Instruction/ maintenance manual of the product CP-250 Audiovox
Go to page of 2
MODEL CP-250 INST ALLA TION GUIDE FOR: Printed in Korea Form No. 128-4729A RADIO PREP ARA TION: 1. Select two of the five mounting tabs provided and match the radio mounting style of the vehicle accord- ing to Figures 1 through 3 below . NOTE: T ab number is st amped on bottom of tab.
FIG. 4 ANTENNA WIRE GROUNDING STRAP ADAPTOR HARNESS (supplied) M 6x1 8 SCREWS RADIO INST ALLA TION: 1. Remove dash panel from vehicle to expose sub-dash. 2. Remove and discard radio dummy panel attached to sub-dash. NOTE: Do not discard hardware for dummy panel.
An important point after buying a device Audiovox CP-250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox CP-250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox CP-250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox CP-250 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox CP-250 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox CP-250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox CP-250.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox CP-250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox CP-250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
