Instruction/ maintenance manual of the product R5011 RIDGID
Go to page of 20
1 Y our hammer drill ha s been engineered and manufactured to our high standard for dependability , ease of operation, and operator safety . When pr operly cared for , it will give you years of rugged, trouble-fr ee performance.
2 Introduction ...................................................................................................................................................................... 2 General Safety Rules ......................................
3 GENERAL SAFETY RULES WARNING: Read all instructions. F a i l u re t o f o l l o w a l l instructions listed below may r esult in electric shock, fire and/or serious injury . The term “power tool” in all of the warnings listed below r efers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
4 GENERAL SAFETY RULES W ear ear pr otectors with impact drills. Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool.
5 SYMBOLS Some of th e fo llow ing symbol s m ay be use d o n th is tool. Please stu dy them and le arn th eir meanin g. Prope r i nter pr etat ion of these symbols will allow you to operate the tool better and safer .
6 SYMBOLS SERVICE Servicing requir es extreme car e and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SER VICE CENTER for r epair . When servic- ing, use only identical replacement parts.
7 DOUBLE INSULA TION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cor d. All exposed metal parts ar e isolated from the internal metal motor components with protect- ing insulation.
8 Fig. 1 FEA TURES PRODUCT SPECIFICA TIONS Chuck Capacity ......................................................... 1/2 in. Input ................................. 120 V , 60 Hz, AC only , 8.5 Amps Switch ...............................VSR (V ariable Speed Reversible) Hammer Speed .
9 KNOW YOUR HAMMER DRILL See Figure 1. The safe use of this product requir es an understanding of the information on the tool and in this operator’ s manual as wel l as a know led ge of the pro jec t y ou ar e attem ptin g. Befo r e use of this product, familiarize yourself with all operating features and safety rules.
10 DEPTH STOP ROD ASSEMBL Y INST ALLING AUXILIAR Y HANDLE ASSEMBL Y See Figure 2. An auxiliary handle is packed with the drill for ease of op- eration and to help prevent loss of contr ol. Open the clamping ring by turning the handle counter- clockwise.
11 OPERA TION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict sever e injury . WARNING: Always wear safety goggles or safety glasses with side shields when operating tools.
12 OPERA TION Fig. 6 TWO-SPEED GEAR SHIFT KNOB RIGHT Fig. 7 WRONG Fig. 8 DRILL BIT TO TIGHTEN CHUCK JA WS TWO-SPEED GEAR SHIFT KNOB See Figure 6. The drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A switch is located on the side of the drill to select either LO (1) or HI (2) speed.
13 DEPTH STOP ROD DRILL BIT TO DECREASE DRILLING DEPTH AUXILIARY HANDLE ASSEMBL Y TO INCREASE DRILLING DEPTH DRILLING DEPTH DEPRESS HERE TO ADJUST DEPTH STOP ROD OPERA TION SELECTING HAMMER MODE OR DRILLING MODE See Figure 10. T o adjust for type of drilling, slide the selector on top of the motor housing to hammer mode or drilling mode.
14 OPERA TION WARNING: Before connecting the drill to a power supply sour ce, always check to be sur e it is not in lock-on position (depress and release the switch trigger). Failure to ensure that it is not locked-on could result in accidental starting of the drill resulting in possible serious injury .
15 WOOD DRILLING� For maximum performance, use high speed steel bits for wood drilling.� Select normal drilling mode.� Begin drilling at a very low speed to prevent the bit from slipping off the starting point. Increase the speed as the drill bit bites into the material.
16 MAINTENANCE CHUCK REMOV AL See Figures 14 - 16. The chuck may be removed and r eplaced with a new one. Unplug the drill. Open chuck jaws using the provided chuck key . Insert a 5/16 inch (8 mm) or larger hex key into the chuck of the drill and tighten the chuck jaws securely .
17 W ARRANTY Pro of of pu rc ha se m u st b e p res en te d wh en req ue st in g warranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after . This product is manufactured by One W orld T echnologies, Inc. The trademark is licensed from RIDGID, Inc.
18 NOTES.
19 NOTES.
20 OPERA TOR’S MANUAL 1/2 in. HAMMER DRILL DOUBLE INSULA TED R5011 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center .
An important point after buying a device RIDGID R5011 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID R5011 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID R5011 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID R5011 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID R5011 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID R5011, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID R5011.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID R5011. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID R5011 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
