Instruction/ maintenance manual of the product R7111 RIDGID
Go to page of 16
1 Y our drill has been engineered and manufactur ed to our high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance. WARNING: T o reduce the risk of injury , the user must read and understand the operator’ s manual before using this pr oduct.
2 Introduction ...................................................................................................................................................................... 2 General Safety Rules ......................................
3 GENERAL SAFETY RULES WARNING: Read all instructions. F a il u re t o f o l lo w al l instructions listed below may r esult in electric shock, fire and/or serious injury . The term “power tool” in all of the warnings listed below r efers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
4 GENERAL SAFETY RULES Use auxiliary handles supplied with the tool. Loss of control can cause personal injury . Hold power tools by ins ulate d grip ping surfac es whe n performing an operation where the cutting tool may contact hidden wiring or its own cord.
5 SYMBOLS Some of the foll owing symb ols may be used on this tool. Pleas e stu dy the m and learn the ir me aning. Pr oper inter pre tatio n of these symbols will allow you to operate the tool better and safer .
6 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the pr oduct to your near est AUTHORIZED SERVICE CENTER for repair . When servic- ing, use only identical replacement parts.
7 DOUBLE INSULA TION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with pr otect- ing insulation.
8 FEA TURES Fig. 1 PRODUCT SPECIFICA TIONS Chuck ....................................................................... 1/2 in. Switch ............................. VSR (V ariable Speed Reversible) No Load Speed ....................................0-850 r/min.
9 WARNING: If an y par ts ar e dam age d or mis sin g do not oper ate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury . WARNING: Do not attempt to modify this tool or cr eate accessories not recommended for use with this tool.
10 OPERA TION DIRECTION OF ROT A TION SELECTOR (FORWARD/REVERSE) See Figure 3. The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger .
11 OPERA TION USING THE AUXILIAR Y HANDLE ASSEMBL Y See Figure 6. Y our drill is equipped with an auxiliary handle assembly . For ease of operation, use the handle with either the left or right hand. The handle can be rotated 360°. T o adjust the auxiliary handle assembly: Loosen the handle assembly by tur ning the handle coun- terclockwise.
12 OPERA TION DRILLING See Figure 8. Depress and release the switch trigger to be sur e the drill is in the OFF position before connecting it to power supply . Check the dir ection of rotatio n selector for corr ect setti ng (forward or r everse).
13 MAINTENANCE WARNING: When servicing use only identical RIDGID replacement parts. Use of any other parts may create a hazar d or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust.
14 MAINTENANCE Look for these accessories where you pur chased this product: � High Speed Bits (For wood or metal) ...................................................................................................................... 1/2 in. � W ood Boring Bits .
15 W ARRANTY Pro of of p urch ase mu st b e p rese nte d wh en req ues tin g warranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after . This product is manufactured by One W orld T echnologies, Inc. The trademark is licensed from RIDGID, Inc.
16 OPERA TOR’S MANUAL 1/2 in. DRILL DOUBLE INSULA TED R7111 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center .
An important point after buying a device RIDGID R7111 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID R7111 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID R7111 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID R7111 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID R7111 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID R7111, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID R7111.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID R7111. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID R7111 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
