Instruction/ maintenance manual of the product R7100 RIDGID
Go to page of 20
1 ® This new two speed drill has been engineered and manufactured to our high standard for dependability , ease of operation and operator safety . When properly cared for , the drill will give you years of rugged, trouble-free performance.
2 ■ General Safety Rules ........................................................................................................... ........................................ 3-4 ■ Specific Safety Rules .............................................
3 W ARNING: Read and understand all instructions. Failure to fol- low all instructions listed below , may result in elec- tric shock, fire and/or serious personal injury . SA VE THESE INSTRUCTIONS W ork Area ■ Keep your work area clean and well lit.
4 Service ■ T ool service must be performed only by qualified re- pair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury . GENERAL SAFETY RULES SPECIFIC SAFETY RULES Additional Safety Rules ■ Know your power tool.
5 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the ool better and safer .
6 SPECIFICA TIONS Double Insulation Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation.
7 UNP ACKING Instructions When unpacking the drill: ■ Carefully remove the tool and accessories from the box. ■ Make sure that all items listed in the packing list are in- cluded. ■ Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
8 FEA TURES Before using this tool, familiarize yourself with all operating features and safety requirements. However , do not let familiarity with the tool make you careless. W ARNING: Exercise caution when using the drill. Careless ac- tions, for even a fraction of a second, can result in serious personal injury .
9 W ARNING: The tool should never be connected to a power sup- ply when you are assembling parts, making adjust- ments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will pre- vent accidental starting that could cause serious in- jury .
10 ASSEMBL Y Fig. 3 To Install Bits See Figure 3. 1. Unplug the drill. 2. Insert the chuck key and twist counterclockwise as shown in figure 3. 4. Insert the drill bit into the chuck the full length of the jaws. W ARNING: Do not insert drill bit into chuck jaws and tighten as shown in figure 4.
11 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury . Switch See Figure 5.
12 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury . T wo-Speed Settings See Figure 7.
13 W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury . Drilling See Figure 8.
14 ADJUSTMENTS Fig. 9 Chuck Removal See Figure 9 and 10. The chuck must be removed in order to use some accesso- ries. T o remove: 1. Unplug the drill. 2. Open chuck jaws using the provided chuck key . 3. Insert a 5/16 inch (8 mm) or larger hex key wrench into the chuck of the drill and tighten the chuck jaws securely .
15 MAINTENANCE W ARNING: When servicing use only identical RIDGID ® replace- ment parts. Use of any other parts may create a hazard or cause product damage. W ARNING: This tool should never be connected to a power sup- ply when you are assembling parts, making adjust- ments, cleaning, performing maintenance, or when the tool is not in use.
16 NOTES.
17 NOTES.
18 NOTES.
19 This product is manufactured under license from Ridgid, Inc. by One World Technologies, Inc. All warranty communications should be directed to One World Technologies, Inc.
20 ® OPERA T OR’S MANUAL R7100 T wo Speed/Reversible Double Insulated Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center .
An important point after buying a device RIDGID R7100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID R7100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID R7100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID R7100 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID R7100 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID R7100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID R7100.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID R7100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID R7100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
