Enter 3. Disc Slot 4. Liquid Crystal Display (LCD) 5. 0-9, #, & * Key Pad buttons 6. Random / No. 4 7. No.1 / T op 8. No.5 / Down 10 9. Intro/No. 2 10. Eject 11. No. 6 / UP 10 12.
Remote Control 1. Power On/Off 2. V olume Up 3. Select/Menu/Enter 4. V olume Down 5. Intro/No. 2 6. No.1/T op 7. No. 5/Down 10 8. No. 4/Random 9. No. 8/T A Control 10. No. 7/AF 11. No. 0/Stereo 12. Star Symbol/Scan 13. PHONE 14. Green Phone Icon 15. No.
Basic Operation 1. T uning the Unit On / Of f Press any Button to turn the unit on, the dis- play will show a message WELCOME to in- dicate it is ready for use. Press the POWER button for 2 seconds to turn the unit off. 2. Mode Selection Press the BAND Button to select Radio Mode.
Before Connecting T urn the VR500CS-BT ON, then turn your cell phone’ s Bluetooth Function ON. 1. Pairing 1. Press the “PHONE” button. 2. Press and hold the V olume Knob until you see “DISP OFF”, 3. Press the V olume Knob repeatedly to cycle through to “P AIRING”.
Bluetooth Connection 13 10. Recently Received Calls After connecting with cell phone; 1. Press the “PHONE” button. 2. Press and hold the V olume Knob until you see “OUT NUM”, then press the V olume Knob until the display shows “IN NUM”. 3.
Radio Operation 1. Choose Radio Band Press the BND•ID3 Button anytime to ac- cess the radio function. The unit comes with five bands - three FM (FM1, FM2, and FM3) and two AM (AM1 and AM2) Band selects. Each of the five bands can store up to six preset stations, for a to- tal of 30 preset memory stations.
Radio Operation (Cont) 1. AF - Alternative Frequency Press the AF button and the unit will choose the strongest FM signal for the selected station, so that you do not have to re-tune the station when driving between different transmitter coverage areas.
CD Operation (Cont) cally switch to Radio Mode. 2. Multi-Session CD Reading This unit can read multi-session CDs. The multi-session r eading will be activated automatically if the player detects a file that is written in multi-session format.
Press the |<< Button to go to a previous track. T rack numbers will be shown on the display . Press and hold the |<< Button to fast reverse. Disc will play normally when the >>| or |<< Button is released. 4. Play/ Pause CD On the Remote or Head Unit, press the “BND•ID3” button to pause the CD.
4. Scanning T racks On the Remote or Head Unit, press the 2 / I NT Button to play the first 10 seconds of each track. Press this button again to resume playback. 5. Repeat On the Remote or Head Unit, press the F/PS / R PT Button to repeat the same track continuously .
1. RCA Output The RCA Output Jacks are on the back of the unit. (Refer to Wiring Diagram) This out- put is for connecting an amplifier , equalizer , or other audio componement that requires a pre-amp out connection. (Red = Right, White = Left) Follow the manufacturers in- structions for the audio component that you are connecting.
20 Specifications GENERAL Operating Power ................................................................... 12 V olts DC, Negative Ground Output Wiring ............................................................ Designed for using four speakers only Maximum Output Power .
Limited W arranty VIRTUAL REALITY VIDEO LABS ® products are designed and manufactured to provide a high level of trouble- free performance. VIRTUAL REALITY VIDEO LABS® warrants, to the original purc.
An important point after buying a device Roadmaster VR500CS-BT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roadmaster VR500CS-BT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roadmaster VR500CS-BT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roadmaster VR500CS-BT you will learn all the available features of the product, as well as information on its operation. The information that you get Roadmaster VR500CS-BT will certainly help you make a decision on the purchase.
If you already are a holder of Roadmaster VR500CS-BT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roadmaster VR500CS-BT.
However, one of the most important roles played by the user manual is to help in solving problems with Roadmaster VR500CS-BT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roadmaster VR500CS-BT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
