Instruction/ maintenance manual of the product R86006 RIDGID
Go to page of 18
1 Y ou r drill has been engineer ed and manufactur ed to our high standar ds for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance.
2 Introduction......................................................................................................................................................................2 General Safety Rules ..................................
3 GENERAL SAFETY RULES WARNING! RE AD AND UN DE RS T AN D ALL IN STR UC TI ONS . Failure to follow all instructions listed below , may r esult in elect ric sho ck, fir e and /or ser ious persona l injury . SA VE THESE INSTRUCTIONS WORK AREA Keep your work area clean and well lit.
4 SERVICE T ool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury . GENERAL SAFETY RULES When servicing a tool, use only identical replacement parts.
5 SYMBOLS Some of the following symbols may be used on this product. Please study them and lear n their meaning. Proper interpretation of these symbols will allow you to operate the pr oduct better and safer .
6 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair . When servic- ing, use only identical replacement parts.
7 FEA TURES PRODUCT SPECIFICA TIONS Chuck ...........................................................1/2 in. Keyless Motor .................................................................. 18 V olt DC Switch ..........................................
8 FEA TURES KNOW YOUR DRILL See Figure 1. The safe use of this prod uct requ ire s an underst andin g of the information on the product and in this operator’ s manual as wel l as a knowl edge of the pro ject you ar e attem ptin g. Befor e use of this product, familiarize yourself with all operating features and safety rules.
9 OPERA TION WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict sever e injury . WARNING: Always wear safety goggles or safety glasses with sid e shi eld s whe n ope rati ng pr od uct s.
10 OPERA TION TO INST ALL BA TTER Y P ACK See Figure 2. Lock the switch trigger on the drill by placing the direction of rotation (forward/reverse/center lock) selector in center position. Place battery pack in the drill. Align raised rib on battery pack with the groove inside the drill.
11 OPERA TION DIRECTION OF ROT A TION SELECTOR (FORWARD/REVERSE/CENTER LOCK) See Figure 3. The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger .
12 OPERA TION HI SPEED TWO-SPEED GEAR TRAIN (HI-LO) 1 2 LOW SPEED TWO-SPEED GEAR TRAIN See Figure 5. The drill has a two-speed gear train designed for drilling or dri ving at LO (1) or HI (2) speeds . A slid e swit ch is loc ated on top of the drill to select either LO (1) or HI (2) speed.
13 OPERA TION CHUCK BODY BIT STORAGE See Figure 8. When not in use, bits provided with the drill can be placed in the storage area located on the base of the drill. INST ALLING BITS See Figure 9. Lock the swi tch tri gger by placin g the direct ion of rota tion selector in the center position.
14 OPERA TION DRILLING See Figure 11. Check the direction of r otation selector for the correct setting (forward or r everse). Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotates. Hold the drill firmly and place the bit at the point to be drilled.
15 MAINTENANCE WARNING: When servicing use only identical RIDGID ® replacement parts. Use of any other parts may create a hazar d or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust.
16 MAINTENANCE CHUCK REMOV AL See Figures 12 - 14. The chuck may be removed and r eplaced by a new one. Lock the swi tch trig ger by placing the dir ect ion of rota tion selector in center position. Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely .
17 W ARRANTY Pro of o f pu rch as e m us t be p res en te d wh e n req ue st in g warranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after . This product is manufactured by One W orld T echnologies, Inc. The trademark is licensed from RIDGID, Inc.
OPERA TOR’S MANUAL 1/2 in. 18 V LITHIUM-ION DRILL TWO-SPEED/REVERSIBLE R86006 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center . Be sure to provide all relevant information when you call or visit.
An important point after buying a device RIDGID R86006 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID R86006 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID R86006 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID R86006 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID R86006 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID R86006, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID R86006.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID R86006. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID R86006 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
