Instruction/ maintenance manual of the product CNP2000UCA Audiovox
Go to page of 17
PROTOCOL INTERFACE ADAPTER and XM DIRECT 2 TUNER CNP2000UCA "Compatible with Select Satellite Ready Car Stereos" Installation Guide.
Table of Contents Table of Contents 2 Introduction & Installation Overview 3 I nsta Ilation Basics ..... t. •••••••••••••••••••••••••••••.
Introduction & Installation Overview Thank you for purchasing the AUDIOVOX Protocol Interface Adapter for satellite radio ready car stereo head units. The Protocol Interface Adapter allows you to adapt a satellite radio ready car stereo to receive XM Satellite Radio service.
Installation Basics Note: Before installation, your PIA must have the proper radio model protocol downloaded. Please see an authorized dealer for programming of your PIA. When choosing a location to mount the components, care must be taken not to interfere with any of the vehicles existing systems.
2. If the vehicle has roof racks or skid ribs, it may be necessary to mount the antenna off-center. 3. If the vehicle roof does not provide sufficient metal surface area then the antenna can be mounted on the metal trunk lid at least 4" from the rear window.
2. For antenna mounting locations at the front or middle of the roof, the cable can be routed down along the door jam and into the car. In some cars, the cable may be brought into the vehicle through the grommet in the door jam which carries the power window and power lock wires.
Step 2 Connect the cable into the PIA. Plug the other end of the cable into the head unit (Cable sold separately). Read your cable installation manual for proper installation to your specific head unit. Step 3 Start your car and turn on your unit to confirm that the XM Direct system is properly connected.
StepS Return the car stereo head unit back to its original location in the dash board, be careful with cables that you just installed so that they do not unplug or get kinked by the head unit. Note: If you had removed screws to pull the car stereo head unit out please screw those back in.
XM Satellite Radio Operation Please refer to the "XM tuner control features" section of your cassette, CO or mobile video receiver manual for instructions on operating your XM satellite radio service. XM Radio lD 1. During XM Satellite Radio reception, press the Seek button to select "CHANNEL 0.
Troubleshooting No Sound • Adjust the volume control of the head unit. • Make sure that all of the cables between the PIA and the head unit and the tuner are securely plugged in. Advisory Message When a problem occurs with the XM Direct system, an error message will be indicated on the display of the head unit.
Troubleshf)oting (Cont) OFF AIR The channel currently selected has stopped broadcasting. • Automatically switches to valid channel. No action is required. LOADING The receiver is reading the channel information. • Wait until the XM tuner completes receiving the information.
~AUDIO"'O~ 12MONTHLIMITEDWARRANTY I I ~ Ri.F:CTRON1CS CORP. PROGRAMMABLEINTERFACEADAPTERCNP2000UCA AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of.
WARRANTY (Cant) THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TOTHE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities.
PRODUCT REGISTRATION PRODUCT PROTECTION: In case of an insurance loss such as fire, flood or theft, your registration will serve as proof of purchase. Thank you for purchasing an Audiovox product.
1. Locate XM Direct 2 Mini-USB port on module. 2. Attach XM Direct 2 USB programming cable. 3. Locate USB 2.0 port on your computer 4. Attach other end of XM Direct 2 programming cable. 5. Program XM Direct 2 module per latest website instructions. www.
.
CONTENTS INCLUDE: Interface Adapter XM Direct 2 Vehicle Tuner Magnetic Mount Antenna Programming Coble- CONNECTION CABLE REQUIRED Choose the proper XM Connection Cable for your car stereo.
An important point after buying a device Audiovox CNP2000UCA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox CNP2000UCA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox CNP2000UCA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox CNP2000UCA you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox CNP2000UCA will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox CNP2000UCA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox CNP2000UCA.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox CNP2000UCA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox CNP2000UCA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
